Introduction
Thank you for purchasing the lessdot LED Capybara Night Light and Alarm Clock. This multi-functional device combines a charming capybara design with practical features including an alarm clock, night light, countdown timer, and temperature display. Please read this manual carefully to ensure proper use and to fully enjoy all its features.
Package Contents
- 1 x Capybara Night Light and Alarm Clock Unit
- 1 x USB-C Charging Cable
- 1 x User Manual (English/Chinese)
Specifications
| Feature | Detail |
|---|---|
| Product Name | Capybara Night Light / Capybara Alarm Clock |
| Model Number | BD-AC-17 |
| Weight | 125g |
| Dimensions | 138 x 116 x 58 mm |
| Materials | ABS, HIPS, Silicone |
| Color Temperature | 3000K |
| Light Colors | Red, Orange, Yellow, Green, Blue, Purple (Magic Color Mode) |
| Battery Capacity | 1200mAh / 3.7V |
| Rated Power | 3W |
| Wattage | 0-5W |
| Charging Time | 4 hours |
| Battery Life | High light: 8 hours; Low light: 200 hours |
| Interface Type | USB-C |
| Voltage | 5V |
| Dimmable | Yes |
| Light Source | LED |
| Application | Bedroom, Desktop Decoration |
Setup
- Initial Activation: For first-time use, please plug in the device with the provided USB-C cable and a compatible power adapter (not included) to activate the product.
- Placement: Ensure the Capybara Night Light is placed on a stable, flat surface. It should not be placed on a plane with a tilt angle greater than 6 degrees to prevent it from falling.
- Charging: Connect the USB-C charging cable to the charging port on the back of the device and to a power source. The battery status indicator will show the charging status.

Operating Instructions
General Functions
- Display: The device features an HD display that shows time, date, temperature, and power status simultaneously.
- Adjustments: Use the control buttons on the back (Time adjustment, Alarm clock, Increase/Decrease) to set various parameters.

Alarm Clock
- Setting Alarms: You can set up to three independent alarm clocks. Refer to the detailed instructions in the PDF manual for specific steps.
- Snooze Function: When an alarm sounds, gently touch the top of the Capybara to activate the snooze function. The alarm will sound again after 5 minutes.
- Volume Adjustment: The alarm volume is adjustable.

Night Light Functions
The Capybara Night Light offers various lighting modes for a soft and warm ambiance.
- Warm Light Mode: Tap the Capybara to turn on the warm light. Tap again to cycle through three levels of brightness. A final tap will turn off the light.
- Stepless Dimming: The warm light mode supports stepless dimming for precise brightness control.
- Delay Mode (15 minutes): In this mode, tapping the Capybara turns on the warm light (with three brightness levels). The light will automatically turn off after 15 minutes.
- Magic Color Mode: Tap the Capybara to activate the magic color light. Successive taps will cycle through a sequence of colors: Magic → Red → Orange → Yellow → Green → Cyan → Blue → Purple. A final tap will turn off the light.

Countdown Timer
The device includes a countdown timer function, capable of timing up to 99 minutes.
- Activating Countdown: Double-click the orange button (located on top, under the screen) to turn on the countdown function.
- Countdown Reminder: A bell will sound when the countdown reaches zero.
- Stopping Countdown: Press the orange button to close the countdown function.

Display Modes
- Always-On Mode: Switch to the “always-on” mode to keep the display continuously active.
- Energy Saving Mode: In this mode, the display will turn off after 8 seconds. To wake up the display, touch the top button.
Battery Status Display
- Charging: The power indicator will be continuously on.
- Fully Charged: The power indicator will turn off.
- Low Battery: The power indicator will flash.
Maintenance
- Clean the device regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Keep the device away from water and excessive moisture.
- Avoid dropping the device or subjecting it to strong impacts.
- The light source is not replaceable. When the light source reaches the end of its life, the entire light fixture should be replaced.
Troubleshooting
- Device not turning on: Ensure the device is fully charged or connected to a power source. For first-time use, it must be plugged in to activate.
- Display not visible: If in Energy Saving Mode, touch the top button to wake the display. Check battery level.
- Alarm not sounding: Check if the alarm is set correctly and enabled. Ensure the volume is not set to minimum.
- Night light not working: Ensure the device is powered on and not in a mode that disables the light.
- Charging issues: Verify the USB-C cable is securely connected to both the device and the power adapter. Try a different cable or adapter if necessary.
User Tips
- If you prefer the display to be continuously on, it is recommended to keep the device plugged in, as the battery life will be significantly shorter in always-on mode.
- The device displays temperature. While not explicitly stated, many similar devices allow switching between Celsius and Fahrenheit. Check the full PDF manual or experiment with the 'Time adjustment' buttons for this setting.
- The alarm volume is adjustable, allowing you to customize how loud the alarm sounds to suit your preference.
Frequently Asked Questions (FAQ)
- Q: How efficient is this product in terms of energy consumption?
A: It has an energy efficiency level of 0-5W. - Q: Where can I use this product?
A: This product is suitable for application in bedrooms and as a desktop decoration. - Q: What kind of light source does it use?
A: It uses an LED light source. - Q: Can I change the temperature display from Celsius to Fahrenheit?
A: The device displays temperature. While not explicitly detailed in this summary, many similar devices offer this option. Please consult the full user manual (PDF) for specific instructions on temperature unit settings. - Q: How loud does the alarm clock sound?
A: The alarm clock's volume is adjustable, allowing you to set it to your preferred loudness.
Warranty and Support
This product comes with a 12-month warranty from the date of sale. Customers are eligible for free service at the point of sale within this 12-month period. Paid service is available after the warranty period, provided a purchase record is presented.
Warranty Exclusions:
- Products not manufactured by Xiamen Bandian Originality Technology Co., LTD.
- Damage caused by force majeure events (e.g., earthquake, fire).
- Damage due to human factors, including unauthorized disassembly, modification of components, or improper installation, storage, and use not in accordance with the instructions.
Manufacturer Information:
Xiamen Bandian Originality Technology Co., LTD
3rd Floor, No.1709–1, Dianqian Community, Huli District, Xiamen, Fujian Province, China
Zip Code: 361006
Web: www.bandian.cc
Tel: 0592-5082991
For a comprehensive guide, you can download the official User Manual (PDF) from the seller's website or by scanning the QR code provided in the physical manual.
Xiamen Bandian Originality Technology Co., LTD reserves all rights for the final explanation of warranty terms.