1. Product Overview
Thank you for choosing the new generation of MPPT controller produced by our company. This product is developed according to the latest technology, representing the latest level of photovoltaic technology development, and has many excellent performances.
This controller is used in solar off-grid power generation systems to automatically adjust battery charging and discharging. It has an advanced tracking algorithm to obtain the maximum power of the solar cell components and charge the battery; at the same time, its low voltage disconnect (LVD) function can prevent the battery from over-discharging and causing damage.
The battery charging process of the MPPT controller is optimized to extend battery life and improve system performance. Its comprehensive self-test function and electronic protection function can avoid damage caused by installation errors and system failures. Although the controller is easy to operate and use, to enable you to better use all the functions of the controller and improve your photovoltaic system, please read the instructions in this manual carefully.
Front view of the MPPT Solar Charge Controller, showing the LCD display and control buttons.
2. Features
- Innovative maximum power point tracking technology (MPPT) with tracking efficiency no less than 99.5%, and conversion efficiency up to 97%.
- Quickly scans the entire I-V curve to efficiently track the maximum power point.
- Supports multiple battery types: Lead-acid (sealed, colloidal, open type) and Lithium battery series (LifePo4, Li-ion, and user-defined).
- Automatic identification for 12V/24V/36V/48V/60V/72V/84V/96V systems.
- Comprehensive protection functions: overcharge, overdischarge, overload, short circuit, reverse connection, over-voltage, and over-temperature protection.
- LCD display with touch buttons for dynamic display of operation data and working status (generating capacity, photovoltaic voltage, battery voltage, charging current, power, operation status).
- RS485 communication interface for multi-machine communication and viewing operating parameters. (Note: WIFI module is sold separately).
- Dual USB 5V charging ports.
- Maximum PV input voltage up to 230VDC (some models up to 480VDC).
- Backlight display for improved visibility.
Diagram illustrating the various protection features and key components like automatic fan cooling and HD LCD screen.
3. Safety Precautions
Please read all safety instructions carefully before installation and operation to prevent personal injury or damage to the controller and connected equipment.
- Ensure proper ventilation around the controller to prevent overheating.
- Always connect the battery first, then the DC load, and finally the solar panels. Disconnect in reverse order.
- Verify correct polarity for all connections to avoid damage.
- Do not attempt to repair or modify the controller yourself. Refer to qualified personnel for service.
- Keep the controller away from water, flammable materials, and corrosive substances.
- Ensure all wiring is securely fastened and insulated.
4. Installation and Connection
4.1. Installation Safety Distance
Observe the following safety clearances to ensure adequate heat dissipation and prevent interference with other equipment:
- Left and Right: Minimum 20cm clearance
- Above and Below: Minimum 30cm clearance
Diagram showing recommended clearances for controller installation.
4.2. Line Connection Method
Follow the correct wiring sequence to ensure safe and proper operation:
- Connect the Battery: First, connect the positive (+) and negative (-) poles of the battery to the controller.
- Connect the DC Load: Next, connect the positive (+) and negative (-) poles of the DC load to the controller.
- Connect the Solar Panel: Finally, connect the positive (+) and negative (-) poles of the solar panel to the controller.
Disconnection Sequence: To disconnect the system, follow the reverse order: first disconnect the solar panel, then the DC load, and finally the battery.
Detailed connection diagram for solar panel, battery, DC load, and optional inverter.
Labeled terminal connections on the controller: 1. Temperature sensor interface, 2. Solar panels, 3. Battery, 4. DC load, 5. RS485 interface, 6. Terminal box cover plate, 7. LCD display, 8. Cooling hole.
5. Operating Instructions
5.1. LCD Main Interface Description
The LCD display provides real-time information about the system's status. The main interface typically shows:
- PV: Solar panel status and voltage.
- CHARGE: Charging status and current.
- LOAD: DC load status.
- ALARM: System warnings or errors.
- MPPT: Indicates MPPT tracking is active.
- Battery Voltage: Current battery voltage.
- Controller Generation Wattage: Power being generated by the controller.
- Charging Current: Current flowing into the battery.
- Total Power Generation: Cumulative energy generated.
Detailed view of the LCD display with labeled indicators for DC Voltage, Controller Generation Wattage, Charging Current, Battery Voltage, and Total Power Generation.
5.2. Parameter Setting Steps
To access and modify settings, use the control buttons on the front panel:
- SET/Back: Press to enter the main menu or go back to the previous screen.
- UP (+): Navigate up through menu options or increase values.
- DOWN (-): Navigate down through menu options or decrease values.
- CONFIRM (3s): Press and hold for 3 seconds to confirm a selection or enter a submenu.
Video demonstrating the LCD display operation and parameter setting process.
General Menu Navigation:
- From the default main interface, press SET to enter the main menu.
- Use UP or DOWN to view different submenus (e.g., Battery, Charging, DC Output, Time, Reset, Language).
- Press CONFIRM (3s) to select a menu item and enter its settings.
Specific Settings:
- Language Setting: Choose between Chinese and English.
- DC Output Setting: Turn the DC load output ON or OFF.
- Battery Type Setting: Select from pre-defined types (Lead Acid, Gel, LifePo4, Li-ion) or a user-defined profile. After selection, confirm and set the required voltage.
- Charging Current Setting: Adjust the charging current. Refer to the "Parameter Table" in the Specifications section for product-specific ranges.
- Restore Factory Settings: If needed, you can clear all records and restore the controller to its default settings.
Visual guide for navigating the menu and adjusting parameters like language, DC output, and battery type.
6. Maintenance
To ensure optimal performance and longevity of your MPPT Solar Charge Controller, regular maintenance is recommended:
- Cleaning: Periodically clean the controller's exterior with a dry cloth to remove dust and debris. Ensure cooling holes are unobstructed.
- Connections: Regularly check all wiring connections for tightness and corrosion. Loose connections can lead to power loss or overheating.
- Battery Health: Monitor battery voltage and performance. Ensure the battery type setting in the controller matches your battery to optimize charging and extend battery life.
- Environment: Ensure the installation environment remains within the specified operating temperature range (-20°C to 40°C) and humidity levels (0-90% RH, non-condensation).
- Firmware Updates: Check the manufacturer's website for any available firmware updates that may improve performance or add new features.
7. Troubleshooting
If you encounter issues with your MPPT Solar Charge Controller, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No display on LCD | No power from battery or solar panel; loose connections. | Check battery and solar panel connections. Ensure battery voltage is above minimum operating voltage. |
| Battery not charging | Solar panel not connected; insufficient sunlight; incorrect battery type setting; faulty solar panel. | Verify solar panel connection and sunlight. Check battery type setting. Test solar panel output. |
| DC Load not working | DC output turned off in settings; overloaded DC output; faulty load. | Check DC Output setting (ensure it's ON). Reduce load or check for short circuit. Test the DC load device. |
| Alarm indicator on | Over-voltage, over-current, over-temperature, or other protection triggered. | Check system parameters on LCD for specific error code. Address the underlying issue (e.g., reduce load, check wiring, ensure ventilation). |
If the problem persists after attempting these solutions, please contact customer support.
8. Specifications
The following table provides detailed technical parameters for the MPPT Solar Charge Controller:
| Parameter | Description / Value |
|---|---|
| Brand Name | HXCONTROLLER |
| Model Number | 230VDC 48V 60V 72V 96V MPPT Solar Panel Controller |
| Is Smart Device | Yes |
| Application | Charger Controller, Voltage Controller, Solar System Controller |
| Rated Charging Current | 30A / 40A / 50A / 60A / 80A / 100A (model dependent) |
| Battery Voltage | 12V / 24V / 48V / 60V / 72V / 96V (Auto-identification) |
| Charging Mode | MPPT automatic maximum power tracking |
| Charging Method | MPPT tracks maximum power, fast charge, balanced charge, and float charge. |
| Overall Efficiency | 96.5% ~ 99% |
| Max PV Input Voltage | 0 - 230V (some models up to 480V) |
| DC Continuous Output | 25A / 60A / 100A (model dependent) |
| Working Environment Temperature | -20°C ~ 40°C |
| IP Protection Level | IP21 |
| Altitude | 0 ~ 3000m |
| Product Size (30A/40A) | 202mm * 215mm * 100mm |
| Product Size (50A/60A/80A/100A) | 218mm * 265mm * 100mm |
For a complete list of parameters and specific model variations, please refer to the official user manual PDF: View User Manual (PDF)
9. User Tips
- The controller is generally easy to install, making it suitable for DIY solar projects.
- It supports a wide range of PV input voltages, up to 230VDC, offering flexibility in solar panel configuration.
- The high charging efficiency (up to 99%) ensures optimal power transfer from solar panels to batteries.
- Consider purchasing the RS485 WIFI module separately if remote monitoring and control are desired.
- Ensure the battery type is correctly set in the controller's menu to match your battery for proper charging and extended battery life.
10. Frequently Asked Questions (FAQ)
- Q: What are the main functions of this product?
- A: It functions as a solar panel controller, charger controller, and voltage controller.
- Q: In what scenarios can this controller be used?
- A: It is suitable for solar systems and can be used in various applications requiring charge control and voltage regulation.
- Q: What is the maximum voltage from solar panels if a 24V battery is used?
- A: The maximum PV input voltage is 230VDC (some models up to 480VDC), regardless of the battery voltage, as long as it's within the controller's operating range for the battery system (e.g., 12V-96V auto-identification).
- Q: Does it come with a WIFI module?
- A: The controller supports an RS485 WIFI device, but it is typically sold separately.
11. Warranty and Support
For warranty information, technical support, or any inquiries regarding your HXCONTROLLER MPPT Solar Charge Controller, please contact the seller or manufacturer directly. Ensure you have your product model and purchase details available when seeking support.