1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your SIYI FR Receiver and FR Mini Receiver. These receivers are designed for use with FT24 and FM30 Transmitters, offering long-range telemetry, S.Bus, and PWM control capabilities for various RC applications, particularly airplanes.


2. Key Features
Both the FR Receiver and FR Mini Receiver offer advanced functionalities for reliable remote control:
- Voltage Telemetry
- RSSI Telemetry
- Wireless Binding
- OTA Firmware Update (Over-The-Air)
- 16-Channel S.BUS support
- 8-Channel PWM / PPM support
- Radio and Datalink capabilities
- Compatibility with FT24 / FM30 Transmitters
The FR Receiver also supports USB Firmware Update via PC port.


3. Setup Instructions
3.1. Component Overview
Familiarize yourself with the receiver's components:

- ANT1/ANT2: Antenna ports for signal reception. Ensure antennas are positioned for optimal signal.
- PWR/S.BUS: Power input and S.Bus signal output.
- UART: Datalink port for telemetry and connection to flight controller serial port.
- PWM1-8: Individual PWM channel outputs (FR Receiver only).
3.2. Connecting to Flight Controller
To utilize telemetry and advanced control features, connect the receiver to your flight controller's serial port. A Bluetooth module can be added to the transmitter (FT24) to enable the system to receive and analyze flight information telemetry based on the Mavlink protocol.
For the FR Receiver, use the UART port for datalink connection. For the FR Mini Receiver, the UART port serves the same function.
3.3. Powering the Receiver
- FR Receiver: Requires a working voltage of 5V to 8.4V.
- FR Mini Receiver: Requires a working voltage of 5V.
Ensure the power supply matches the specified voltage range for your receiver model to prevent damage.
3.4. Wireless Binding
The receivers support wireless binding with compatible FT24 / FM30 Transmitters. Refer to your transmitter's manual for specific binding procedures. Generally, this involves putting both the transmitter and receiver into binding mode, allowing them to establish a secure connection.
4. Operating Instructions
4.1. Signal Output Modes
Both receivers support multiple signal output modes:
- S.Bus: 16 channels for advanced flight controllers.
- PPM: 8 channels.
- PWM: 8 channels (FR Receiver only).
Configure your flight controller and transmitter to use the desired signal output mode.
4.2. Telemetry Functionality
The receivers provide real-time telemetry data:
- Model Power Battery Voltage: Monitor the voltage of your model's main battery.
- Receiver Power Supply Voltage: Monitor the voltage supplied to the receiver.
- RSSI Telemetry: Receive real-time signal strength indication.
Telemetry voltage ranges:
- FR Receiver: 0 - 50 V
- FR Mini Receiver: 0 - 26 V
Ensure your transmitter is configured to display telemetry data.
5. Maintenance
5.1. Firmware Updates
Both receivers support Over-The-Air (OTA) wireless firmware upgrading directly from the FT24 remote controller. The FR Receiver also supports firmware upgrading through its PC USB port.
Regularly check the manufacturer's website for the latest firmware versions to ensure optimal performance and access to new features.
5.2. Cleaning and Storage
- Keep the receiver clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the receiver to moisture or extreme temperatures.
- Store the receiver in a dry, cool place when not in use.
5.3. Antenna Care
Ensure antennas are not bent sharply or damaged. Proper antenna placement is crucial for reliable signal reception and range.
6. Troubleshooting
- No Signal/Loss of Control:
- Check binding status between receiver and transmitter. Re-bind if necessary.
- Verify antenna connections and placement. Ensure they are not obstructed or damaged.
- Check power supply to the receiver. Ensure voltage is within the specified range.
- Ensure the transmitter is powered on and operating correctly.
- Incorrect Telemetry Readings:
- Verify all telemetry wiring connections are secure.
- Check the telemetry voltage range compatibility with your model's battery.
- Ensure firmware is up to date on both receiver and transmitter.
- Firmware Update Issues:
- Ensure a stable power supply during USB firmware updates (FR Receiver).
- For OTA updates, ensure the transmitter is in close proximity and has sufficient battery.
- Refer to the specific firmware update guide provided by SIYI.
7. Specifications
Below is a detailed comparison of the FR Receiver and FR Mini Receiver specifications:

| Feature | FR Receiver | FR Mini Receiver |
|---|---|---|
| Dimension (L x W x H) | 51.5 x 38 x 13 mm | 24 x 15 x 3 mm |
| Net Weight | 20 g | 1.5 g |
| Working Voltage | 5 ~ 8.4 V | 5 V |
| Telemetry Voltage | 0 ~ 50 V | 0 ~ 26 V |
| Signal Output | 16 CH S.Bus, 8 CH PPM, 8 CH PWM | 16 CH S.Bus, 8 CH PPM |
| Datalink Port | UART | UART |
| Antenna Gain | 2 dBi | 2 dBi |
| RF Power | 23 dBm | 23 dBm |
| Frequency Band | 2400 ~ 2483 MHz | 2400 ~ 2483 MHz |
| Latency | 10 ms (protocol mode) | 10 ms (protocol mode) |
| Operating Temperature | -10 ~ 55 °C | -10 ~ 55 °C |
| Material | Composite Material | Composite Material |
8. User Tips
- For optimal range and signal stability, ensure antennas are mounted away from carbon fiber or metal parts and are oriented at a 90-degree angle to each other.
- Always perform a range check before flying, especially after any changes to your setup.
- Keep your firmware updated to benefit from performance improvements and bug fixes.
9. Warranty and Support
The product comes with a 12-month warranty. For technical support, firmware downloads, or further assistance, please visit the official SIYI website or contact your retailer.