EFT Z30/Z50

Contents

EFT Three Port Adapter for Landing Gear φ30/Z Series

Model: Z30/Z50 Agricultural Drone Series

Introduction

The EFT Three Port Adapter is a stable and reliable accessory designed for the φ30/Z Series landing gear of EFT Z30/Z50 Agricultural Drones. This package includes four individual adapters, providing secure attachment points for various drone components or accessories. Constructed from durable composite material, these adapters ensure a firm grip and long-lasting performance in demanding agricultural environments.

Setup Instructions

Follow these steps to properly install the EFT Three Port Adapters on your drone's landing gear:

  1. Identify Landing Gear: Locate the φ30mm landing gear tubes on your EFT Z30/Z50 Agricultural Drone where the adapters are to be installed.
  2. Prepare Adapter: Each adapter consists of two halves. Gently separate the two halves of one adapter.
  3. Position Adapter: Place the two halves of the adapter around the φ30mm landing gear tube, ensuring they align correctly to form a complete clamp.
  4. Insert Screw: Insert one of the provided screws through the designated hole in the adapter.
  5. Secure Adapter: Using an appropriate tool, tighten the screw until the adapter is firmly secured to the landing gear tube. Do not overtighten, as this may damage the adapter or the landing gear.
  6. Repeat: Repeat steps 2-5 for the remaining three adapters, or as many as required for your specific setup.
Four EFT landing gear adapters and four screws
Figure 1: Components included in the package (4 adapters, 4 screws).
A single EFT landing gear adapter shown open
Figure 2: An open adapter, showing its two-part design for easy installation.
A single EFT landing gear adapter shown closed
Figure 3: A closed adapter, illustrating how it clamps around the landing gear tube.

Operating the Adapter

The EFT Three Port Adapter functions as a passive mounting point. Once securely installed, it provides stable attachment locations on your drone's landing gear. Ensure all adapters are tightly fastened before operating the drone, especially when carrying additional equipment or payloads.

Maintenance

To ensure the longevity and reliability of your adapters, perform the following maintenance checks:

  • Regular Inspection: Periodically inspect the adapters for any signs of wear, cracks, or damage, especially after heavy use or impacts.
  • Check Tightness: Before each flight, verify that all screws securing the adapters are tight. Loose screws can lead to instability or detachment during flight.
  • Cleaning: Clean the adapters with a soft, dry cloth. Avoid using harsh chemicals that may degrade the composite material.
  • Storage: Store spare adapters in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

ProblemPossible CauseSolution
Adapter feels loose after installationScrews not tightened sufficiently. Incorrect landing gear diameter.Ensure screws are tightened firmly. Verify that the landing gear tube is φ30mm.
Adapter does not fit around landing gearLanding gear diameter is not φ30mm.Confirm your drone's landing gear diameter. These adapters are specifically designed for φ30mm tubes.
Visible damage to adapterImpact, excessive force during installation, material fatigue.Replace the damaged adapter immediately to prevent failure during flight.

Specifications

FeatureDetail
Model NumberZ30/Z50
CompatibilityEFT Z30/Z50 Agricultural Drones, φ30/Z Series Landing Gear
Quantity per package4 pieces
MaterialComposite Material
For Vehicle TypeAirplanes (Agricultural Drones)
Is ElectricNo Battery
Is Batteries IncludedNo
Package Dimensions (Approx.)Length: 35 cm, Width: 20 cm, Height: 15 cm
Package Weight (Approx.)1.2 kg
Recommended Age14+ years
OriginMainland China

User Tips

  • Always double-check the compatibility of any accessories you plan to mount using these adapters to ensure they fit the available ports.
  • For optimal stability, distribute any mounted weight evenly across the landing gear.
  • Consider applying a small amount of thread locker to the screws during installation to prevent loosening from drone vibrations, though this is not strictly required.

Warranty and Support

For warranty information, technical support, or replacement parts, please contact the original seller or the manufacturer, EFT. Keep your purchase receipt as proof of purchase. Specific warranty terms may vary by region and seller.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.