ThermoPro TP65C Indoor Outdoor Temperature and Humidity Monitor

Introduction

The ThermoPro TP65C is a wireless indoor/outdoor thermometer and hygrometer designed to provide accurate measurements of temperature and humidity levels. Equipped with professional-grade sensors, it helps you monitor environmental conditions in your home, greenhouse, garage, wine cellar, or other locations, allowing you to make necessary adjustments for optimal comfort and preservation. Its user-friendly design includes a large backlit touchscreen for easy reading.

Package Contents

• 1 x Receiver (Main Unit)
• 1 x Remote Sensor
• 1 x User Manual

Note: Batteries (AAA) are not included and must be purchased separately.

Setup Instructions

1. Powering the Units

1. Insert 2 AAA batteries into the main receiver unit, observing polarity.
2. Insert 2 AAA batteries into the remote sensor unit, observing polarity.
3. The main unit will automatically connect to the remote sensor. If connection is not established within 3 minutes, refer to the 'Synchronization' section.

2. Sensor Placement

The ThermoPro TP65C system allows for flexible placement of both the main unit and the remote sensor to best suit your monitoring needs.

Main Unit Placement Options:

• Tabletop Stand: Utilize the integrated kickstand for convenient placement on any flat surface.
• Wall Mount: Use the hanging hole on the back to mount the unit on a wall.
• Magnetic Back: The magnetic back allows for easy attachment to metal surfaces like refrigerators.

Remote Sensor Placement:

Place the remote sensor outdoors or in any other area you wish to monitor. Ensure it is within the 200ft wireless transmission range of the main unit. For optimal accuracy and longevity, avoid direct exposure to sunlight, rain, or extreme weather conditions. The system supports up to 3 remote sensors (additional sensors sold separately) to monitor multiple locations.

Operating Instructions

1. Display Overview

The large LCD display shows indoor and outdoor temperature and humidity readings simultaneously. It also features trend arrows, MAX/MIN records, and a backlight for visibility in low light conditions.

2. Button Functions (Touch Screen)

The TP65C features touch-sensitive buttons located at the bottom of the screen:

• CH SYNC: Press to select the channel (CH1, CH2, CH3) if you have multiple remote sensors. Press and hold to synchronize the main unit with the remote sensor(s).
• Light Bulb Icon (Backlight): Tap to activate the backlight. The backlight will automatically turn off after 15 seconds to conserve battery.
• °F/°C HISTORY: Tap to switch between Celsius (°C) and Fahrenheit (°F) temperature display. Press and hold to view the MAX/MIN temperature and humidity records for the last 24 hours or all-time.
• MAX/MIN CLEAR: When viewing MAX/MIN records, tap to switch between 24-hour and all-time records. Press and hold to clear the MAX/MIN records.

3. Temperature and Humidity Trends

The display includes trend arrows next to the temperature and humidity readings. These arrows indicate whether the temperature or humidity is rising, falling, or remaining stable over time.

• Up Arrow (↑): Indicates rising temperature/humidity.
• Down Arrow (↓): Indicates falling temperature/humidity.
• Horizontal Arrow (→): Indicates stable temperature/humidity.

4. MAX/MIN Records

The unit automatically records the highest and lowest temperature and humidity readings. You can view these records for the last 24 hours or since the last reset (all-time) by pressing and holding the '°F/°C HISTORY' button.

Maintenance

1. Cleaning

Wipe the unit and sensor with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may scratch the plastic parts and corrode the electronic circuits.

2. Battery Replacement

When the low battery indicator appears on the display, replace the AAA batteries in both the main unit and the remote sensor. Ensure correct polarity when inserting new batteries.

3. Storage

If the unit is not to be used for a long period, remove the batteries to prevent leakage and damage. Store the unit in a dry, cool place away from direct sunlight.

Troubleshooting

• No Display on Main Unit: Check if batteries are inserted correctly and are not depleted. Replace if necessary.
• No Outdoor Reading or Flashing '---':
  1. Ensure the remote sensor is within range (200ft) and not blocked by significant obstacles.
  2. Press and hold the 'CH SYNC' button on the main unit to re-synchronize with the remote sensor.
  3. Check the remote sensor's batteries and replace if low.
  4. Move the main unit and/or remote sensor to a different location to avoid interference.
• Inaccurate Readings:
  1. Ensure the remote sensor is not in direct sunlight or exposed to rain, which can affect readings.
  2. Allow both units to stabilize for at least 30 minutes after setup or relocation.
  3. Compare readings with another reliable thermometer/hygrometer if available.

Specifications

User Tips

• For the most accurate outdoor readings, place the remote sensor in a shaded area that is protected from direct sunlight and precipitation.
• If using multiple remote sensors, ensure each is set to a different channel (CH1, CH2, CH3) to avoid interference.
• The large backlit touchscreen makes it easy to check readings at night, a convenient feature for last-minute checks before bed.
• Regularly check the battery indicator to ensure continuous monitoring and avoid data loss.

Product Overview Video

Warranty & Support

ThermoPro products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your TP65C device, please refer to the contact information provided on the ThermoPro official website or within the original product packaging. Keep your purchase receipt as proof of purchase for warranty claims.