Reobrix 77004

Contents

Reobrix 77004 M416 Assault Rifle Building Block Model

Instruction Manual

1. Introduction

Thank you for choosing the Reobrix 77004 M416 Assault Rifle Building Block Model. This DIY small particle toy set allows you to construct a detailed replica of the M416 assault rifle using 1188 high-quality ABS plastic pieces. Designed for enthusiasts aged 14 and above, this model offers an engaging and educational building experience, promoting hand-eye coordination and problem-solving skills. Please read this manual carefully before beginning assembly to ensure a smooth and enjoyable building process.

Reobrix 77004 M416 Assault Rifle Building Block Model
Figure 1: The Reobrix 77004 M416 Assault Rifle Building Block Model.

2. Safety Warnings

  • Choking Hazard: This product contains small parts and is not suitable for children under 3 years old. Keep all building blocks and packaging materials away from young children.
  • Recommended Age: This model is recommended for ages 14+ years and above due to its complexity and number of pieces.
  • Material Safety: Made from ABS environmental protection plastic.
  • California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • General Warning: No Eat No Eurn (Do not ingest or burn parts).
  • Projectile Warning: The model features a bullet launch mechanism. The shooting intensity is moderate. DO NOT SHOOT AT PEOPLE OR ANIMALS.

3. Package Contents

Your Reobrix 77004 M416 Building Block Model package should contain the following items:

  • 1188 x Small Particle Building Blocks (ABS Plastic)
  • 1 x Instruction Manual (this document)

Please check all contents upon receipt. If any parts are missing, refer to the 'Warranty & Support' section.

4. Specifications

FeatureDetail
Product NameM416 Assault Rifle Building Block Model
Model Number77004
BrandReobrix
TypeSmall Particle Building Blocks
Number of Pieces1188 Pcs
MaterialABS Environmental Protection Plastic
Recommended Age14+ years and above
GenderUnisex
Block ShapeSelf-Locking Bricks
Is ElectricNo Battery
Product Dimensions (L x W x H)67.5 cm x 7 cm x 30 cm
Box Dimensions (L x W x H)47 cm x 7 cm x 30 cm
CertificationCE Certified
OriginMainland China
Product and Box Dimensions
Figure 2: Product and packaging dimensions.
M416 Building Block Gun Labeled Parts
Figure 3: Labeled parts of the M416 building block gun, showing Muzzle, Aim Points, Trigger, and Grip.

5. Assembly Instructions

Follow the detailed steps provided in the included manual and the diagrams below to assemble your Reobrix M416 model. Take your time and ensure each piece is securely connected.

5.1 General Assembly Tips

  • Organize your pieces by color and shape before starting.
  • Follow the steps in the manual sequentially. Do not skip steps.
  • Ensure blocks are tightly assembled to prevent parts from falling off.
  • If a piece doesn't fit easily, double-check the instructions and the piece orientation. Do not force pieces together.

5.2 Key Assembly Steps

The following images illustrate critical steps for operating the assembled model, which are typically part of the final assembly or functional setup.

Loading Bullets and Installing Magazine
Figure 4: Step 1 - Loading bullets into the magazine. Step 2 - Installing the loaded magazine onto the gun model.
  1. Loading Bullets: Load the provided small projectile pieces into the magazine component. Ensure they are inserted correctly as shown in Figure 4.
  2. Install the Magazine: Once loaded, install the magazine onto the designated slot on the gun model. It should click securely into place.
Adjusting Buttstock and Bullet Launch
Figure 5: Step 3 - Adjusting the buttstock. Step 4 - Operating the bullet launch mechanism.
  1. Adjust Butt: Press and hold the buckle on the buttstock to adjust its length. Position it according to your preference for comfortable handling, as indicated in Figure 5.
  2. Bullet Launch: Once the model is fully assembled and bullets are loaded, you can operate the bullet launch mechanism. Refer to Figure 5 for the general operation. Remember, the shooting intensity is moderate, and it is crucial to NEVER SHOOT AT PEOPLE OR ANIMALS.

6. Operating Instructions

After successful assembly, your Reobrix M416 model is ready for display or play. The primary interactive feature is the bullet launch mechanism.

  • Loading: Follow 'Step 1: Loading Bullets' and 'Step 2: Install the Magazine' from the assembly section to prepare the model for firing.
  • Firing: Aim the model in a safe direction, away from people, animals, or fragile objects. Pull the trigger to launch the small projectiles.
  • Buttstock Adjustment: Adjust the buttstock length as described in 'Step 3: Adjust Butt' for comfortable handling during play or display.

Important: This is a toy model. Do not modify the launch mechanism or use unauthorized projectiles. Always prioritize safety.

7. Maintenance

To ensure the longevity and appearance of your Reobrix M416 building block model, follow these simple maintenance guidelines:

  • Cleaning: Dust the model regularly with a soft, dry cloth or a soft brush. For stubborn dirt, lightly dampen a cloth with water (no harsh chemicals) and gently wipe the affected area.
  • Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures to prevent discoloration or deformation of the plastic.
  • Handling: Handle the model with care to avoid accidental disassembly or damage to delicate parts.

8. Troubleshooting

If you encounter any issues during assembly or operation, consider the following common solutions:

  • Missing Pieces: Double-check all packaging materials. If pieces are genuinely missing, refer to the 'Warranty & Support' section for assistance.
  • Blocks Not Fitting: Ensure you are using the correct pieces for the current step and that they are oriented correctly. Refer to the instruction manual's diagrams. Do not force pieces.
  • Model Falls Apart: This usually indicates that blocks were not pressed together firmly enough during assembly. Re-examine the connections and ensure they are tightly assembled.
  • Bullet Launch Malfunction: Ensure the magazine is correctly installed and loaded. Check for any obstructions in the firing mechanism or barrel.

9. User Tips

  • Patience is Key: Building complex models takes time and patience. Don't rush the process; enjoy each step.
  • Work Area: Use a clean, well-lit, and spacious work area to prevent losing small pieces.
  • Part Separation: If you have difficulty separating tightly connected blocks, a brick separator tool (not included) can be very helpful.
  • Display: Once assembled, this model makes an excellent display piece. Consider a stable surface away from high traffic areas.

10. Warranty & Support

Reobrix is committed to providing high-quality products. If you encounter any issues or require support, please refer to the following:

  • Missing Parts: If you find missing parts after receiving the goods, please contact the seller or customer service in time. We will arrange for the missing parts to be reissued to you free of charge.
  • General Inquiries: For any other questions or support needs, please contact your point of purchase or the official Reobrix customer service channels.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.