1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your SINOVCLE Car Keyless Entry System. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
1.1 Product Overview
The SINOVCLE Car Keyless Entry System is designed to provide convenient and secure remote control over your vehicle's central locking system. It offers features such as remote lock/unlock, trunk release, car search, and power window closing (if supported by your vehicle).
Image: SINOVCLE Car Keyless System control box, wiring harness, and two remote keys.
1.2 Features
- Remotely lock and unlock your car doors.
- Direction light flashing for visual confirmation.
- LED indicator for system status.
- Remote car location (car search function).
- Remote trunk release (requires electronic trunk lock).
- Rising power window control (requires power window closer).
- Universal compatibility for most 12V cars.
1.3 Package Contents
The kit includes the following components:
Image: Contents of the SINOVCLE Car Keyless Entry System kit, including control box, wiring, warning light, two keys, and manual.
- 1 x Control Box
- 1 x Line Set (Wiring Harness)
- 1 x Warning Light
- 2 x Remote Keys
- 1 x User Manual (Physical copy)
Note: Due to customs limitations, the remote keys do not include batteries. Please prepare CR2016 batteries yourself. Each key requires 2 CR2016 batteries, for a total of 4 batteries for the kit.
2. Setup and Installation
Important Safety Notice: Installation of this system should ideally be performed by a certified professional technician at an automotive service center. If you choose to install it yourself, please proceed with extreme caution and ensure all steps are followed precisely. Improper installation can damage the product or your vehicle.
2.1 Compatibility
- This system is designed for vehicles with a 12V power supply system.
- The ground wire must be properly grounded.
- Do NOT install this system in 24V vehicles, as it will cause damage.
2.2 Pre-Installation Checks
- Ensure the vehicle's power is off before starting any wiring.
- Verify all components are present as listed in Section 1.3.
- Have the necessary tools ready (wire strippers, crimpers, multimeter, etc.).
2.3 Control Box and Antenna Connection
The control box is the central unit of the keyless entry system. Ensure the antenna is securely connected to the control box.
Image: Control box with antenna connection point and specifications. Note the tight fit for the antenna to prevent it from falling off.
Caution: To prevent the antenna from falling off, the connector is relatively tight. Please ensure you insert it firmly into place when installing.
2.4 Wiring Instructions
Detailed wiring instructions are crucial for correct installation. Please refer to the physical user manual included in your kit for specific wiring diagrams and connection points for your vehicle model. The wiring harness (line set) will connect the control box to your vehicle's electrical system.
Warning: Do not turn on the power until the power cord is properly connected to prevent burning the machine.
Ensure all connections are secure and insulated to prevent short circuits. Incorrect wiring can lead to system malfunction or damage to the vehicle's electrical components.
3. Operating Instructions
The SINOVCLE Car Keyless Entry System is operated using the provided remote keys. Familiarize yourself with the key buttons and their functions.
3.1 Remote Key Functions
Image: Remote key highlighting button functions and specifications.
- Lock Button: Press to lock all car doors. The direction lights will flash once, and a single beep sound will be emitted (if connected to car horn/beeper).
- Unlock Button: Press to unlock all car doors. The direction lights will flash twice, and two beep sounds will be emitted (if connected to car horn/beeper).
- Open the Trunk (Long Press): Long press this button to remotely open the car trunk. This function works only if your car has an electronic trunk lock.
- Car Search Button: Press this button to locate your car. The car lights will flash and the horn will sound for 15 seconds. Press any key to stop this function. This function is available on 4-button remote keys.
Image: Illustration of remote lock/unlock functionality and effective range.
The maximum remote control distance is between 30-80 meters, depending on environmental conditions.
Image: Illustration of remote trunk release.
3.2 Advanced Functions (Refer to Rich Functions Table)
Image: Table detailing various functions of the keyless entry system.
- Window Closing:
- Windows can close automatically 25 seconds after door locking.
- Windows can close automatically after pressing the key lock button.
- Matching with More Keys: To program additional remote keys, press the button at the back of the control box, then press any button on the new key.
4. Maintenance
4.1 General Care
- Clean the control box and remote keys with a dry cloth only.
- Avoid placing the product in humid environments or near water to prevent electric shock or damage.
- Do not attempt to repair the power fuse without professional guidance. Improper fuse use can cause damage or fire.
4.2 Remote Key Battery Replacement
When the remote key's range decreases or it stops responding, it may be time to replace the batteries. The remote keys use CR2016 batteries (two per key).
- Carefully open the remote key casing.
- Remove the old CR2016 batteries.
- Insert two new CR2016 batteries, ensuring correct polarity.
- Close the remote key casing securely.
5. Troubleshooting
If you encounter issues with your SINOVCLE Car Keyless Entry System, please refer to the following common problems and solutions. For complex issues, it is recommended to consult a professional technician.
| Problem | Possible Cause & Solution |
|---|---|
| System does not respond to remote key. |
|
| Central lock not working. |
|
| Trunk release not working. |
|
| Window closing function not working. |
|
| No light or sound signal upon lock/unlock. |
|
6. Specifications
| Attribute | Value |
|---|---|
| Brand Name | SINOVCLE |
| Type | Anti-Theft Device One-Way |
| Feature | Remote Central Lock |
| Type of Accessory | Alarm Key Mold |
| Type of Remote Control | Without LCD Remote Control |
| Remote Control Included | Yes (2 keys) |
| Voltage | 12V ± 2V |
| Current | <15MA |
| Frequency | 433.92MHZ |
| Max Control Distance | 30-80 Meters (environment dependent) |
| Key Button Durability | ≥ 300,000 Presses |
| Key Battery Type | CR2016 (2 per key) |
| Package Length | 18 cm |
| Package Width | 12 cm |
| Package Height | 3 cm |
| Package Weight | 0.15 kg |
| Origin | Mainland China |
| Certification | CE |
7. User Tips
- Professional Installation: For optimal performance and to avoid potential damage, professional installation by a qualified technician is highly recommended.
- Battery Check: Always ensure your remote keys have fresh CR2016 batteries for reliable operation. Keep spares if possible.
- Universal Compatibility: This system is designed to be universal for 12V cars. While it should work with most models like a Chevrolet Optra, always ensure your vehicle's specific wiring and features (e.g., electronic trunk lock, power windows) are compatible with the system's advanced functions.
- No Alarm Function: Please note that this product provides keyless entry and central locking control but does not include an alarm function.
- Consult Physical Manual: Always refer to the detailed wiring diagrams and specific instructions in the physical user manual included in your kit for precise installation and troubleshooting.
8. Warranty and Support
For any further questions, technical assistance, or support regarding your SINOVCLE Car Keyless Entry System, please contact the seller's customer service. Product UI or functions may be modified and upgraded from time to time without notice. It is normal if the manual has some discrepancies.
Important: The PDF manual linked in the product description is for a "Car MP5 Player" and is NOT relevant to this Car Keyless Entry System. Please refer to the physical manual included in your product kit for accurate instructions and wiring diagrams.
