Joyroom JR-CCN18

Contents

Joyroom JR-CCN18 125W Mini Pull Ring Car Charger

User Instruction Manual

Product Introduction

The Joyroom JR-CCN18 is a 2-port mini car charger designed to deliver a high-power output of up to 125W, enabling simultaneous fast charging for two devices. It supports a wide range of fast-charging protocols including PD3.0, QC3.0, PPS, Samsung AFC, and Huawei FCP.

Its compact, space-saving design ensures it fits snugly into your car's cigarette lighter socket without protruding, maintaining a tidy vehicle interior. An innovative pull-ring design facilitates easy removal of the charger when needed. The charger is constructed from fire-retardant PC material, which, combined with improved heat dissipation, ensures optimal operating temperature and safe, reliable charging. It is certified with multiple safety standards including UL, CE, FCC, and RoHS.

Equipped with dual-core intelligent identification chips (PD65W and QC60W), the charger intelligently identifies the charging needs of connected devices, preventing damage. Safety features include overcurrent, overvoltage, overload, overtemperature, and short-circuit protection.

Joyroom JR-CCN18 car charger with glowing USB-C and USB-A ports
The Joyroom JR-CCN18 Mini Pull Ring Car Charger.
Comparison of 125W Joyroom charger with 67W charger, showing faster charging times
Visual comparison highlighting the 125W total output and faster charging capabilities.
Mini size car charger with flush fit and pull ring design
The compact, mini size and innovative pull ring design for easy handling.

Packing List

  • Charger × 1
  • User Manual × 1
  • Warranty Card × 1

Specifications

FeatureSpecification
ModelJR-CCN18
InputDC 12V-24V ⎓ 6.0A (Max)
USB-C Output5/9/12V ⎓ 3.0A, 15V ⎓ 3.0A, 20V ⎓ 3.25A
PPS3.3-11V ⎓ 3.0A
USB-A Output5/9/12V ⎓ 3.0A, 10V ⎓ 2.25A, 20V ⎓ 3.0A
USB-C + USB-A Output5V ⎓ 3.0A (Note: Dual-port simultaneous use will not support fast charging)
Total Output125W (Max, when used individually with compatible devices)
MaterialPC (Fire-retardant)
Size39.6 x 20.7 x 20.7mm
Net Weight13g
CertificationsCE, UL, FCC, RoHS

Note: All data were measured in the JOYROOM lab. Results may vary due to changes in actual use conditions.

Setup and Installation

  1. Ensure your vehicle's engine is started before inserting the car charger.
  2. Insert the Joyroom JR-CCN18 car charger firmly into your vehicle's cigarette lighter socket. The compact design ensures a flush fit.
  3. The charger is ready for use once inserted.
Car charger inserted flush into a car's cigarette lighter socket
The charger's flush fit design when installed in a vehicle.
Hand demonstrating the pull ring design for easy removal of the car charger
Utilizing the pull ring for hassle-free removal.

Video demonstrating the compact size, flush fit, and pull ring design of the car charger.

Operating Instructions

  1. Once the charger is installed and the car engine is running, connect your device(s) to the appropriate port(s) using a compatible charging cable.
  2. For fast charging, ensure you are using a fast charging cable that supports the protocols (PD3.0, QC3.0, PPS, Samsung AFC, Huawei FCP) compatible with your device.
  3. The USB-C port supports up to 65W output, and the USB-A port supports up to 60W output.
  4. Important Note: The 65W power output for a single port is primarily supported by 24V vehicles. When both USB-C and USB-A ports are used simultaneously, the total output will be 5V ⎓ 3.0A, and fast charging protocols will not be active for either port.
Devices charging rapidly in a car using the 125W car charger, showing percentage charged in 30 minutes for MacBook Air, iPad Pro, iPhone, and Samsung
Examples of rapid charging for various devices including laptops, tablets, and smartphones.
Fast Charger 125W with PD 65W and QC 60W labels
Visual representation of the 125W total output with individual port capabilities.
iPhone and Samsung Galaxy phones charging with PD3.0 65W, showing 90% charge in 30 minutes
Full speed charging for iPhone and Samsung Galaxy devices.
Laptop charging with PD3.0 65W, showing 60% charge in 30 minutes for MacBook Air
Fast charging for laptops and tablets.

Safety Information and Precautions

The Joyroom JR-CCN18 car charger is designed with multiple safety features to protect your devices and vehicle. Please adhere to the following precautions:

  • Multi-Shield Protection: Built-in AI independent chips provide Overcurrent Protection, Overvoltage Protection, Overtemperature Protection, and Short-circuit Protection.
  • Fire-Retardant Material: The PC casing is fire-retardant, enhancing safety during operation.
  • Keep the device away from children.
  • Do not disassemble the product. Disassembly by non-professionals is strictly prohibited.
  • Do not use electrical appliances or loads that exceed the output current of this product. Automatic protection will activate, and no output will be provided.
  • Avoid fierce physical actions such as knocking, throwing, trampling, or squeezing the device.
  • Do not charge high-power devices if it risks damaging the device due to excessive power.
  • Do not use the charger in wet environments or during thunderstorms.
  • Do not clean the device with strong chemicals, cleaning agents, or corrosive substances.
  • Protect the product from collision, as it is an electronic device.
Diagram showing multi-shield safety features including overcurrent, overvoltage, overtemperature, and short-circuit protection
Multi-shield safety features with independent chips to protect your devices.
Car charger surrounded by burnt cigarette lighter sockets, illustrating its fire-retardant shell
The fire-retardant certified shell protects your safety on the road.

Maintenance

  • Keep the charger clean and dry. Wipe with a soft, dry cloth if necessary.
  • Store the charger in a cool, dry place when not in use.
  • Avoid exposing the charger to extreme temperatures or direct sunlight for prolonged periods.
  • Regularly check the ports for any debris or damage.

Troubleshooting

  • Charger light is on, but device is not charging:
    - Ensure the charging cable is securely connected to both the charger and your device.
    - Verify that your charging cable is functional and not damaged.
    - Check if your device is compatible with the charger's output specifications.
    - Confirm the car engine is running, as some vehicles require this for the cigarette lighter socket to be active.
  • Slow charging or no fast charging:
    - Ensure you are using a fast charging cable that supports the required protocols (PD3.0, QC3.0, PPS, etc.).
    - If charging two devices simultaneously, fast charging is not supported for either port. For optimal speed, charge one device at a time.
    - The 65W output is primarily for 24V vehicles. For 12V vehicles, the maximum output may be lower.
  • Charger does not fit flush or sticks out:
    - The charger is designed for universal 12V-24V cigarette lighter sockets. If it protrudes significantly, ensure it is fully inserted. Some vehicle designs may have slightly different socket depths.
  • No Bluetooth connectivity:
    - This product is a car charger and does not feature Bluetooth connectivity.
  • LED color cannot be changed:
    - The LED indicator light on the charger has a fixed color (typically blue) and cannot be changed.

User Tips

  • Discreet Design: Many users appreciate the charger's compact, flush-fit design, which makes it almost invisible once installed and prevents it from being accidentally knocked while driving.
  • Easy Removal: The innovative pull-ring design is highly praised for making removal from the cigarette lighter socket effortless, especially given its small size.
  • Quality Build: The metallic construction provides a premium feel and durability.
  • L-Shaped Cables: For vehicles with covers or drawers over the cigarette lighter socket, using an L-shaped USB-C connector can allow for nearly complete closure, maintaining a neat appearance.

Warranty and Support

Thank you for your purchase! Joyroom offers a lifetime warranty for this product.

To activate your lifetime warranty or to receive hassle-free support within 24 hours for any product questions, please feel free to contact us anytime at support@joyroom.com.

Manufacturer: Shenzhen Nito Power Source Technology Co., Ltd.

Address: 201-7, Building 2, Shihua Lixing Fengda Industrial Factory, No. 49 Wuhe Avenue South, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China.

Tel: +86 (0)755 28282125

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.