QYT CB-27

Contents

QYT CB-27 Car Radio Instruction Manual

Model: CB-27 | Brand: QYT

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your QYT CB-27 Car Radio. Please read this manual thoroughly before using the device to ensure proper function and safety.

Video: QYT CB-27 Product Overview

2. Package Contents

Ensure all items are present and in good condition upon unpacking:

  • 1 x QYT CB-27 CB band radio
  • 1 x Microphone with speaker
  • 1 x Plastic handle (Mounting Bracket)
  • 1 x Fuse
  • 2 x Sets of fixing screws
  • 1 x English User Manual
  • 1 x MAG-1345 Antenna
QYT CB-27 radio with microphone, MAG-1345 antenna, and connector

Image: QYT CB-27 radio, microphone, and MAG-1345 antenna components.

3. Setup and Installation

3.1 Power Connection

  • The QYT CB-27 operates on a 12V or 24V power supply. Ensure your vehicle's power system matches this requirement.
  • Connect the red wire to the positive (+) terminal and the black wire to the negative (-) terminal of your vehicle's power source.
  • Caution: Incorrect voltage or polarity can damage the radio. Use with caution and verify connections before powering on.
  • Install the provided fuse in the power line for protection.

3.2 Antenna Installation

  • Attach the MAG-1345 antenna to a suitable mounting point on your vehicle, ensuring it has a good ground plane for optimal performance.
  • Connect the antenna cable to the antenna connector on the back of the CB-27 radio.
  • Ensure the antenna cable is routed safely, away from moving parts and heat sources, and is not pinched.
MAG-1345 antenna with cable and connector, showing dimensions

Image: MAG-1345 antenna with cable and connector, showing approximate dimensions.

3.3 Microphone Connection

  • Plug the microphone cable into the designated MIC port on the front of the radio.

3.4 Mounting the Radio

  • Use the provided plastic handle (mounting bracket) and fixing screws to securely mount the radio in a convenient location within your vehicle, ensuring it does not obstruct driving or airbags.
QYT CB-27 radio with microphone and mounting bracket

Image: QYT CB-27 radio with microphone and mounting bracket.

4. Operating Instructions

4.1 Power On/Off

  • Press the power button (usually marked with a red circle or power symbol) to turn the radio on or off.
  • The radio features Automatic Power ON, which can be configured.

4.2 Channel Selection and Frequency Display

  • Use the channel selector knob or UP/DW buttons on the microphone to change channels.
  • The TFT LCD screen will display the current channel or frequency.
  • The radio supports 8 Memory Channels and 6 Programmable keys for quick access to frequently used channels.

4.3 Mode Selection (AM/FM)

  • Toggle between AM (Amplitude Modulation) and FM (Frequency Modulation) modes as required for communication.

4.4 Squelch Control (ASQ / Manual)

  • Automatic Squelch (ASQ): Activates automatically to suppress background noise.
  • Customizable Manual Squelch: Adjust the squelch level manually to fine-tune noise reduction.

4.5 RF Gain

  • Adjust the RF Gain to control the sensitivity of the receiver, useful in areas with strong or weak signals.

4.6 Dual Watch (DW) / Rescanning

  • The Dual Watch function allows monitoring two channels simultaneously.
  • Use the Rescanning feature to scan through channels for activity.

4.7 Emergency Channels (9/19)

  • Quickly access Channel 9 (emergency) and Channel 19 (travel information) using dedicated functions.

4.8 Noise Filters (NB/ANL, Hi-Cut)

  • Activate NB/ANL (Noise Blanker/Automatic Noise Limiter) and Hi-Cut filters to reduce various types of electrical interference and high-frequency noise.

4.9 KeyLock and Mute Function

  • Use KeyLock to prevent accidental changes to settings.
  • The Mute function silences the audio output temporarily.

4.10 Backlight Adjustment

  • Adjust the backlight intensity of the TFT LCD screen for optimal visibility in different lighting conditions.
QYT CB-27 radio with microphone, on a road with a truck in the background, highlighting features

Image: QYT CB-27 radio in a vehicle setting, illustrating key features.

5. Maintenance

  • Keep the radio clean and free from dust and moisture. Use a soft, dry cloth for cleaning.
  • Avoid exposing the radio to extreme temperatures or direct sunlight for prolonged periods.
  • Ensure all connections (power, antenna, microphone) are secure and free from corrosion.
  • The full alloy body is designed for heat radiation; ensure adequate ventilation around the unit.

6. Troubleshooting

6.1 No Power

  • Check power connections for proper polarity and secure fit.
  • Verify the fuse is intact. Replace if blown.
  • Ensure the vehicle's power supply is providing 12V or 24V.

6.2 No Reception/Transmission

  • Check antenna connection and ensure it is properly installed and grounded.
  • Verify the correct channel and mode (AM/FM) are selected.
  • Adjust squelch level; if set too high, it may block weak signals.
  • Ensure RF Gain is not set too low.

6.3 Excessive Noise

  • Activate NB/ANL Filters and Hi-Cut Filter to reduce interference.
  • Adjust manual squelch to an appropriate level.
  • Check for external sources of electrical interference in the vehicle.

6.4 Overvoltage Protection Activated

  • If the radio shuts down due to overvoltage, check your vehicle's power system for voltage spikes or incorrect voltage output.

7. Specifications

FeatureDescription
DisplayTFT LCD Screen (colors)
Power Supply12V / 24V
Output Power4 Watts
ModesAM / FM
Memory Channels8
Programmable Keys6
SquelchAutomatic Squelch (ASQ), Customizable Manual Squelch
FiltersNB/ANL Filters, Hi-Cut Filter
ProtectionOvervoltage protection, TOT (Time out timer)
Special FunctionsDTMF Encoder, RF Gain, Automatic Channel Search (Scan), Dual Watch (DW), Programmable Beep Function, Channel 9/19, Backlight Adjustment, Automatic Power ON, KeyLock, Mute Function, Microphone with UP/DW buttons, Programmable by computer, Full alloy body for heat radiation, Programmable keyboard, Wireless microphone control (optional), Mobile operation via application (optional), Flexible menu and programming software, Rescanning

8. User Tips

  • Regional Frequency Compatibility: The QYT CB-27 operates within the 26.965-27.405 MHz range. If operating in a region with different CB band plans (e.g., New Zealand AM CB band with Channel 1 at 26.33 MHz), the radio may need to be reprogrammed or tuned by a qualified technician to comply with local regulations and ensure proper functionality. Consult your local CB radio regulations.
  • Antenna Tuning: For optimal performance, ensure your antenna is properly tuned (low SWR) for the operating frequency range. An untuned antenna can lead to poor transmission/reception and potential damage to the radio.
  • Power Supply Caution: While the radio supports both 12V and 24V, always double-check your vehicle's voltage before connecting to prevent damage.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.