1. Introduction
Thank you for purchasing the QYT KT8R Two Way Radio. This device is designed for reliable and comfortable wireless communication, featuring quad-band operation and a clear screen display. This manual provides essential information for the proper installation, operation, and maintenance of your radio.
The QYT KT8R utilizes updated technology to ensure high-quality performance and user satisfaction. Please read this manual thoroughly before use to ensure safe and effective operation.

Figure 1: QYT KT8R Two Way Radio Front View
Video 1: Overview of the QYT KT8R radio, showing its various angles and components.
2. Safety Precautions
To ensure safe operation and prolong the life of your device, please observe the following precautions:
- Keep the intercom and its accessories out of reach of children.
- Do not attempt to disassemble the intercom. Disassembly by non-professionals can damage the internal structure and void the warranty.
- Use only the matched battery set and power charger provided by the manufacturer to avoid damage.
- Always use the matched antenna. Operating without an antenna or with an unmatched antenna can lead to short-range communication and potential damage.
- Avoid exposing the intercom to direct sunlight for extended periods or placing it in high-temperature environments.
- Do not expose the intercom to dust or damp environments.
- Do not clean the intercom with strong chemicals, cleaning agents, or strong detergents.
- Never transmit without the antenna installed.
- If you detect any unusual smells or malfunctions, immediately turn off the intercom, remove the battery, and contact your distributor for assistance.
3. Package Contents
Before using your QYT KT8R radio, please inspect the package to ensure all items are present and undamaged. If any items are missing or damaged, contact your distributor immediately.

Figure 2: Included Accessories
Included Items:
- 1 x QYT KT-8R Radio
- 1 x Quad band antenna
- 1 x Li-ion Battery 7.4V 2000mAh
- 1 x Charger with power supply
- 1 x Strap
- 1 x Belt clip
- 1 x User manual (this document)
4. Setup and Installation
4.1. Install/Remove Battery
- Installation: Turn off the walkie-talkie. Align the positioning bolt on the top of the battery with the positioning hole on the top of the aluminum plate on the radio. Push the battery upwards until you hear a clicking sound, indicating it is successfully installed.
- Removal: Turn off the walkie-talkie. Gently press the buckle and push the battery downwards to remove it.

Figure 3: Battery Installation/Removal
4.2. Install/Remove Belt Clip
Align the screw hole on the belt clip with the screw hole on the aluminum plate of the rear housing. Use the provided screw tools to lock it in place.
4.3. Install/Remove Antenna
Insert the threaded end of the antenna into the large screw hole at the top of the walkie-talkie. Turn clockwise until it is tightened. Ensure the antenna is securely attached before operation.
4.4. Install Earphone (Optional)
Open the cover from the top of the earphone jack. Insert the earphone into the corresponding earphone hole. The earphone will then function normally.
4.5. Power Charging
For new or long-unused intercoms, it is recommended to charge and discharge the battery 2-3 times to achieve optimal performance. When the power is low, charge the battery or replace it.
Pedestal Charger:
Insert the battery (or the intercom with the battery installed) into the pedestal charger. Ensure a good connection; the red light will turn on, indicating charging has started. When the indicator light turns green, the battery is fully charged. A full charge typically takes about 5 hours. If the battery voltage is lower, the charging time will be longer.
Charging Precautions:
- Do not short-circuit the battery terminals or dispose of the battery in fire.
- When charging the battery while it's in the intercom, ensure the intercom is turned off for a full charge.
- Do not leave a fully charged battery on the charger for continuous charging, as this can shorten its lifespan.
- Ideally, charge the battery at temperatures below 25°C. Charging below 10°C can damage the battery due to electrolyte leakage.
- Charging above 35°C may result in reduced battery performance.
5. Operation
5.1. Intercom Parts Overview
Familiarize yourself with the main components of your QYT KT8R radio:
- Antenna: For transmitting and receiving signals.
- Flashlight: For illumination.
- ON/OFF Voice Switch Button: Controls voice functions.
- LCD Display: Shows frequency, channel, and status icons.
- UP & DOWN Buttons: For navigation and adjustments.
- Microphone: For voice input.
- PTT Button (Push-to-Talk): To initiate transmission.
- Monitor Button: To monitor channels.
- Transceiver Indicator: Indicates transmission/reception status.
- Speaker: For audio output.
- Number Buttons (Keypad): For frequency input and menu navigation.
- Keyboard Lock: To prevent accidental key presses.
- Earphone Jack: For connecting an external earphone.
- Programmer Hole: For connecting to a computer for programming.

Figure 4: QYT KT8R Radio in Hand
5.2. LCD Display Icons
The LCD display provides visual feedback on the radio's status. Key icons include:
- Keyboard Lock Revelation Sign: Indicates if the keyboard is locked.
- VOX: Voice-activated transmission function is active.
- A/B: Current channel or transmit channel voice function open.
- +/-: Manual different frequency direction indication.
- FM: FM Radio is on.
- High Power Indicator: Current channel or transmit channel set on high power.
- Signal Strength/Power Indication: Shows strength of receiving signal and power level.
- R: Reverse frequency switching.
- S: Power save function.
- Battery Voltage Indication: Displays current battery level.
- CTC: Current channel or transmit channel select mode sub audio channel.
- Frequency Display: Current frequency indication (e.g., 435.025 MHz).
5.3. Button Functions and Menu Navigation
The radio's functions are accessed via the keypad and menu system. Long press the [MENU] button to enter the first-class menu. Use UP/DOWN buttons to navigate and [MENU] to confirm selections.
Keypad Shortcuts:
| Button | Short Press | Long Press | [MENU] + Button |
|---|---|---|---|
| MENU | Keyboard | Keyboard | Keyboard |
| EXIT | 1. Exit or return to previous menu 2. Delete number when choosing frequency/channel | Operation invalid | Return and wait |
| Side key 1 | Invalid | Monitor | Operation invalid |
| Side key 2 | Flashlight on | Operation invalid | Operation invalid |
| 0 STOR | Operation invalid | Save memory channel | |
| 1 SQL | Operation invalid | Squelch level setting | |
| 2 STEP | Operation invalid | Frequency step setting | |
| 3 HM | Operation invalid | High and low power setting | |
| 4 TONE | Input the frequency or signal channel you need | Operation invalid | Select signaling type |
| 5 CALL | Operation invalid | Transmitting signal | |
| 6 REV | Operation invalid | Receiving signal | |
| 7 | Receiving and transmitting frequency exchange during up relay | ||
| 8 SCAN | Operation invalid | Start scanning function | |
| 9 FM | Operation invalid | Start radio function | |
| * ROG | Select finish voice | ||
| A/B | A/B signal selection | VHF/UHF frequency exchange (VFO frequency mode) | |
| UP/DOWN | Increase/reduce frequency or signal | Increase or reduce frequency fast | Operation invalid |
| V/M | Select work mode | Operation invalid | Operation invalid |
| # | Start keyboard lock | Operation invalid |
5.4. Detailed Menu Instructions
The radio offers a comprehensive menu system for configuring various parameters. Access the menu by long-pressing the [MENU] button.
RF Group Settings:
- Squelch Level: Adjusts the threshold for receiving signals. Levels 0-9. Level 0 keeps squelch open, level 9 is highest. Higher levels reduce noise but may miss weak signals.
- Power Setting: Select transmission power (HIGH/MIDDLE/LOW).
- Companding: Enables or disables voice companding for improved audio quality.
- Language Encryption: Sets encryption for disyllabic encryption (Open/Close).
- Bandwidth Selection: Choose between wide or narrow band.
- Busy Channel Lock-Out (BCLO): Prevents transmission on an occupied channel. Options: Open, Close, Signaling, Carrier.
- Transmit Timeout (TOT): Limits continuous transmission time (30-270 seconds, 9 levels).
- Timeout Indication: Provides a warning before TOT activates (e.g., 5 seconds before timeout).
- Frequency Difference Direction: Sets the offset direction for repeater operation (OFF, +, -).
- Different Frequency: Allows setting a specific frequency difference.
- Transmit Frequency: Sets the UHF-VHF frequency difference.
- Stepping: Configures frequency step size (2.5K, 5K, 6.25K, 10K, 12.5K, 25K, 20K, 30K, 50K).
CTCSS (Continuous Tone Controlled Squelch System) Settings:
- Transmit/Receive CTCSS: Set specific CTCSS/DCS codes for transmission and reception. Options include OFF, CTC, DCS, IDCS. Codes can be edited directly.
- Special DCS: Configure special DCS codes.
- CTCSS Scan: Scans for CTCSS/DCS codes.
Scan Group Settings:
- Recovery Scanning: Defines how the radio behaves after scanning a signal (Carrier, Time, Search).
- Carrier: Stops scanning when a signal is detected; resumes 3 seconds after signal disappears.
- Time: Stops scanning when a signal is detected; resumes after a set time if no operation.
- Searching: Stops scanning when a signal is detected.
- Priority Scan Channel: Designate a channel as a priority for scanning.
- Add or Delete Scanning: Manage channels in the scanning list (available in channel or memory mode).
General Settings:
- Work Mode: Select between Signal Channel, Memory Mode, or Frequency Mode.
- Signal Channel: Displays signal number if at least one channel is saved.
- Memory Mode: Displays frequency and channel number for saved channels.
- Frequency Mode: Displays only frequency; allows direct frequency input.
- Battery Save Power: Reduces power consumption when not transmitting. Offers five levels of power saving.
- A/B Channel Switch: Controls automatic switching between A/B channels upon signal reception (Open, Auto, Close).
- Voice Control Levels (VOX): Adjusts sensitivity for voice-activated transmission (Open, Close, levels 0-9). Higher levels require louder voice. Not active during scanning or radio mode.
- Voice Control Delay: Sets the residence time after voice transmission/reception ends (0.3s, 0.5s, 1.0s, etc.). Default is 1.0s.
- FM Switch Automatically: Determines if the radio automatically switches to work mode when a signal is received in FM radio mode.
- Keyboard Lock: Manual or automatic keyboard lock. Manual lock: long press [#] to lock/unlock. Automatic lock: locks after 30 seconds of inactivity.
- Backlight: Adjusts backlight duration (5s, 10s, 15s, 20s, Close).
- Language: Select display language (Chinese, English).
- Automatic Shutdown: Sets a timer for the intercom to turn off after inactivity (10 min, 30 min, 1 hr, 2 hr, ... 12 hr).
- Recover Default Setting: Resets parameters.
- Delete Frequency: Resets all function parameters to default.
- Complete Deletion: Resets all function and channel parameters to default.
Signal Path Settings:
- Signal Path Deletion: Deletes selected signaling channels (in signal channel or memory mode).
- Signal Path Name Edition: Edit names for up to 6 signaling channels (A-Z, 0-9, and symbols).
- Signal Path Name Display: Toggles display of signal path names (Open/Close).
6. Care and Maintenance
Proper care and maintenance will ensure the longevity and optimal performance of your QYT KT8R radio.
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Avoid using strong chemicals, cleaning agents, or abrasive detergents, as these can damage the casing and internal components.
- Storage: Store the radio in a cool, dry place away from direct sunlight, extreme temperatures, dust, and damp environments.
- Battery Care: Follow the charging precautions outlined in Section 4.5 to maximize battery lifespan. Avoid overcharging or charging in extreme temperatures.
- Antenna: Always ensure the antenna is properly installed before transmitting. Operating without an antenna can damage the radio's transmitter.
- Disassembly: Do not attempt to open or repair the radio yourself. Unauthorized disassembly will void the warranty and may cause further damage.
- Accessories: Use only original or approved accessories to prevent damage and ensure compatibility.
7. Troubleshooting
If you encounter issues with your QYT KT8R radio, try the following basic troubleshooting steps:
- No Power:
- Check if the battery is properly installed and charged.
- Ensure the power button is pressed correctly.
- Cannot Transmit or Receive:
- Verify the antenna is securely attached.
- Check if the battery has sufficient charge.
- Ensure you are on the correct frequency/channel.
- Adjust the squelch level (SQL) if receiving weak signals.
- Check if Busy Channel Lock-Out (BCLO) is active on an occupied channel.
- Ensure VOX function is not interfering if you are trying to transmit manually.
- Poor Audio Quality:
- Check microphone and speaker for obstructions.
- Ensure companding is set appropriately in the menu.
- Verify the signal strength; weak signals can result in poor audio.
- Keyboard Unresponsive:
- Check if the keyboard lock is active. Long press the '#' button to unlock.
If the problem persists after attempting these steps, please refer to the full user manual PDF or contact customer support.
8. Specifications
General Specifications:
| Frequency Range | VHF: 136-174MHz, 220-260MHz UHF: 350-390MHz, 400-480MHz |
| Channel Capacity | 200 Channels |
| Frequency Stability | ±2.5ppm |
| Channel Step | 2.5/5/6.2/10/12.5/25KHz |
| Working Voltage | 7.4V DC±15% (Charging Lithium Battery) |
| Squelch Way | CARRIER / CTCSS / DCS / 5Tone / 2Tone / DTMF |
| Antenna Impedance | 50Ω |
| Operating Temperature | -20°C ~ +60°C |
| Dimensions (W*H*D) | 128*62*35mm (without antenna) |
| Weight | 230g |
| Battery Capacity | 2000mAh |
| Display | Yes |
| Waterproof / Water-Resistant | No |
| Maximum Range | 3km-5km |
| Material | Plastic |
| Certification | CE, FCC, RoHS |
Receiver Specifications:
| Parameter | Wide Band | Narrow Band |
|---|---|---|
| Sensitivity | ≤0.25μV | ≤0.35μV |
| Channel Choice | ≥70dB | ≥60dB |
| Intermodulation | ≥65dB | ≥60dB |
| Spurious Rejection | ≥70dB | ≥70dB |
| Audio Response | +1~-3dB (0.3~3KHz) | +1~-3dB (0.3~2.55KHz) |
| Signal to Noise Ratio | ≥45dB | ≥40dB |
| Audio Distortion | ≤5% | |
| Audio Output Power | ≥1W@10% | |
Transmitter Specifications:
| Parameter | Wide Band | Narrow Band |
|---|---|---|
| Output Power | 5W-10W | |
| Modulation Mode | 16KΦF3E | 11KΦF3E |
| Channel Power | ≥70dB | ≥60dB |
| Signal Noise Ratio | ≥40dB | ≥36dB |
| Parasitic Harmonic | ≥60dB | ≥60dB |
| Audio Response | +1~-3dB (0.3~3KHz) | +1~-3dB (0.3~2.55KHz) |
| Audio Distortion | ≤5% | |
Note: Specifications are subject to change due to updated technology without prior notice.
9. Warranty and Support
Warranty Information:
The QYT KT8R Two Way Radio comes with a warranty to cover manufacturing defects. Please retain your purchase receipt and warranty card for service.
- The warranty card must be saved by the user and should not be lost.
- The card is valid only after the distributor has stamped and signed it.
- Ensure the warranty card's serial number matches the purchased machine; otherwise, the card is invalid.
- The intercom unit has a 12-month warranty for normal use.
- The battery and charger have a 6-month warranty.
- Accessories such as the antenna, belt clip, car charger, and borrowing appliances are considered consumables and are not covered by warranty.
Support:
For technical support, warranty claims, or further assistance, please contact your original place of purchase or the local special maintenance site provided by the company.
A detailed user manual in PDF format is available for download: QYT KT8R User Manual (PDF)
10. User Tips
Here are some helpful tips for getting the most out of your QYT KT8R Two Way Radio:
- Antenna Connection: Always ensure your antenna is securely fastened before powering on or transmitting to prevent damage to the radio's internal components.
- Battery Optimization: For new batteries, perform 2-3 full charge-discharge cycles to condition the battery and maximize its capacity. Avoid charging in extreme temperatures.
- Frequency Management: Take advantage of the 200 channel capacity to organize your most used frequencies. Use the "Save memory channel" function (Long press 0 STOR) to quickly access them.
- Squelch Adjustment: If you're in a noisy environment, increase the squelch level to filter out background noise. If you're having trouble hearing weak signals, lower the squelch level.
- Keyboard Lock: Utilize the keyboard lock feature (long press #) to prevent accidental changes to settings during active use or when carrying the radio.
- Power Saving: Enable the "Battery save power" function in the settings to extend the operational time of your radio, especially during periods of inactivity.