VALKYRIE M1 Tri-mode Wireless Gaming Mouse

1. Introduction

The VALKYRIE M1 is a high-performance tri-mode wireless gaming mouse designed for e-sports enthusiasts and PC gamers. Featuring the advanced Pixart PAW3395 sensor, a lightweight 58g design, and versatile connectivity options, it delivers precision, speed, and comfort for extended gaming sessions. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your VALKYRIE M1 mouse.

2. Package Contents

Please check the box for the following items:

• Mouse body (VALKYRIE M1 Gaming Mouse)
• TYPE-C data cable
• Mouse Foot (PTFE Foot Stickers)
• 4K wireless receiving charging base (optional, for 4000Hz polling rate)
• User Manual
• Warranty Card

3. Product Overview

The VALKYRIE M1 mouse is engineered for peak gaming performance, integrating several key features:

• Pixart PAW3395 Sensor: Provides pixel-level precision with up to 26000 DPI, 650 IPS tracking rate, and 50G acceleration.
• Tri-mode Connectivity: Offers flexible connection options including Wired (USB Type-C), 2.4G Wireless, and Bluetooth 5.0.
• Lightweight Design: Weighs approximately 58g for effortless movement and reduced fatigue during long gaming sessions.
• Durable Switches: Equipped with Hua Nuo switches rated for 80 million clicks, providing crisp and clear feedback.
• High Polling Rate: Supports up to 4000Hz polling rate in wireless mode with the 4K wireless receiving charging base, and up to 1000Hz in wired mode.
• RGB Lighting: Customizable RGB lighting effects.
• 400mAh Battery: Ensures long-lasting performance.
• PTFE Foot Stickers: For smooth gliding across surfaces.

4. Specifications

5. Setup

5.1 Charging the Mouse

Before first use, it is recommended to fully charge the mouse. Connect the supplied TYPE-C data cable to the mouse and a USB power source. Alternatively, place the mouse on the 4K wireless receiving charging base (if included) to charge.

5.2 Connecting the Mouse

The VALKYRIE M1 supports three connection modes:

• 2.4G Wireless Mode:
  1. Insert the 2.4G wireless receiver (standard or 4K charging base) into an available USB port on your computer.
  2. Turn on the mouse. It should automatically connect.
  3. For 4000Hz polling rate, ensure you are using the 4K wireless receiving charging base.
• Bluetooth Mode:
  1. Turn on the mouse and switch it to Bluetooth mode (refer to mouse bottom switch if available).
  2. On your computer or device, go to Bluetooth settings and search for new devices.
  3. Select "VALKYRIE M1" (or similar name) from the list to pair.
• Wired Mode:
  1. Connect the mouse to your computer using the supplied TYPE-C data cable.
  2. The mouse will function immediately in wired mode and will also charge.

6. Operating Instructions

6.1 DPI Adjustment

The VALKYRIE M1 features a dedicated DPI button for on-the-fly sensitivity adjustments. The mouse comes with preset DPI levels (e.g., 400/800/1200/1600/3200/5200). Press the DPI button to cycle through these settings. Advanced users can customize DPI settings further using the mouse's driver software (if available).

6.2 RGB Lighting Control

The mouse features customizable RGB lighting. Use the dedicated RGB button (if available) or the driver software to switch between preset light effects and customize colors and patterns.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the mouse. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters the mouse.
• Sensor Care: Keep the optical sensor area on the bottom of the mouse clean and free from dust or debris to ensure accurate tracking.
• Foot Stickers: The PTFE foot stickers are designed for durability. If they show significant wear, replacement foot stickers can be purchased to maintain optimal glide.
• Storage: When not in use for extended periods, store the mouse in a dry, cool place.

8. Troubleshooting

Q: The mouse is not connecting via Bluetooth.

A: Ensure the mouse is switched to Bluetooth mode and is discoverable. Check your device's Bluetooth settings to ensure it's enabled and searching for new devices. While the product is described as 'Tri-mode' including Bluetooth, some specific variants or older information might suggest otherwise. Always refer to the physical switch on your mouse and your device's Bluetooth pairing process.

Q: The mouse is not responding.

A: Check the battery level and charge the mouse if necessary. Ensure the correct connection mode (2.4G, Bluetooth, or Wired) is selected and properly established. Try connecting the mouse in wired mode to rule out wireless issues.

Q: The cursor movement is erratic or inaccurate.

A: Clean the optical sensor on the bottom of the mouse. Ensure the mouse is being used on a suitable surface (a mouse pad is recommended). Check DPI settings and adjust if too high or low for your preference.

9. User Tips

• Optimal Polling Rate: For competitive gaming, utilize the 4K wireless receiving charging base to achieve the maximum 4000Hz polling rate, which provides extremely low latency.
• Customization: Explore the mouse's software (if available) to customize DPI stages, button assignments, macro functions, and RGB lighting effects to suit your personal preferences and gaming style.
• Battery Management: Regularly charge your mouse, especially before long gaming sessions, to avoid interruptions. The charging base offers a convenient way to keep your mouse powered.

10. Warranty and Support

The VALKYRIE M1 mouse comes with a 1-year warranty. This warranty covers non-human-caused functional failures within one year from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact the seller or manufacturer directly. Refer to the warranty card included in your package for specific contact information.