1. Introduction
The MESTEK WM710A is a professional digital non-contact moisture meter designed for quick and accurate measurement of moisture content in various materials, primarily wood. Its non-destructive spherical probe allows for easy testing without damaging surfaces. Equipped with a high-definition color LCD screen and multiple functions like data retention, MAX/MIN recording, and an alarm, it provides a convenient and reliable solution for moisture detection in woodworking, construction, and home inspection.

2. Key Features
- Accurate Measurement: Provides reliable data for wood humidity.
- Non-Destructive Testing: Utilizes a spherical probe for induction testing without damaging the material surface.
- Self-Calibration: Ensures consistent accuracy.
- Data Retention (HOLD): Freezes the current reading on the display.
- MAX/MIN Record: Automatically detects and records the maximum and minimum moisture values within a test range.
- Alarm Function: Alerts the user when moisture levels exceed predefined RISK or WET limits.
- Automatic Shutdown: Powers off after 30 minutes of inactivity to conserve battery life.
- HD Color LCD Screen: Clear and easy-to-read display of measurement results.
- Low Power Reminder: Indicates when batteries need replacement.
- Numerical Display: Direct display of humidity values for quick understanding.
3. Product Overview and Components
Familiarize yourself with the parts of your MESTEK WM710A moisture meter:

- Non-destructive humidity sensor: Spherical probe for contact-free measurement.
- Analog display: Bar graph indicator for moisture levels.
- Numeric display: Large digital readout of moisture value.
- Color screen: High-definition display.
- MAX/MIN maximum value: Displays the highest recorded moisture value.
- Power button: Turns the device on/off.
- MAX/MIN button: Toggles between maximum and minimum recorded values.
- MEAS button: Used for calibration and data hold.
- SET key: For adjusting settings and alarm limits.
- (▼/▲) Numeric adjustment plus and minus key: For adjusting numerical values in settings.
4. Setup
4.1 Battery Installation
The MESTEK WM710A requires 3 AAA 1.5V batteries (not included). To install:
- Locate the battery compartment on the back of the device.
- Use the provided screwdriver to open the battery compartment cover.
- Insert 3 AAA batteries, ensuring correct polarity (+/-).
- Replace the battery compartment cover and secure it with the screw.
4.2 Powering On/Off
Press the Power button (
) to turn the device on. Press and hold the Power button to turn it off. The device will automatically shut down after 30 minutes of inactivity.

5. Operating Instructions
5.1 Basic Measurement
The WM710A uses a non-destructive spherical probe to measure moisture. The testing area is the spherical probe itself, and the measuring depth is 20-40mm.
- Turn on the device.
- Place the spherical probe firmly against the surface of the material you wish to measure.
- Read the moisture value displayed on the color LCD screen. The device provides both an analog bar graph and a precise numerical display.
5.2 MAX/MIN Record Function
This function helps locate the wettest and driest areas by automatically detecting and recording the maximum and minimum moisture values within a test range.
- While measuring, press the MAX/MIN button.
- The display will show 'MAX' or 'MIN' along with the corresponding value.
- Move the probe across the surface; the device will update the MAX/MIN values as it finds higher or lower readings.

5.3 Data Retention (HOLD)
To hold a measurement on the screen:
- Take a measurement.
- Press the MEAS button briefly. The 'HOLD' indicator will appear on the screen, and the reading will be frozen.
- Press the MEAS button again to release the hold and resume live measurement.
5.4 Alarm Function
The device features a dual alarm function to indicate moisture levels:
- RISK Limit Value: 0-50. If the measurement falls within this range, it indicates a potential risk of moisture.
- WET Limit Value: 51-100. If the measurement falls within this range, it indicates a high moisture content.
The alarm will sound or provide a visual indication when these limits are exceeded. You can adjust these limits using the SET key and the numeric adjustment keys.
5.5 Non-Destructive vs. Pin-Type Moisture Meters
The MESTEK WM710A offers significant advantages over traditional pin-type moisture meters:

6. Measurement Applications
The MESTEK WM710A is versatile and can be used to measure moisture in various materials:
- Wood materials: Ideal for checking lumber, flooring, furniture, and other wood products.
- Powder/Brick wall: Suitable for assessing moisture in masonry and plaster.
- Concrete: Can be used to check moisture levels in concrete slabs and structures.
- Ceiling: Useful for detecting hidden moisture in ceilings, often indicative of leaks.




7. Specifications
| Parameter | Value |
|---|---|
| Product Name | Non-destructive moisture meter |
| Model Number | WM710A |
| Testing Area | Spherical probe |
| Measurement Range | 0-100 |
| Measured Depth | 20-40mm |
| Range of RISK Limit Value | 0-50 |
| Range of WET Limit Value | 51-100 |
| Automatic Shut-down | 30 minutes |
| Display Type | Color screen (HD LCD) |
| Battery | 3 x 1.5V AAA (not included) |
| Operation Current | About 30mA |
| Operation Temperature | 0-40℃ |
| Operation Humidity | 0%-70% RH |
| Storage Environment | -10-50℃ (5%-95% RH) |
| Dimension | 225 x 63 x 32mm |
| Weight | 190g (excluding batteries) |
8. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the low power reminder appears on the screen to ensure accurate readings. Remove batteries if the device will not be used for an extended period.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided storage bag for protection.
- Calibration: The device features self-calibration. If you suspect inaccuracies, ensure the probe is clean and the device is at a stable temperature before re-testing.
9. Troubleshooting
- Device does not power on: Check battery installation and ensure batteries are not depleted. Replace if necessary.
- Inaccurate readings: Ensure the probe is clean and making good contact with the surface. Verify that the device is operating within its specified temperature and humidity ranges. Perform self-calibration if available.
- Display issues: If the screen is dim or flickering, replace the batteries. If the issue persists, contact support.
- Alarm not functioning: Check the alarm settings using the SET key to ensure limits are configured correctly.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.