Introduction
The JRHC 710WL is a versatile wireless 1D laser barcode scanner designed for efficient data capture in various environments such as supermarkets, convenience stores, and warehouses. This device offers ease of use with its plug-and-play functionality and robust decoding capabilities for a wide range of 1D barcodes, including damaged, distorted, and inverse color codes. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your JRHC 710WL barcode scanner.
Figure 1: JRHC 710WL Wireless 1D Laser Barcode Scanner with connectivity icons.
Setup
The JRHC 710WL barcode scanner is designed for simple plug-and-play operation, requiring no complex software installation.
1. Package Contents
- JRHC 710WL Barcode Scanner
- USB Receiver (for 2.4G Wireless connection)
- USB Cable (for Wired connection and charging)
- Instruction Manual
2. Connecting the Scanner
The scanner supports both 2.4G wireless and USB wired connections.
2.1. 2.4G Wireless Connection
- Insert the USB receiver into an available USB port on your computer.
- The computer will automatically detect and install the necessary drivers.
- Turn on the barcode scanner. It should automatically pair with the receiver.
- A successful connection is usually indicated by a specific beep sound or LED indicator on the scanner.
Figure 2: Plug and Play setup, compatible with Windows, Mac OS, and Linux operating systems.
2.2. USB Wired Connection
- Connect one end of the USB cable to the scanner and the other end to an available USB port on your computer.
- The computer will automatically detect and install the necessary drivers.
- The scanner is ready for use. This mode also charges the scanner's internal battery.
3. System Compatibility
The scanner is compatible with various operating systems, including Windows, Mac OS, and Linux.
Operating Instructions
1. Scanning Modes
The JRHC 710WL offers three primary scanning modes:
- Manual Scanning Mode: Press the trigger button to initiate a scan.
- Automatic Scanning Mode: The scanner continuously scans without needing to press the trigger, ideal for hands-free operation with a stand (if applicable).
- Continuous Scanning Mode: The scanner continuously emits a laser beam and scans any barcode placed in its path.
Refer to the included quick setup guide or scan specific configuration barcodes (if provided) to switch between these modes.
Figure 3: The scanner's capability to identify various 1D barcode types.
2. Decoding Capability
The scanner is equipped with a 100W resolution module, enabling it to scan all standard 1D codes, as well as damaged, folded, reflective, and inverse color codes.
Figure 4: Super Decoding Capability for various barcode conditions.
3. Advanced Settings
The scanner supports various customizable settings:
- Beep Setting: Turn the sound on or off for scan confirmations.
- Add Prefix and Suffix: Customize scanned data by adding characters before or after the barcode data.
- Multi-language Support: The scanner supports nearly 25 languages, including English (default), Italian, Portuguese, Japanese, Spanish, French, and German. To switch languages, scan the corresponding configuration barcode in the manual.
Figure 5: Customization options for beep settings, prefixes, suffixes, and multi-language support.
4. Wireless Transmission Range
The 2.4G wireless mode offers a long transmission distance:
- Up to 100 meters (328 feet) in a barrier-free environment.
- Up to 30 meters (98 feet) in environments with obstacles.
Figure 6: Wireless transmission range in different environments.
Maintenance
1. Battery Life and Charging
The scanner features a built-in 2600mAh battery, supporting continuous scanning for up to 20 working days or over 100,000 scans consecutively on a full charge. To charge the scanner, connect it to a power source using the provided USB cable.
Figure 7: Battery performance and continuous usage.
2. Durability
The scanner is designed with an anti-fall feature, enhancing its durability and resistance to accidental drops.
3. Cleaning
To clean the scanner, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scanner not connecting wirelessly | USB receiver not properly inserted or not detected; scanner battery low; out of range. | Ensure USB receiver is firmly inserted. Check scanner battery level and charge if necessary. Move scanner closer to the receiver. |
| Scanner not reading barcodes | Barcode damaged or unreadable; incorrect scanning mode; scanner lens dirty; barcode type not supported. | Ensure barcode is clear and undamaged. Try different scanning modes. Clean the scanner lens. Verify the barcode type is listed in the specifications. |
| No beep sound after scanning | Beep sound is turned off. | Scan the 'Turn On Sound' configuration barcode (refer to the full manual for specific barcodes). |
| Scanner not reading barcodes from a screen | This model is a 1D laser scanner primarily designed for printed barcodes. | The JRHC 710WL is optimized for scanning 1D barcodes from paper. It may not reliably read barcodes displayed on digital screens. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 710WL |
| Type | Barcode Scanner |
| Scanning Light Source | Laser Light (650nm visible laser diode) |
| Interface Type | USB |
| Scan Element Type | CMOS |
| Scan Speed | 300 scans/second |
| Optical Resolution | 2400dpi |
| Colour Depth | 32 Bit |
| Scan Breadth | A3 |
| Processor | ARM 32-bit Cortex |
| Wireless Technology | 2.4Ghz Wireless |
| Wireless Range | 100m (328ft) barrier-free; 30m (98ft) with obstacles |
| Battery | 2600mAh built-in |
| Continuous Working Days | Up to 20 days |
| Supported 1D Barcodes | UPC-A, UPC-E, EAN-8, EAN-13, ISBN, Code 128, GS1 128, ISBT 128, Code 39, Code93, Code 11, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5, Standard 2 of 5, Codabar, MSI/MSI PLESSEY, GS1 DataBar |
| Product Dimensions (Package) | Length: 24cm, Width: 13cm, Height: 10cm |
| Product Weight (Package) | 0.411 kg |
| Certification | CE |
| Origin | Mainland China |
User Tips
- For optimal performance, ensure the barcode is flat and well-lit when scanning.
- While the scanner is robust, avoid intentionally dropping it or exposing it to extreme temperatures or moisture.
- If you need to scan barcodes from digital screens, please note that this 1D laser model is primarily designed for printed barcodes and may not be suitable for screen scanning. Consider a 2D imager scanner for such applications.
Warranty and Support
Your JRHC 710WL Barcode Scanner comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation provided with your purchase or contact JRHC customer support. If you encounter any issues not covered in this manual, or require further assistance, please reach out to the seller or JRHC customer service for technical support.