ALABS Timeslip

Contents

ALABS TIMESLIP Stereo Delay Pedal User Manual

Model: TIMESLIP

1. Introduction

The ALABS TIMESLIP is a versatile stereo delay effects pedal designed for guitarists seeking a wide range of high-quality delay sounds. Featuring 9 distinct delay effects, true stereo operation, analog dry-through, and advanced control options like Tap Tempo and Multi-Expression Control, the TIMESLIP pedal offers extensive creative possibilities for recording, performance, and sound design.

ALABS TIMESLIP Delay Pedal, angled view

Figure 1: ALABS TIMESLIP Delay Pedal

2. Package Contents

Upon opening the package, please ensure all items are present and in good condition:

  • ALABS TIMESLIP Guitar Pedal
  • User Manual (this document)
  • Picks
  • Stickers

Note: The power supply is NOT included with this product.

3. Setup

3.1 Power Requirements

The ALABS TIMESLIP pedal requires a 9V DC power adapter with a center-negative polarity. A minimum current of 250mA is necessary for proper operation. Using an insufficient or improper power supply may lead to malfunction or damage to the unit.

Power Supply Note:

  • 9V DC
  • Center Negative
  • 250mA Minimum
Power requirements for ALABS TIMESLIP pedal: 9V DC, 250mA. Note: Power supply not included.

Figure 2: Power Supply Specifications

3.2 Connecting Your Pedal

The TIMESLIP pedal supports true stereo operation. Connect your instrument and amplifier(s) as follows:

  • Mono Input: Connect your guitar or previous pedal's output to the IN R (Right Input) jack.
  • Stereo Input: Connect your stereo signal source to both IN L (Left Input) and IN R (Right Input) jacks.
  • Mono Output: Connect the OUT R (Right Output) jack to your amplifier's input.
  • Stereo Output: Connect the OUT L (Left Output) jack to a second amplifier or mixer input, and the OUT R (Right Output) jack to your primary amplifier or mixer input.
ALABS TIMESLIP pedal connected with guitar cables for stereo operation

Figure 3: Pedal Connections for Stereo Operation

4. Operation

4.1 Controls Overview

The ALABS TIMESLIP pedal features several controls to shape your delay effects:

Top-down view of the ALABS TIMESLIP Delay Pedal showing all knobs and switches

Figure 4: Pedal Controls Layout

  • TIME Knob: Adjusts the delay time.
  • REPEAT Knob: Controls the number of delay repeats (feedback).
  • MIX Knob: Blends the dry (unaffected) signal with the wet (effected) signal.
  • TONE Knob: Shapes the tonal character of the delay repeats.
  • MOD Knob: Adjusts the modulation depth or rate, depending on the selected effect.
  • Effect Selector Knob: A rotary switch to choose between the 9 different delay effects.
  • TAP Switch: A toggle switch used for Tap Tempo functionality.
  • Footswitch: Engages or bypasses the effect.

4.2 Delay Effects Modes

The TIMESLIP pedal offers 9 high-quality delay effects:

Detailed view of the effect selector knob with labels for Digital, Analog, Reverse, Warp, Granule, Octave, Sweeper, Swell, Tape

Figure 5: Effect Selector Knob

  1. Digital: Clean, pristine delay repeats.
  2. Analog: Warm, decaying repeats characteristic of analog delays.
  3. Reverse: Plays delay repeats backward.
  4. Warp: Unique, pitch-shifting or time-stretching delay.
  5. Granule: Granular synthesis-based delay for textural effects.
  6. Octave: Adds octave-shifted repeats.
  7. Sweeper: Delay with a sweeping filter effect.
  8. Swell: Creates a volume swell effect on the repeats.
  9. Tape: Emulates the characteristics of vintage tape echo units, including wow and flutter.

4.3 Stereo Modes

All effect types can be selected in two true stereo modes:

Diagram showing the pedal with DSP chip and icons for Ping Pong Stereo Mode and True Stereo Mode

Figure 6: Stereo Modes Diagram

  • True Stereo Mode: Maintains distinct left and right channels for a wide, immersive soundstage.
  • Ping Pong Stereo Mode: Alternates delay repeats between the left and right channels, creating a dynamic stereo spread.

4.4 Tap Tempo

The built-in Tap Tempo feature allows you to set the delay time by tapping the footswitch. The pedal supports two rhythm modes:

Image highlighting '2 Tap Tempo Rhythms' with the pedal

Figure 7: Tap Tempo Functionality

  • 1/4 Note: Each tap sets a quarter note delay.
  • 3/8 Note: Each tap sets a dotted eighth note delay.

To activate Tap Tempo, press and hold the footswitch until the LED blinks, then tap the footswitch at your desired tempo. The TAP toggle switch may be used to select the rhythm mode.

4.5 Multi-Expression Control (∞ Explore Mode)

The ∞ (Infinity) Explore Mode allows for dynamic manipulation of delay parameters. It can memorize the variation curves of the TIME, REPEAT, MIX, and MOD parameters within a 5-second timeframe for playback, offering unique expressive control over your sound.

Foot pressing the footswitch of the pedal, illustrating Multi-Expression Control (Explore Mode)

Figure 8: Multi-Expression Control in action

4.6 Analog Dry-Through & Bypass

The TIMESLIP pedal features an independent analog dry pass buffer amplifier circuit to retain unaffected, zero-delay, pure dry signals. This ensures your original guitar tone remains pristine.

Hand adjusting the TAP switch on the pedal, illustrating Analog Dry Through

Figure 9: Analog Dry Through

The pedal offers switchable true bypass and buffer bypass options. True bypass ensures no signal degradation when the effect is off, while buffer bypass provides a strong, consistent signal over long cable runs.

5. Features

Key features of the ALABS TIMESLIP Delay Pedal include:

  • Exclusive WAVE (Wizard Audio Virtual Engine) audio engine for superior sound quality.
  • True Stereo Operation & Analog Dry-through for pristine signal integrity and immersive soundscapes.
  • 9 High-Quality Delay Effects: Digital, Analog, Reverse, Warp, Granule, Octave, Sweeper, Swell, and Tape.
  • Regular & ∞ (Infinity) Explore Mode, offering dynamic parameter control.
  • 2 Selectable Stereo Modes: True Stereo and Ping Pong.
  • 2 Tap Tempo Rhythms: 1/4 and 3/8 notes.
  • Switchable True Bypass & Buffer Bypass.
  • Excellent craftsmanship and stomp-friendly design.

6. Specifications

AttributeValue
Brand NameALABS
Model NumberTimeslip
TypeEffects (Delay)
Audio Output EffectsDelay
Control TypePedal
Hardware InterfaceAUX
Is Batteries IncludedNo
Power Supply9V DC (Center Negative), 250mA minimum
Product Length18 cm
Product Width10 cm
Product Height10 cm
Product Weight0.4 kg

7. Maintenance

To ensure the longevity and optimal performance of your ALABS TIMESLIP pedal, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners, solvents, or excessive moisture.
  • Storage: Store the pedal in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
  • Protection: When not in use, disconnect the power supply and instrument cables. If transporting, use a padded case to prevent physical damage.
  • Power: Always use the specified 9V DC center-negative power supply. Incorrect power can damage the unit.

8. Troubleshooting

If you encounter issues with your ALABS TIMESLIP pedal, consider the following common troubleshooting steps:

  • No Sound/Weak Signal:
    • Check all cable connections (instrument, amplifier, power). Ensure they are securely plugged in.
    • Verify the power supply meets the 9V DC center-negative, 250mA minimum requirements.
    • Ensure the pedal is engaged (footswitch LED illuminated).
    • Test with different cables, power supply, or instrument to isolate the problem.
  • Unwanted Noise/Hum:
    • Ensure you are using a regulated power supply designed for guitar pedals.
    • Try a different power outlet.
    • Check for ground loops in your signal chain.
    • Move the pedal away from other electronic devices that might cause interference.
  • Effect Not Working as Expected:
    • Review the operation section to ensure controls are set correctly for the desired effect.
    • Check the Effect Selector knob to confirm the correct delay mode is chosen.
    • Adjust TIME, REPEAT, MIX, TONE, and MOD knobs to hear their impact.

9. User Tips

Maximize your experience with the ALABS TIMESLIP pedal with these tips:

  • Experiment with Stereo: If you have two amplifiers or a stereo effects loop, try connecting the pedal in stereo to fully appreciate the True Stereo and Ping Pong modes.
  • Tap Tempo Practice: Practice using the Tap Tempo feature to seamlessly match your delay repeats to the song's tempo during live performance.
  • Explore ∞ Mode: Don't be afraid to experiment with the Multi-Expression Control (∞ Explore Mode) by manipulating knobs while recording a 5-second phrase. This can lead to unique and evolving sound textures.
  • Mix Knob is Key: The MIX knob is crucial for balancing your dry signal with the delay. Start with a lower mix and gradually increase to find the sweet spot for your sound.
  • Power Supply Quality: Invest in a high-quality, isolated power supply to minimize noise and ensure stable operation, especially with digital effects pedals.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official ALABS website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.