1. Introduction
Welcome to the Atomi E20 Electric Scooter user manual. This guide provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new electric scooter. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.
The Atomi E20 is designed for efficient commuting and enjoyable trips, featuring a powerful motor, long-range battery, and smart app integration for an enhanced riding experience.
2. Safety Information
Your safety is paramount. Always adhere to the following guidelines:
- Always wear a helmet and appropriate protective gear (knee pads, elbow pads) when riding.
- Check the brakes, tire pressure, and overall condition of the scooter before each ride.
- Obey all local traffic laws and regulations.
- Avoid riding in heavy rain, snow, or on slippery surfaces. The scooter has an IPX4 waterproof rating, meaning it is protected against splashing water from any direction, but it is not fully submersible.
- Do not ride under the influence of alcohol or drugs.
- Maintain a safe distance from other vehicles and pedestrians.
- Do not perform stunts or sudden maneuvers.
- Ensure the scooter is properly folded and locked when carrying or storing.
- The maximum load capacity is 120 kg (265 lbs). Do not exceed this limit.
3. Package Contents
Upon opening your Atomi E20 Electric Scooter package, please verify that all the following items are included:
- 1 x Atomi E20 Electric Scooter
- 1 x Charger (1.5A)
- 1 x User Manual (this document)
If any items are missing or damaged, please contact customer support immediately.
4. Assembly and Initial Setup
The Atomi E20 Electric Scooter features a convenient one-step folding system for easy portability and quick setup.
4.1 Unfolding the Scooter
- Place the scooter on a flat surface.
- Release the folding mechanism. This typically involves a latch or lever near the base of the handlebar stem.
- Carefully lift the handlebar stem until it clicks into place, indicating it is fully upright and locked. The Automatic Locking Mechanism provides double insurance for security.
- Ensure all locking mechanisms are securely engaged before riding.


4.2 Initial Charge
Before your first ride, fully charge the scooter's battery. Refer to the 'Charging' section for detailed instructions.
4.3 Tire Check
Ensure the 8.5-inch air tires are properly inflated to the recommended pressure. Under-inflated tires can affect performance and range.
5. Operating Instructions
The Atomi E20 is designed for intuitive operation. Familiarize yourself with its controls before riding.
5.1 Powering On/Off
- To power on: Press and hold the power button on the LED display until the screen illuminates.
- To power off: Press and hold the power button until the display turns off.
5.2 Speed Modes
The scooter offers three speed gears to suit different riding conditions:
- Gear 1: Up to 10 km/h
- Gear 2: Up to 20 km/h
- Gear 3: Up to 25 km/h
Use the control button on the display to cycle through the speed modes.
5.3 Braking
The Atomi E20 is equipped with a reliable dual braking system:
- Front Electric Brake: Activated by a lever on the handlebar. Provides regenerative braking.
- Rear Disc Brake: Activated by a separate lever on the handlebar. Provides strong mechanical stopping power.
Always use both brakes simultaneously for optimal stopping performance and safety.

5.4 LED Display and Smart App
The integrated LED display provides real-time information, and the smart app offers extended control and features.


- LED Display: Shows current speed, battery level, and trip information.
- Smart App: Connect via Bluetooth to access features such as:
- Navigation Map
- Digital Lock
- Speed Mode selection
- Riding Record tracking
- Cruise Control activation
- Detailed Battery Level monitoring
- Light Control
- LCD Display Dashboard customization
5.5 Lights
The Atomi E20 is equipped with safety lights for visibility.


- Front Light: Turn on for visibility in low-light conditions.
- Rear Brake Light: Illuminates when braking to alert others.
- Side Reflectors: Enhance side visibility.
6. Charging
Proper charging practices extend battery life and ensure safe operation.
6.1 Charging Procedure
- Ensure the scooter is powered off before charging.
- Locate the charging port on the scooter.
- Connect the charger to the charging port, then plug the charger into a standard electrical outlet.
- The charging indicator on the charger will typically show red during charging and turn green when fully charged.
- Charging time is approximately 5 hours for a full charge.
- Once fully charged, disconnect the charger from the outlet first, then from the scooter.
6.2 Battery Care

- Avoid completely draining the battery before recharging.
- Store the scooter in a cool, dry place when not in use, ideally with the battery charged to about 50-70%.
- Do not expose the battery to extreme temperatures (below -10°C or above 40°C). The optimal operating temperature is 20°C to 30°C.
7. Maintenance
Regular maintenance ensures the longevity and safe operation of your Atomi E20 Electric Scooter.
7.1 Cleaning
- Wipe the scooter with a damp cloth after each ride to remove dirt and dust.
- Do not use high-pressure water jets or corrosive cleaning agents.
- Ensure the charging port cover is securely closed to prevent water ingress.
7.2 Tires
- Regularly check the tire pressure and inflate as needed. Refer to the tire sidewall for recommended pressure.
- Inspect tires for wear, punctures, or damage. Replace worn tires promptly.
7.3 Brakes
- Periodically check the brake levers for proper tension and responsiveness.
- Inspect the disc brake pads for wear. Replace if necessary.
7.4 Storage
- When storing for extended periods, ensure the battery is charged to 50-70% and recharge every 30-60 days to prevent deep discharge.
- Store in a dry, cool environment away from direct sunlight and extreme temperatures.
8. Troubleshooting
This section addresses common issues you might encounter with your Atomi E20 Electric Scooter.
8.1 Scooter Not Turning On
- Check Battery: Ensure the battery is charged. Connect the charger and see if the charging indicator lights up.
- Power Button: Make sure you are pressing and holding the power button correctly.
8.2 Reduced Range or Power
- Battery Charge: Ensure the battery is fully charged.
- Tire Pressure: Check and inflate tires to the recommended pressure. Low tire pressure significantly impacts range.
- Riding Conditions: Steep inclines, heavy loads, and aggressive riding can reduce range.
8.3 Brakes Not Responsive
- Brake Levers: Check if the brake levers are loose or damaged.
- Brake Pads: Inspect the rear disc brake pads for wear.
- Cables: Ensure brake cables are not frayed or disconnected.
For issues not covered here, or if problems persist, please contact customer support.
9. Specifications
Detailed technical specifications for the Atomi E20 Electric Scooter:
10. Warranty and Support
For warranty information, technical support, or any questions regarding your Atomi E20 Electric Scooter, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty claims.