1. Important Safety Instructions
For your protection, read and understand all instructions before use. Keep this manual for future reference.
- Use: For household use only. Use only as described in this manual.
- Condition: Do not use if the product is damaged in any way.
- User: Intended for persons aged 18 and above. Persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, may use only under close supervision and if they understand the hazards involved.
- Always prioritize safety. Contact the manufacturer with any questions.

Manufacturer: Guangzhou Aicai Technology Co., Ltd.
Address: Room 709, No. 68, Gangwan Road, Huangpu District, Guangzhou
2. Product Overview
The MOSFET Trigger Switch Drive Module is a high-power electronic switch control board designed for various DC applications. It features a dual MOS parallel active output, providing robust control for devices such as motors, bulbs, and LED strips. This module is compatible with PWM signals, allowing for precise control over motor speed and light brightness.
Key Features:
- High Power Output: Dual MOS parallel active output, delivering a continuous current of 15A (up to 30A with auxiliary cooling) and a maximum power of 400W at room temperature.
- Wide Voltage Range & PWM Support: Operates within a DC 5V to 36V range and supports PWM signals from 0-20KHz. It accepts digital signals from DC 3.3V to 20V, making it compatible with microcontroller IO ports, PLC interfaces, and other DC power sources.
- Robust Output Capability: Capable of controlling high-power devices including motors, light bulbs, LED strips, DC motors, mini water pumps, and solenoid valves.
- Infinite Switching Lifespan: Designed for long-term reliability and uninterrupted performance.
- Compact Design: Measures 34mm x 17mm x 12mm (1.34 x 0.67 x 0.47 inches), facilitating easy integration into various projects.
3. Specifications
| Parameter | Value |
|---|---|
| Type | Module |
| Operating Voltage | DC 5V - 36V |
| Trigger Signal Source | Digital High/Low Levels (DC 3.3V - 20V), Microcontroller IO, PLC Interface, DC Power Supply, PWM Signal (0 - 20KHz) |
| Output Capacity | DC 5V - 36V, Continuous Current 15A (room temp), Max Power 400W, Max Current 30A (with auxiliary cooling) |
| Service Life | Unlimited Switching |
| Working Temperature | -40°C to 85°C |
| Size | 34mm x 17mm x 12mm (1.34 x 0.67 x 0.47 inches) |
| Origin | Mainland China |

4. Setup and Connections
The module features screw terminals for easy and secure connections. Ensure all connections are firm before applying power.
Connection Points:
- VIN+ / VIN-: These terminals are for the main power input to the module. Connect your DC power supply (5V-36V) here.
- GND / TRIG/PWM: These terminals are for the control signal input. Connect the ground of your control source (e.g., microcontroller, PLC) to GND, and the control signal (digital high/low or PWM) to TRIG/PWM. The signal voltage should be between 3.3V and 20V.
- OUT+ / OUT-: These terminals are for connecting your load (e.g., motor, LED strip, bulb). Connect the positive terminal of your load to OUT+ and the negative terminal to OUT-.


5. Operating Instructions
Once properly wired, the module acts as an electronic switch controlled by the signal applied to the TRIG/PWM input.
- Digital Control: Apply a high-level signal (3.3V-20V) to TRIG/PWM to turn the output ON, and a low-level signal (0V) to turn the output OFF.
- PWM Control: For applications requiring variable control, such as motor speed adjustment or LED brightness dimming, apply a Pulse Width Modulation (PWM) signal to the TRIG/PWM input. The module supports PWM frequencies from 0 to 20KHz. The duty cycle of the PWM signal will determine the average power delivered to the load.
- Compatibility: This module is designed to interface seamlessly with microcontrollers (like Arduino), PLC systems, and other digital control circuits.
6. Maintenance
To ensure the longevity and optimal performance of your MOSFET Trigger Switch Drive Module, follow these maintenance guidelines:
- Keep Dry: Avoid exposure to moisture or liquids, which can damage electronic components.
- Cleanliness: Keep the module free from dust and debris. Use a soft, dry brush or compressed air for cleaning.
- Heat Dissipation: For continuous operation at high currents (above 15A, up to 30A), ensure adequate auxiliary cooling (e.g., a heatsink or fan) is provided to prevent overheating of the MOSFETs.
- Static Protection: Handle the module with care, especially in environments prone to static electricity, to prevent damage to sensitive components.
7. Troubleshooting
If you encounter issues with your module, consider the following common troubleshooting steps:
- No Power/Output:
- Check all power connections (VIN+, VIN-, OUT+, OUT-) for proper polarity and secure contact.
- Verify that the input voltage (5V-36V) is within the specified operating range.
- Ensure the control signal (TRIG/PWM) is correctly applied and within the 3.3V-20V range.
- Incorrect Control/Intermittent Operation:
- Confirm the control signal source is functioning correctly and providing a stable signal.
- Check for loose wiring or cold solder joints.
- If using PWM, ensure the frequency is within the 0-20KHz supported range.
- Overheating:
- Reduce the load current or provide auxiliary cooling if operating near or above the continuous 15A rating.
- Ensure proper ventilation around the module.
8. User Tips
- This module can be effectively used to control airsoft motors, providing variable speed control when paired with a suitable PWM signal.
- When driving inductive loads (like motors or solenoids), consider adding a flyback diode across the load to protect the MOSFET from voltage spikes.
- For projects requiring multiple modules, consider purchasing in bulk for cost-effectiveness.
9. Warranty and Support
For detailed information regarding product warranty, technical support, or further inquiries, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download here.
You may also contact the manufacturer, Guangzhou Aicai Technology Co., Ltd., for assistance.