Introduction
The RUBOT P02 is a compact, powerful, and portable handheld vacuum cleaner designed for quick and efficient cleaning tasks in various environments, including cars, homes, and offices. Its wireless design and strong 7000 Pa suction make it ideal for tackling dust, crumbs, debris, and pet hair in hard-to-reach areas. Featuring a sleek design and a 3-layer washable filter system, the P02 is your mighty little helper for daily cleaning.
Package Contents
Please check the package for the following items:
- RUBOT P02 Handheld Vacuum Cleaner
- USB-C Charging Cable
- Brush Nozzle
- Long Crevice Nozzle
- Blowing Hose
- Storage Bag
- H11 HEPA Filter (pre-installed)
- Stainless Steel Filter (pre-installed)
- Sponge Filter (pre-installed)
- Additional H11 HEPA Filter
- Small Cleaning Brush (for filters)
Specifications
| Feature | Specification |
|---|---|
| Weight | 1.2 lbs (<3 kg) |
| Suction Power | 7000 Pa |
| Power | 60W |
| Voltage | 12V |
| Battery Type | Li-ion |
| Battery Life | Up to 20 minutes (continuous cordless cleaning) |
| Charging Time | 3-4 hours |
| Dust Box Capacity | <0.5 L |
| Filter System | 3-layer (Stainless Steel, H11 HEPA, Sponge Filter) |
| Nozzles Included | Brush Nozzle, Long Crevice Nozzle, Blowing Hose |
| Operating Modes | 1-2 |
| Noise Level | <70dB |
| Installation | Hand Held |
| Cord Length | Wireless |
| LCD | No |
| Timing Reservation | No |
| Function | Dry |
| Certifications | EMC, ROHS, UL, CE |
Setup and Charging
Before first use, ensure the vacuum is fully charged to achieve optimal performance.
- Charging: Connect the provided USB-C charging cable to the vacuum's charging port and a suitable USB power adapter (not included). The LED indicator lights will show the charging status. A full charge typically takes 3-4 hours.
- Assembling Nozzles: Select the appropriate nozzle for your cleaning task. Attach it firmly to the suction inlet of the vacuum. For blowing functions, attach the blowing hose to the air outlet at the rear of the vacuum.
Operating Instructions
- Power On/Off: Press the power button located on the top of the vacuum to turn it on. Press again to turn it off. The vacuum may have 1-2 operating modes; press the power button to cycle through them if applicable.
- General Cleaning: Hold the vacuum firmly and move the suction inlet over the area to be cleaned. The powerful 7000 Pa suction will pick up dust, crumbs, and debris.
- Using the Brush Nozzle: Attach the brush nozzle for cleaning delicate surfaces, keyboards, or to agitate stubborn dirt before suction.
- Using the Long Crevice Nozzle: Use the long crevice nozzle to reach tight spaces, corners, and gaps in car interiors, furniture, or electronics.
- Using the Blowing Hose: Attach the blowing hose to the air outlet to create a strong airflow. This is useful for blowing dust out of crevices, vents, or other areas where suction is difficult.
Maintenance
Regular cleaning of the dust container and filters is crucial for maintaining optimal suction performance and extending the lifespan of your vacuum cleaner.
- Emptying the Dust Container:
- Ensure the vacuum is turned off.
- Twist and detach the transparent dust container from the main body.
- Carefully empty the collected dust and debris into a waste bin.
- Cleaning the Filters:
- After emptying the dust container, unscrew the metal filter.
- Remove the H11 HEPA filter and the sponge filter.
- Wash all three filter components (stainless steel, H11 HEPA, sponge) under running water. Use the provided small cleaning brush to remove stubborn dirt from the HEPA filter.
- Allow all filters to air dry completely before reassembling. Do not use the vacuum with wet filters.
- Reassemble the filters in the correct order (sponge, HEPA, stainless steel) and reattach the dust container to the vacuum body.
Troubleshooting
If you encounter any issues with your RUBOT P02, please refer to the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on. | Battery is depleted. | Charge the vacuum for 3-4 hours. |
| Weak suction. | Dust container is full. | Empty the dust container. |
| Filters are clogged. | Clean and air dry the filters. | |
| Nozzle or suction inlet is blocked. | Remove any obstructions from the nozzle or suction inlet. | |
| Short battery life. | Battery not fully charged. | Ensure the vacuum is fully charged before use. |
| Battery degradation over time. | Contact customer support if battery life significantly decreases. |
User Tips
Maximize your cleaning experience with these helpful tips:
- For optimal performance, empty the dust container after each use, especially when cleaning fine dust.
- Always ensure filters are completely dry before reassembling to prevent mold growth and maintain suction power.
- Utilize the blowing function to clear dust from hard-to-reach areas like car vents or keyboard gaps before vacuuming.
- Store the vacuum and its accessories in the provided storage bag to keep them organized and protected.
Warranty and Support
For warranty information, technical support, or replacement parts, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.
