1. Introduction
The Xtool N9EV Smart Diagnostic System is a professional diagnostic tool specifically designed for China Electric Vehicles (EVs). It offers comprehensive diagnostic capabilities, including basic system checks, EV-specific functions, and various common service resets. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your N9EV device.
2. Package Contents
Upon opening your Xtool N9EV Smart Diagnostic System, please verify that all items listed below are present and in good condition:

Figure 2.1: Xtool N9EV Diagnostic Kit Contents

Figure 2.2: Xtool N9EV System Components
- N9EV Diagnostic Tablet
- VCI (Vehicle Communication Interface) Module
- Main Diagnostic Cable
- Various OBD-II Adapters and Connectors
- Power Adapter
- USB Cable
- Quick Start Guide
- Protective Carrying Case

Figure 2.3: Xtool N9EV Product Packaging
3. Initial Setup
- Charge the Tablet: Before first use, fully charge the N9EV diagnostic tablet using the provided power adapter.
- Power On: Press and hold the power button on the tablet until the screen illuminates.
- Initial Configuration: Follow the on-screen prompts to select your preferred language (English and Russian are supported), set up Wi-Fi, and configure other basic settings.
- Connect VCI: Connect the VCI module to the diagnostic tablet via the USB cable or wirelessly (if supported).
- Software Update: Ensure the device has the latest software by connecting to Wi-Fi and checking for updates. Free online updates are supported for 3 years.
4. Operating Instructions
The Xtool N9EV offers a range of diagnostic and service functions. Below is an overview of its capabilities.
4.1. Basic Diagnosis Functions
The system supports standard diagnostic procedures for various vehicle systems.

Figure 4.1: Basic Diagnosis and EV Features Overview
4.2. EV-Specific Features
The N9EV is equipped with specialized functions for electric vehicles:
- Battery Pack Test
- AC Compressor Test
- 48V Motor Test
- OBC (On-Board Charger) Test
- DCDC (DC-DC Converter) Test
- TPMS Functions (Tire Pressure Monitoring System)
4.3. Full System Diagnose
The tool provides comprehensive full system diagnostics, including:
- Full Special Functions
- ECU Configuration
- DTC Guide Function
- BMW Test Plan
- Offline Coding
- Programmable Module Installation
- Online ECU Coding
- Online ECU Programming
4.4. Common Services
A wide array of common service functions are supported:

Figure 4.2: Common Services (Part 1)

Figure 4.3: Common Services (Part 2)
Note: In the function tables, 'Y' indicates that the function is supported, and 'N' indicates it is not supported.
4.5. Video Overview
Video 4.1: Xtool N9EV Smart Diagnostic System Overview
5. Supported Vehicles
The Xtool N9EV is designed to support a wide range of China Electric Vehicles and other brands. Specific models are continuously updated.
5.1. Key Supported EV Brands and Models:
- Zeeker: 001, 009, X (full functions completed)
- Nio: ES6, ES8, EC6 (basic functions completed)
- Voyah: All series (full functions completed)
- Avat: Models up to 2024.4
- Geely: Monjaro electric, Galaxy series (expected by 2024.4)
- Hiphi: Under analysis and development (expected within 4 months from Dec 2023)
- Lixiang: Most models (expected within 4 months from Dec 2023), L7, L8, L9 (estimated before June 2024)
- Hongqi: E-HS9

Figure 5.1: EV Model Selection Interface
5.2. Extensive Vehicle Coverage:
The N9EV supports a broad range of vehicle manufacturers. For a detailed list, please refer to the following tables:

Figure 5.2: Supported Vehicle Brands (Part 1)

Figure 5.3: Supported Vehicle Brands (Part 2)

Figure 5.4: Supported Vehicle Brands (Part 3)

Figure 5.5: Supported Vehicle Brands (Part 4)
6. Maintenance
6.1. Software Updates
The Xtool N9EV system supports free online updates for a period of 3 years from activation. Regularly check for and install updates to ensure optimal performance, access to the latest vehicle models, and new diagnostic functions.
6.2. Cleaning and Storage
- Keep the tablet and VCI module clean and free from dust and moisture. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures or direct sunlight.
- Store the device and all accessories in its protective carrying case when not in use to prevent damage.
7. Troubleshooting
If you encounter issues with your N9EV device, consider the following general troubleshooting steps:
- Device Not Powering On: Ensure the tablet is fully charged. If it still doesn't power on, try connecting it to the power adapter and attempting to power on again.
- Connection Issues: Verify that the VCI module is securely connected to the vehicle's OBD-II port and properly paired with the tablet (via USB or Bluetooth). Check for any loose cable connections.
- Software Freezes/Crashes: Restart the tablet. If the issue persists, ensure the software is up to date.
- Diagnostic Function Not Working: Confirm that the vehicle model and year are correctly selected. Ensure the VCI is properly communicating with the vehicle. Some functions may not be supported for all vehicle models (refer to the 'Y=YES, N=No' tables).
For persistent or complex issues, please contact technical support.
8. Specifications
| Feature | Detail |
|---|---|
| Product Model | N9EV |
| Origin | Mainland China |
| Package Length | 40 cm |
| Package Width | 40 cm |
| Package Height | 20 cm |
| Package Weight | 7.5 kg |
| Software Updates | Free online updates for 3 years |
| Supported Languages | English, Russian, and others |
9. User Tips
- Always ensure your device software is up-to-date to benefit from the latest vehicle coverage and features.
- When performing diagnostics, ensure the vehicle's ignition is on (or in 'Ready' mode for EVs) and the battery has sufficient charge.
- For specific vehicle models or complex diagnostic procedures, consult the vehicle's service manual in conjunction with the N9EV system.
10. Warranty and Support
The Xtool N9EV Smart Diagnostic System includes free online software updates for 3 years. For technical assistance, inquiries, or further information, please contact the manufacturer or authorized distributor.
You may also reach out via Telegram/WhatsApp: +8613928729644.