1. Introduction
This manual provides detailed instructions for the DykbRadio DP to EDP Driver Board, designed to convert DisplayPort (DP) signals to Embedded DisplayPort (EDP) for use with 30-pin and 40-pin computer LCD display screens. It supports resolutions up to 4K and 8K with refresh rates up to 120Hz, depending on the board variant.
2. Safety Warnings and Precautions
- WARNING: Stay away from children and avoid misoperation.
- WARNING: Please do not disassemble or modify this product by yourself. Non-professional repairs may cause damage or safety accidents.
- Do not use in damp or dusty environments.
- Avoid severe impact or vibration on the product.
- It is prohibited to plug and unplug EDP cables with power. There is a possibility of damaging the screen. If you want to unplug the cables, you must first turn off the power in order. All ports must be unplugged before unplugging the EDP cables.
3. Product Overview
The DP to EDP Driver Board (Model: YC-DP-EDP 1.0) is available in 30-pin and 40-pin variants, designed to interface with various EDP-compatible LCD panels. It features a Type-C port for power input and a DisplayPort for signal input.


4. Specifications
| Feature | Description |
|---|---|
| Brand Name | DykbRadio |
| Model Number | DP EDP signal adapter board |
| Type | DP to EDP driver board |
| DIY Supplies | Electrical |
| Working Voltage | 4.2-5V; 2-3A |
| Power Input | TYPE-C (USB-A to Type-C cable required) |
| Signal Input | DP (DisplayPort to DisplayPort cable or HDMI to DisplayPort cable) |
| Signal Output | EDP30/40 (30PIN for 2LAN, 40PIN for 4LAN) |
| Max EDP Screen Power | 15W |
| Backlight Voltage | 12V |
| Driving Voltage | 3.3V |
| Button Count | 50,000 times |
| Working Temperature | -40 to 85 ℃ |
| Dimming Frequency | 20KHZ |
| Max Resolution (EDP30-2lan) | 2560 * 1440 |
| Max Resolution (EDP40-4lan) | 1920 * 1080 300HZ, 2560 * 1440 240HZ, 3840 * 2160 120Hz (downward compatible) |
| Origin | Mainland China |
Compatible Screens (Examples):
- N-card compatible: B156ZAN05.1 (4k 120Hz), 1080p 300Hz, 1080p 240Hz, Ne173qhm ny2, MNF601EA1-1, Ne156qhm_Ny2, N156kme
- A-card compatible: N156KME-GNA(2K165hz), B133ZANxx.x, B156ZANxx.x, NE156QUMxxx, LQ156M1JWxx, B156HANxx.x, NV156QUM-N72, LTN156FLxx, MNG007DA1-1, B156HAN08.2/0, LQ156D1JW02, NV156FHM-N4N/K, N161HCA GA1, B156ZAN03.2, NV156FHM-NY0, N156hra ea1
5. Setup and Installation
5.1. Pre-Installation Check
Before connecting the driver board, ensure your LCD screen supports EDP signal output. LVDS signals are NOT supported. The model number is typically found on the back of the screen. Search for this model number online to confirm EDP compatibility.



5.2. Connection Steps
- Connect the EDP Cable: Carefully connect the 30-pin or 40-pin EDP cable from your LCD screen to the corresponding port (P29) on the driver board. Ensure the connection is secure and correctly oriented.
- Connect Power: Use a USB-A to Type-C cable to provide power to the driver board via its Type-C port. The working voltage is 4.2-5V, requiring 2-3A.
- Connect Signal Input: Connect your DisplayPort source (e.g., computer, graphics card) to the DP input port on the driver board using a DP to DP cable or an HDMI to DP cable. Note: The board does not support signal conversion via adapter heads (e.g., DP to HDMI converter heads).



6. Operation
6.1. Power On/Off
The product starts in a shutdown state. A short press of the button on the board will power it on. Pressing it again will shut it down. The initial brightness of the backlight upon startup is 90%.
6.2. Indicator Light
If the blue indicator light on the board is illuminated, it confirms that the driver board is receiving power and functioning.
6.3. Brightness Control
The single button on the board also controls brightness. Hold down the button to adjust brightness. Double-click the button to toggle the backlight on/off.
7. Troubleshooting
- No Display / Screen Does Not Light Up:
- Ensure the blue indicator light on the driver board is on, indicating it's powered.
- Verify that your screen model is indeed EDP compatible and not LVDS.
- Try uninstalling and reinstalling your graphics driver, then reboot your computer.
- Update your graphics card drivers to the latest version.
- Note that EDP interfaces are generally not compatible with Nvidia graphics cards; most AMD graphics cards support it.
- Ensure you are using a direct DP to DP cable or HDMI to DP cable. Converter heads (e.g., DP to HDMI converter) are not supported.
- Coil Whine / High-Frequency Squeak: Some users have reported a high-frequency squeak. This may be due to component resonance. If it's too disruptive, consider contacting support.
- Overheating: If the cable or board gets very hot, immediately disconnect power. Ensure proper ventilation and that the power supply meets the specified requirements (4.2-5V, 2-3A).
- Incorrect Cable Type: Ensure the EDP cable (30-pin or 40-pin) matches your screen's connector. Some users have received cables that do not match the description (e.g., 40-pin to 40-pin instead of 30-pin to screen).
8. User Tips
- The board's single button controls brightness when held down, and a double-click turns the backlight on/off.
- For optimal performance, always use direct DisplayPort connections without additional adapters or converters.
- If you experience issues, especially with no display, double-check all cable connections and ensure your screen is genuinely EDP compatible.
9. Warranty and Support
For detailed warranty information and technical support, please refer to the official product page or contact the seller directly. A user manual in PDF format is available for download: User Manual (PDF).