FMS FCX18 LC80

Contents

FMS 1/18 FCX18 LC80 RC Car Control Cabin User Manual

Model: FCX18 LC80 | Brand: FMS

1. Introduction

This manual provides detailed instructions for the assembly, installation, and maintenance of your FMS 1/18 FCX18 LC80 RC Car Control Cabin. This product is designed as an upgrade part to enhance the realism and detail of your 1/18 scale FCX18 LC80 RC car.

2. Package Contents

Please inspect the package carefully to ensure all components are present and undamaged. The package typically includes:

  • 1x Control Cabin Interior (Black plastic)
  • 1x Clear Car Shell (for interior fitment)
  • 1x Driver Figure Head (choice of light or dark skin tone)
  • Assorted Screws and Washers for assembly
Components of the FMS 1/18 FCX18 LC80 RC Car Control Cabin, including the clear car shell, black interior cabin, screws, washer, and a light-skinned driver head.
Figure 2.1: Typical package contents with light-skinned driver head.
Components of the FMS 1/18 FCX18 LC80 RC Car Control Cabin, including the clear car shell, black interior cabin, screws, washer, and a dark-skinned driver head.
Figure 2.2: Typical package contents with dark-skinned driver head.

3. Specifications

FeatureDetail
Brand NameFMS
ModelFCX18 LC80 Control Cabin
MaterialPlastic
For Vehicle TypeCars (RC)
Upgrade Parts/AccessoriesCar Shell, Interior
Tool Supplies CategoryAssembled class
Recommended Age14+ years
UseVehicles & Remote Control Toys
Quantity1 pcs
Is ElectricNo Battery
Batteries IncludedNo

4. Setup and Installation

This control cabin is designed for assembly and installation into your FMS 1/18 FCX18 LC80 RC car. Follow these general steps:

  1. Prepare the Car Shell: Ensure your existing clear car shell is clean and ready for interior installation.
  2. Assemble the Interior Cabin:
    • Carefully attach the driver figure head to the main interior cabin piece.
    • Secure any additional interior details (if applicable) using the provided screws or by snapping them into place.
    Assembled black interior cabin with a light-skinned driver figure seated, viewed from an elevated angle.
    Figure 4.1: Assembled interior cabin with driver figure (light skin).
    Assembled black interior cabin with a dark-skinned driver figure seated, viewed from an elevated angle.
    Figure 4.2: Assembled interior cabin with driver figure (dark skin).
  3. Install into Car Shell: Carefully place the assembled interior cabin into the clear car shell. Align the mounting points.
  4. Secure the Cabin: Use the provided screws and washers to secure the interior cabin to the car shell. Ensure it is firmly in place but do not overtighten screws to avoid damaging the plastic.
  5. Final Check: Verify that the interior is securely mounted and does not interfere with any moving parts or electronics of your RC car.

5. Operating the Control Cabin

The FMS 1/18 FCX18 LC80 RC Car Control Cabin is a static, decorative upgrade part. Once installed, it functions by enhancing the visual realism of your RC vehicle. No active operation is required from the control cabin itself.

6. Maintenance

To ensure the longevity and appearance of your control cabin:

  • Cleaning: Use a soft, dry cloth to gently wipe away dust and debris. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by drying thoroughly. Avoid harsh chemicals or abrasive cleaners.
  • Storage: When not in use, store your RC car (with the cabin installed) in a cool, dry place away from direct sunlight to prevent material degradation or discoloration.
  • Inspection: Periodically check for any loose screws or connections and tighten them as needed.

7. Troubleshooting

Issue: Interior cabin does not fit perfectly.
Solution: The product is designed for a close fit (approximately 95%). Minor adjustments or trimming of the plastic may be required for a perfect fit, especially if your RC car has custom modifications or a brushless motor setup that might interfere with the interior space.
Issue: Interior feels flimsy after installation.
Solution: Ensure all screws are tightened appropriately. While the material is plastic, proper installation should provide sufficient stability. Handle the RC car with care to avoid undue stress on the interior components.

8. User Tips

  • For a more realistic look, consider painting certain details of the interior cabin or driver figure before final assembly.
  • If you have a brushless motor setup in your FCX18 LC80, be prepared to make minor modifications (e.g., trimming) to the interior cabin for optimal fitment.
  • Handle the interior components with care during assembly and installation, as some parts may be delicate.
  • This product offers an educational experience through the assembly process, allowing for customization and enhancement of your RC vehicle.

9. Warranty and Support

For any questions regarding product defects, missing parts, or technical assistance, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

10. Safety Information

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

This product is intended for users aged 14 years and older. Adult supervision is recommended for younger users during assembly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.