1. Introduction and Overview
The QZT Mini Voice Recorder is a compact and versatile audio recording device, also functioning as an MP3 player. Designed for portability and ease of use, it features one-button operation, voice-activated recording, and intelligent noise reduction for clear audio capture. Its small size allows for discreet placement in various environments.



This manual provides detailed instructions for setting up, operating, and maintaining your device to ensure optimal performance.
2. Setup
2.1 Unboxing and Initial Charge
Upon receiving your QZT Mini Voice Recorder, please ensure all components are present:
- 1x Voice Recorder
- 1x Instruction Manual
- 1x Charge Cable
- 1x Headphones
- 1x Packing Box

2.2 Charging the Device
Before first use, fully charge the device. Connect the recorder to a USB power source using the provided charge cable. A full charge takes approximately 1 hour.
IMPORTANT: Always turn OFF the device before charging. Charging while the product is ON can damage the motherboard.
2.3 Setting the Time Stamp
The recorder features an advanced time synchronization setting to help you identify and manage recording files faster. Recording files are named based on the time stamp (YYYY-MM-DD-HH-MM-SS).
- Connect the recorder to your computer.
- Open the voice disk (removable drive).
- Locate and open the 'settime' folder.
- Run the 'SetTime' application. This will synchronize the recorder's time with your computer's current time.

3. Operating Instructions
3.1 Basic Recording (One-Button Operation)
The QZT Mini Voice Recorder offers simple one-button recording:
- To start recording: Slide the ON/OFF switch to the 'ON' position. The indicator light will briefly show red then blue, then turn off, indicating recording has begun.
- To save recording: Slide the ON/OFF switch to the 'OFF' position. The device will save the current recording and power off.

3.2 Voice Activated Recording (VOR)
The device supports voice-activated recording, which helps save storage space by only recording when sound is detected (above 45-50dB). It automatically pauses when there is no sound.
- To activate VOR mode: If your model has a dedicated VOR button or switch, activate it. For models like Q70, you can adjust the VOR setting via the 'PRCSET' file on the device when connected to a computer.


3.3 Playing Recordings
You can play back recordings in two ways:
3.3.1 Playing on Computer
- Connect the device to your computer using the USB cable.
- Open the voice disk (removable drive).
- Open the 'RECORD' folder.
- Choose the file you wish to play. It is recommended to use the computer's default multimedia player.
3.3.2 Playing on Recorder Device (with Headphones)
Plug the extension adapter cable and the headphones into the device. Switch the button to the 'Play/Pause' position to play recording or music files. The device supports MP3, WMA, and WAV playback.

3.4 Managing Recording Files
To manage your recording files (copy, delete, move):
- Turn off the device.
- Connect the recorder to your computer.
- Open the voice disk.
- Navigate to the 'RECORD' folder.
- You can now move, delete, or copy your recording files as needed.

3.5 Mobile Phone OTG Connection (Android Only)
The device supports OTG connection for Android mobile phones, allowing you to play and manage files directly on your phone without tedious conversion. Note: You may need to purchase an OTG adapter separately.

4. Maintenance
4.1 Smart Auto Save
When the recorder's battery is low, the system will automatically save the current recording file and then shut down to prevent data loss.

4.2 Loop Recording
To ensure continuous recording without running out of space, the device supports loop recording. When the memory is full, the oldest recording data is automatically deleted to make space for new recordings.

4.3 Intelligent Segmentation
For easier file management and search, the recorder automatically segments recording files. It stores recordings as separate files, typically every 5 hours.

4.4 General Care
The device is designed with durable materials and offers daily waterproof capabilities. However, avoid prolonged exposure to water or extreme conditions to maintain its longevity.

5. Troubleshooting
5.1 Recording Issues
- No recording or poor quality: Ensure the device is fully charged. Check the recording sensitivity (GAIN setting in PRCSET file) and bit rate (BIT setting). Make sure the microphone is not obstructed.
- Voice Activated Recording not triggering: Verify the VOR setting (in PRCSET file) is enabled and the ambient sound level is above 45-50dB.
5.2 Playback Issues
- Cannot play files on computer: Ensure the device is properly connected and recognized as a removable disk. Try playing files with your computer's default media player.
- No sound during playback with headphones: Check that headphones are securely connected and the volume is adjusted.
5.3 Device Not Responding
- Device frozen or unresponsive: Try sliding the ON/OFF switch to OFF and then back to ON. If the issue persists, connect to a computer to check for file system errors.
6. Specifications
Below are the detailed specifications for the QZT Mini Voice Recorder (Models ZD46, Q61, Q70):
| Feature | Description |
|---|---|
| Brand Name | QZT |
| Model Number | ZD46/Q61/Q70 |
| Dimensions (WxHxD) | 40*35*9.7mm (ZD46) / 71*22*28mm (Q70) |
| Product Weight | Approx. 23g (ZD46) / Approx. 64g (Q70) |
| Body Material | ABS |
| Recording Format | WAV (ADPCM 192Kbit) |
| Playback Formats | MP3, WAV, WMA |
| Microphone | Built-in high-definition microphone, External Microphone: Yes |
| Sampling Rate | 4KHz/4KHz 32KHz/48KHz/48KHz |
| Audio Bit Rate | WAV (32/64/128/192/384 Kbps) |
| Voice Activated Recording | Yes (50DB for Q70, 45dbs for ZD46/Q61) |
| Storage | Embedded memory 4GB/8GB/16GB/32GB/64GB (Model dependent) |
| Recording Capacity | 90 hours (8GB), 192 hours (16GB) |
| Battery Capacity | 250 mAh (ZD46) |
| Continuous Recording Time | Approx. 50 hours (ZD46), 20 hours (Q61), 500 hours (Q70) |
| Headphone Playback Time | Approx. 35 hours (ZD46) |
| Standby Time | Approx. 365 days (Q70) |
| Charging Time | Approx. 1 hour |
| USB Interface | MICRO-Mike 5P/DC5V-(500Mah-1000Mah) |
| Headphone Interface | MICRO-Mike Connection Control 3.5pie Stereo Jacket |
| With Speakers | Yes |
| External Memory | Yes |
| Balanced Out | No |
| Supported Systems | Windows XP & Vista/2K/ME/98 |
| Certification | CE, FCC, KC |



7. User Tips
- Optimize Memory Usage: To reduce silent recording time and make full use of memory, utilize the voice-activated recording (VOR) mode. Ensure the sound level is sufficient (above 45-50dB) for the recorder to activate.
- File Management Best Practice: Always turn off the device before connecting it to your computer or mobile phone (via OTG) to move, delete, or copy recording files. This prevents potential data corruption.
- Playback Compatibility: When playing recording files on a computer, it is recommended to use the default multimedia player for the best experience.
- Charging Safety: Strictly adhere to the charging instructions: ensure the device is OFF before connecting it to a charger to prevent damage.
8. Warranty and Support
The QZT Mini Voice Recorder is manufactured to high-quality standards and is certified with CE, FCC, and KC marks. For any technical support or warranty inquiries, please contact your retailer or the manufacturer directly.