Introduction
The Jonsbo Z20 is a portable M-ATX computer case designed for compact desktop environments, offering high compatibility for various hardware configurations. This manual provides detailed instructions for assembly, installation, and maintenance to ensure optimal performance and longevity of your system.
Video: Jonsbo Z20 Computer Case Product Overview
Specifications
| Feature | Specification |
|---|---|
| Model | Z20 |
| Dimensions (w/o handle/feet) | 370mm (D) x 186mm (W) x 295mm (H) |
| Dimensions (with handle/feet) | 382mm (D) x 198mm (W) x 335mm (H) |
| Case Material | SPCC Steel, Tempered Glass |
| Motherboard Support | Mini-ITX, Micro-ATX |
| Expansion Slots | 4 |
| Net Weight | 5kg |
| Front I/O Ports | 1x USB 3.2 Gen 1 Type-A, 1x USB 3.2 Gen 2 Type-C, 1x Headphone & Microphone |
| CPU Air Cooler Clearance | Max 164mm (Intel CPU) / 163mm (AMD CPU) |
| Radiator Support (Top) | Up to 240mm |
| Max GPU Length | 363mm (depends on other hardware configurations) |
| Max PSU Length | 180mm (recommended ≤140mm, depends on other hardware configurations) |
| PSU Support | SFX/SFX-L, ATX PS2 |
| Drive Bays | Up to 3x 2.5" SSD, Up to 1x 3.5" HDD (quantities depend on other hardware configurations) |
| Fan Support | Top: 2x 120mm/140mm; Rear: 1x 120mm/92mm; Bottom: 2x 120mm/140mm (depends on other hardware configurations) |

Image: Jonsbo Z20 Case Dimensions (376mm x 186mm x 295mm without protrusions, 382mm x 198mm x 335mm with protrusions)

Image: Jonsbo Z20 Case Size Comparison with D30 and D31 MATX cases, highlighting its compact form factor.
Setup and Installation
Before starting the installation, please ensure you have all necessary components and tools. Refer to the parts list below and the detailed steps for each component.
Parts List

Image: Jonsbo Z20 Computer Case box contents, including the user guide and various accessories.
Screws
- x24: Motherboard/Power Supply/Graphics Card Support Bracket/SSD Bracket/HDD Bracket Screws
- x8: SSD Screws
- x5: SSD Screws
- x5: HDD Screws
- x5: SSD/HDD Silicone Washer
- x6: HDD Screws
- x3: Hex Socket Handle Screws
Spare Parts
- x1: Motherboard Post Installation Aid Sleeve
- x2: Motherboard Standoff
- x1: Glass Side Panel Screws
- x1: PCI-E Slot Cover/Radiator, Fan Bracket Screws
- x10: Cable Ties
Other Accessories
- x1: SFX To ATX Power Supply Adapter Bracket
- x1: Dual 2.5-inch SSD Mounting Bracket
- x1: 3.5-inch HDD Mounting Bracket
- x1: Rear Dust Filter
Pre-Installation Preparations
Remove Side Panel: Unscrew and remove the glass side panel to access the interior of the case.

Image: Diagram showing how to unscrew and remove the glass side panel.
Remove Internal Baffle: Locate and remove the internal baffle if necessary for component installation.
Remove ATX Power Supply Bracket: If installing an ATX power supply, the bracket may need to be removed or adjusted. Slide it down and then remove it.
Remove Radiator/Fan Bracket: If installing a top-mounted radiator or fans, remove the top bracket first.
Motherboard Installation
Install the motherboard standoffs and then secure your Mini-ITX or Micro-ATX motherboard into the case using the appropriate screws.
Connect the Front Panel I/O connectors (USB 3.2 Gen 1 Type-A, USB 3.2 Gen 2 Type-C, Headphone & Microphone) to your motherboard.
Power Supply Installation
The Z20 supports both ATX PS2 and SFX/SFX-L power supplies with various mounting options.

Image: Optional power supply installation modes, including ATX vertical, SFX side, and SFX vertical with adapter.
ATX PS2 Vertical Mounting Mode: The ATX power supply can be installed vertically. There are 4-level height lifting installation positions (P1-P4) to adapt to different hardware configurations. For air-cooled CPU heatsinks, install the PSU on P1 (supports at least 15cm length). For water-cooled CPU heatsinks, install on P2 (supports at least 14cm length).

Image: Details on ATX power supply vertical installation with 4-level height adjustment (P1-P4).
SFX Power Supply Side Mounting Mode: For SFX/SFX-L power supplies, a dedicated side mounting position is available. When installing, it is recommended to plug in the CPU power cable first.
Cooling System Support
The Z20 offers flexible cooling options for both air and water cooling.

Image: Diagram illustrating various fan installation options for top, rear, and bottom, including 120mm and 140mm fans, and 240 AIO.
- Fan Support: The top and bottom can support dual 140mm fans. A 120mm fan can be installed at the rear (air-cooled CPU heat sink status). If there is a conflict with a rear water-cooled pipe, a 92mm fan can be installed at the rear, or no fan.
- Radiator Support: The top supports up to a 240mm radiator. If using a 30mm thick radiator in P2 PSU position, the PSU needs to be secured with only 3 screws.
- Air Cooler: Compatible with high-performance air-cooled tower heat sinks up to 160mm.
Drive Bay Installation
2.5-inch SSD Installation: SSDs can be installed on the back side or bottom. For side mounting, you may need to remove the top cable management Velcro. For bottom mounting, it can accommodate 1x 14cm fan or 2x 12cm fans simultaneously.

Image: Diagram showing the installation of 2.5-inch SSDs on the back side and bottom of the case.
3.5-inch HDD Installation: HDDs can be installed in standard mounting mode (compatible with graphics card support bracket) or additional mounting mode (compatible with bottom 12cm fans, but not with graphics card support bracket).

Image: Diagram illustrating the installation of a 3.5-inch HDD at the bottom of the case, showing standard and additional installation modes.
Graphics Card Installation
The Z20 supports high-performance graphics cards up to 363mm in length.

Image: Diagram showing the maximum GPU length of 363mm and the total clearance of 89mm for GPU and bottom fan.
Standard Mounting Mode: Install the graphics card into the PCI-E slot on the motherboard.
Special Mounting Mode (for GPUs > 345mm): If a long graphics card makes installation difficult, remove the PCI-E slot support bar first. The long graphics card can then be directly inserted and installed without complex disassembly.

Image: Illustration of removable PCI-E fixed parts to optimize installation for long graphics cards.
Graphics Card Support Bracket Installation
An adjustable graphics card support bracket is included to prevent long graphics cards from sagging.

Image: Diagram showing the adjustable graphics card support bracket and its installation.
- Standard Mounting: Install the bracket to support the GPU.
- Low Support Position: For thicker graphics cards, a low support position can be selected.
- Note: Ensure the support arm does not conflict with fan blades to prevent damage to the graphics card. If there is a conflict with the GPU's appearance or size, the support bar may not be installed.
Handle Installation
The Z20 features a 2mm thick detachable and portable handle for easy transport.

Image: Exploded view showing the components and assembly of the detachable handle.
Attach the handle to the top of the case using the provided hex socket handle screws. The handle and the box are connected and fastened by screwless hooks, and after disassembly, the box has no screw holes that affect its appearance.
Finishing the Installation
Cable Management: Utilize the 22mm depth dedicated back stitching channel and the 3 cable limit Velcro straps to organize and secure internal cables, especially the front I/O and fan cables.

Image: Diagram showing the 22mm depth dedicated back stitching channel with Velcro straps for cable management.
Reinstall Side Panels: Once all components are installed and cables are managed, carefully reattach the side panels.
Operating Your Jonsbo Z20 Case
The Jonsbo Z20 is designed for efficient and quiet operation in a compact form factor. Once your system is fully assembled, connect your peripherals and power cable, then power on your PC.
- Portability: The detachable handle allows for easy transportation of your system.
- Airflow: The case features a through-type short air duct design with large square mesh holes to maintain efficient system operation by quickly discharging accumulated heat.
- Front I/O: Conveniently access USB 3.2 Gen 1 Type-A, USB 3.2 Gen 2 Type-C, and audio ports on the front panel.

Image: Illustration of the through-type short air duct system, showing air intake and exhaust for efficient cooling.

Image: Detailed view of the front I/O interface, including USB 3.2 Gen 1 Type-A (5Gbps), USB 3.2 Gen 2 Type-C (10Gbps+), and Headphone & Microphone composite audio port.
Maintenance
Regular maintenance helps prolong the life of your computer components and ensures optimal performance.
- Dust Filters: The main air inlet and outlet of the chassis are equipped with magnetic dust filters. Regularly remove and clean these filters to prevent dust buildup, which can impede airflow and cause overheating.
- General Cleaning: Use compressed air to clear dust from internal components and fans. Ensure the system is powered off and unplugged before cleaning.

Image: Diagram showing the magnetic dust filters and their placement for comprehensive coverage.
Troubleshooting
- Components Not Fitting: Double-check the compatibility table (Page 13 of the PDF manual) for maximum dimensions of GPUs, PSUs, and CPU coolers. Ensure all internal brackets and baffles are removed or adjusted as per installation instructions.
- Overheating Issues: Verify that all fans are correctly installed and spinning. Clean dust filters regularly. Ensure proper cable management to avoid obstructing airflow.
- Power Issues: Confirm the power supply is correctly installed and all power cables (especially the CPU power cable) are securely connected.
- Graphics Card Sagging: Ensure the adjustable graphics card support bracket is properly installed and adjusted to provide adequate support.
User Tips
- Unboxing Inspection: Upon receiving the case, carefully inspect all components and screws. One user reported finding hair wrapped around panel screws, so a thorough check is recommended.
- Motherboard Compatibility: The Jonsbo Z20 is confirmed to fit Micro-ATX motherboards perfectly.
- Power Supply Selection: An ATX PSU will fit, but pay close attention to the length limits (recommended ≤140mm, max 180mm) and the specific installation mode (P1-P4 levels) to ensure compatibility with other components like long GPUs or water cooling.
- Handle Strength: The carrying handle is designed to be robust for portability, allowing you to transport your system with confidence.
Warranty and Support
For warranty information, technical support, or further assistance, please contact Jonsbo customer service or refer to the official Jonsbo website. You can find the full user manual in PDF format for more detailed diagrams and instructions here.