1. Introduction
The ZOYI ZT703S is a versatile 3-in-1 device that ingeniously integrates the functions of a digital oscilloscope, a high-precision multimeter, and a signal generator. Designed for efficiency and accuracy, it features a 3.5-inch color display for clear readings and an intuitive user interface. This manual provides essential information for the safe and effective use of your ZT703S.
2. Safety Information
Please read and understand all safety warnings and operating instructions before using this device. Failure to do so may result in injury or damage to the device.
- Always ensure the device is properly connected and configured for the measurement you intend to perform.
- Do not exceed the maximum input ratings for voltage and current as specified in the technical indications.
- Use only the provided test probes and accessories.
- The device is equipped with full-grade overload protections, built-in intelligent anti-burn chip, and double ceramic fuses. However, misuse can still cause damage.
- Avoid using the device in wet environments or near flammable gases.
- Do not attempt to repair or modify the device yourself. Refer to qualified service personnel.
3. Package Contents
Verify that all items are present in your package. If any items are missing or damaged, please contact your vendor.
Standard Configuration:
- 1 x ZOYI ZT703S 3-in-1 Oscilloscope Multimeter
- 1 x Test Probe with Accessory Set
- 1 x Pair of Meter Pens (Red/Black)
- 1 x USB Cable
- 1 x Storage Bag

High Configuration (Optional):
- 1 x ZOYI ZT703S 3-in-1 Oscilloscope Multimeter
- 2 x Test Probes with Accessory Sets
- 1 x Pair of Meter Pens (Red/Black)
- 1 x USB Cable
- 1 x Storage Bag

4. Product Overview
The ZOYI ZT703S combines a digital oscilloscope, multimeter, and signal generator in a compact, handheld design. It features a 3.5-inch HD color screen with 320*240 resolution for clear display of waveforms and measurement data.

- Display: 3.5-inch HD color screen (320*240 resolution)
- Buttons: F1-F4 function keys, REC (Record), AUTO RANGE, HOLD/SAVE, MODE, MENU, and navigation keys.
- Input Terminals: 10A current input, mA current input, COM (Common), VΩHz-||-+ (Voltage, Resistance, Frequency, Capacitance, Diode, Buzzer input).
- Oscilloscope Probe Interfaces: CH1, CH2 (Dual Channel Oscilloscope Probe Interface).
- USB Port: Type-C interface for data transmission and fast charging.

5. Setup
5.1 Battery Installation
The ZT703S comes with a built-in 3400mAh 18650 battery. To access the battery compartment for maintenance or replacement:
- Ensure the device is powered off and all probes are disconnected.
- Carefully remove the back cover of the device.
- The 18650 battery is located in the center of the circuit board.
- Replace the back cover securely after installation or inspection.

5.2 Connecting Probes
Proper connection of probes is crucial for accurate and safe measurements.
- Multimeter Probes: Connect the red meter pen to the VΩHz-||-+ terminal and the black meter pen to the COM terminal for voltage, resistance, capacitance, diode, and frequency measurements. For current measurements, connect the red meter pen to the 10A or mA terminal (depending on the expected current) and the black meter pen to the COM terminal.
- Oscilloscope Probes: Connect the oscilloscope probes to the CH1 and/or CH2 BNC connectors at the top of the device. Ensure a secure connection.
5.3 Powering On/Off
- Power On: Long press the 'REC' button (power button) to turn on the device.
- Power Off: Long press the 'REC' button again to turn off the device. The device also features an 'AUTO POWER OFF' function to conserve battery.
5.4 Charging and Data Transfer
The ZT703S supports fast charging and data transfer via its USB Type-C port.
- Charging: Connect the device to a USB power source using the provided Type-C cable.
- Data Transfer: Connect the device to a PC using the Type-C cable to access stored waveforms and measurement data.

6. Operating Instructions
6.1 Multimeter Mode
The ZT703S functions as a high-precision multimeter with True RMS measurement capabilities. Use the 'MODE' button to cycle through different measurement functions.
- Voltage (DC/AC): Connect probes to VΩHz-||-+ and COM. Select DCV or ACV mode using 'MODE'.
- Current (DC/AC): Connect red probe to 10A or mA, black to COM. Select DCA or ACA mode using 'MODE'.
- Resistance: Connect probes to VΩHz-||-+ and COM. Select Ω mode using 'MODE'.
- Capacitance: Connect probes to VΩHz-||-+ and COM. Select capacitance mode using 'MODE'.
- Diode/Buzzer: Connect probes to VΩHz-||-+ and COM. Select diode or buzzer mode using 'MODE'.
- Frequency: Connect probes to VΩHz-||-+ and COM. Select Hz mode using 'MODE'.
- AUTO RANGE: Press 'AUTO RANGE' for automatic scaling of measurements.
- HOLD/SAVE: Short press to hold the current reading. Long press to save data.
6.2 Oscilloscope Mode
The ZT703S features a dual-channel digital oscilloscope with 50MHz bandwidth and up to 280MS/s real-time sampling rate.

- Selecting Oscilloscope Mode: Use the 'MODE' button to switch to oscilloscope function.
- Dual Channel Input: Connect probes to CH1 and CH2 for simultaneous two-channel waveform display, allowing for signal comparison and analysis.
- Adjusting Waveforms: Use the navigation keys (up/down/left/right) to adjust parameters like vertical scale (V/div), horizontal scale (Time/div), and trigger level.
- Trigger Modes: Select between Auto, Normal, and Single trigger modes using the appropriate menu options.
- Advanced Functions: The oscilloscope includes features like Overclocking Mode, Afterglow Mode (Minimum, 500ms, 1s, 10s, Unlimited), and X-Y Mode for enhanced analysis.
- Waveform Save & Screenshot: Long press the 'SAVE' button for 2 seconds to capture a screenshot of the current waveform display. Saved data can be accessed via PC connection.

6.3 Signal Generator Mode
The built-in signal generator can output various waveforms for testing circuits.
- Selecting Signal Generator Mode: Use the 'MODE' button to switch to signal generator function.
- Waveform Types: Choose from Sine wave, Square wave, Sawtooth wave, Half wave, and Full wave.
- Adjusting Parameters: Adjust the Peak-to-Peak Voltage (VPP) and Frequency (FREQ) of the output signal using the navigation keys and menu options.

7. Specifications
Detailed technical specifications for the ZOYI ZT703S.
| Functionality | Range | Resolution | Accuracy |
|---|---|---|---|
| DC Voltage V | 2.5000V-1000.0V | 0.0001V~0.1V | ± (0.5%+3) |
| DC voltage mV | 25.000mV-250.00mV | 0.001mV~0.01mV | ± (0.5%+3) |
| AC Voltage V | 2.5000V-750.0V | 0.0001V~0.1V | ± (0.5%+3) |
| AC voltage mV | 25.000mV-250.00mV | 0.001mV~0.01mV | ± (0.5%+3) |
| DC current A | 2.5000A-10.000A | 0.0001A~0.001A | ± (0.5%+3) |
| DC current mA | 25.000mA-250.00mA | 0.001mA~0.01mA | ± (0.5%+3) |
| AC current A | 2.5000A-10.000A | 0.0001A~0.001A | ± (0.8%+3) |
| AC current mA | 25.000mA-250.00mA | 0.001mA~0.01mA | ± (0.8%+3) |
| AC current frequency response | 40Hz~1kHz | ||
| Resistance | 0-250.0MΩ | 0.01Ω~0.1MΩ | ± (1%+3) |
| Capacitance | 0-99.99mF | 0.001nF~0.01mF | ± (2.0%+5) |
| Frequency | 0-999.9kHz | 0.01Hz~0.1kHz | ± (0.1%+3) |
| Diode | √ | Low battery indicator | √ |
| Buzzer | √ | Screen Backlight | √ |
| Display | 25000 words | Language | Chinese/English |
| Range | Auto+Manual | Screen Size | 3.5 inch |
| Material | ABS+TPE | Screen Resolution | 320*240 |
| Sampling Rate | 3 times/second | Battery | 18650 Battery*1 |
| True RMS | √ | Battery | 380g |
| Data Hold | √ | Size | 177*89*40mm |
| Backlighting | √ |

Oscilloscope Specifications:
- Bandwidth: 50MHz
- Sampling Rate: 1.5Sa/S - 280MSa/S
- Waveform Interpolation: (sinx)x
- Sweep Speed: 10ns/div - 20s/div
- Time Base Accuracy: 20ppm
- Record Length: Up to 128Kbyte
- Channels: 2
- Trigger: Auto, Normal, Single
- Automatic Measurement: Period, Frequency, Peak-to-Peak, Max, Min, RMS, Duty Cycle, Number of Pulses
- Operation Mode: Normal mode 200MSa/s, High speed mode 280MSa/s
- Display Mode: YT, X Y, Rolling
- Afterglow Mode: Minimum, 500ms, 1s, 10s, Unlimited
Signal Generator Specifications:
- Waveforms: Sinewave, Squarewave, Sawtoothwave, Halfwave, Fullwave
General Specifications:
- Operating Temperature: 0-40℃
- Item Size: 177 * 89 * 40mm / 6.97 * 3.50 * 1.57in
- Weight: 380g

8. Troubleshooting
If you encounter issues with your ZOYI ZT703S, please refer to the following common troubleshooting steps:
- No Display/Device Not Turning On: Ensure the battery is charged. Connect the device to a USB power source and try again. If the issue persists, the battery may need replacement.
- Incorrect Multimeter Readings: Check that the probes are correctly connected to the appropriate input terminals (VΩHz-||-+, 10A, mA, COM) for the selected measurement function. Verify the measurement range is suitable for the expected value, or use 'AUTO RANGE'.
- No Oscilloscope Waveform: Ensure the oscilloscope probes are securely connected to the CH1/CH2 BNC connectors and the circuit under test. Check the trigger settings (level, mode) and adjust the vertical and horizontal scales.
- Signal Generator Output Issues: Verify that the signal generator mode is active and the desired waveform type, VPP, and frequency are selected. Ensure the output is connected to the target circuit correctly.
- Device Freezes or Becomes Unresponsive: Try restarting the device by long-pressing the power button. If it remains unresponsive, allow the battery to fully discharge and then recharge it.
9. Maintenance
To ensure the longevity and optimal performance of your ZOYI ZT703S, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents. Keep the screen clean and free from scratches.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, ensure the battery is partially charged (around 50%) to prolong its lifespan.
- Battery Care: The device uses a built-in 18650 battery. Avoid fully discharging the battery frequently. Recharge the battery when the low battery indicator appears.
- Probe Care: Inspect test probes and oscilloscope probes regularly for any signs of wear or damage. Replace damaged probes immediately to ensure safety and accuracy.
10. User Tips
- The ZT703S is categorized under 'DIY Supplies' specifically for 'Electrical' work, making it suitable for hobbyists and professionals in electronics.
- Utilize the dual-channel oscilloscope feature for comparing two signals simultaneously, which is highly beneficial for analyzing phase relationships or troubleshooting complex circuits.
- Remember to use the 'HOLD/SAVE' function to capture transient signals or important measurement data for later review or analysis on a PC.
11. Warranty and Support
The ZOYI ZT703S comes with a 12-month Manufacturer's limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories typically come with a 3-month warranty. Please retain your proof of purchase for warranty claims.
For technical support or warranty inquiries, please contact your retailer or the manufacturer's customer service.