STARTRC ALIENTECH DUO 3

Contents

ALIENTECH DUO 3 Antenna Signal Booster User Manual

2.4G/5.2G/5.8G Range Extender for DJI, Autel, and Parrot FPV Drones

1. Introduction and Overview

The ALIENTECH DUO 3 Antenna Signal Booster is a portable, tri-band device designed to enhance communication range and signal strength for Unmanned Aerial Vehicles (UAVs) and Wi-Fi applications. It operates simultaneously across the 2.4G, 5.2G, and 5.8G frequency bands, making it highly versatile for various drone models including DJI Mavic 3 Pro, Mini 4 Pro, Air3, Autel, and Parrot FPV Drones.

This device is compliant with IEEE 802.11a/b/g/n/ac standards, ensuring compatibility with a wide range of wireless networks. It incorporates advanced technologies such as spread spectrum, multi-carrier modulation, time-division duplexing, and digital video transmission to optimize signal quality and minimize interference. The DUO 3 is FCC and CE-compliant, meeting stringent regulatory requirements for transmission power and signal integrity.

ALIENTECH DUO 3 Signal Booster front view
Figure 1: Front view of the ALIENTECH DUO 3 Signal Booster.

2. Product Features

  • Enhanced Signal Range: Optimized space design and doubled power amplifier provide a signal range boost of over two times compared to DUO II, equivalent to 5-10 times the range of a stock antenna.
  • Faster Data Transmission: A new chip significantly enhances data transmission speed, making it four times faster than its predecessor, the DUO II.
  • Mu-Mimo Technology: Features dual transmission and reception capabilities for improved signal strength and overall performance, especially in weak signal areas.
  • Wide Frequency Band Support: Supports almost all 5G frequency bands, expanding from the previous 5.8G range to a wide 5.15Ghz–5.85Ghz range, ensuring compatibility with a broader range of wireless devices.
  • Durable Construction: Built with a sleek all-aluminum alloy frame for enhanced durability and resistance to tough conditions.
  • Optimized Heat Dissipation: The aluminum alloy structure aids in efficient heat dissipation, ensuring optimal performance of internal modules and chips.
  • Extended Battery Life: Equipped with an upgraded 3000 mAh battery, providing longer standby and working times.

3. Setup and Installation

The ALIENTECH DUO 3 is designed for easy integration with various drone remote controllers. Follow these steps for proper setup:

3.1 Attaching to Remote Controller

  1. Identify the antenna ports on your drone's remote controller.
  2. Align the DUO 3 booster with the controller's antenna mounts.
  3. Securely attach the DUO 3 to the controller, ensuring a stable connection. The booster is compatible with various DJI controllers, including those for Mavic 3 Pro, Mini 4 Pro, Air3, and others.
  4. If using a smartphone with your controller, ensure it is properly mounted and connected to the controller.
DUO 3 attached to a DJI RC controller
Figure 2: DUO 3 attached to a DJI RC controller.
DUO 3 attached to a DJI RC-N1/N2 controller with a smartphone
Figure 3: DUO 3 attached to a DJI RC-N1/N2 controller with a smartphone.

3.2 External Coaxial Cable Usage

The DUO 3 can also be used with external coaxial cables for extended reach. Ensure you use appropriate cables with QMA Female/Male connectors for secure and lockable connections.

QMA Female/Male connectors for coaxial cables
Figure 4: QMA Female/Male connectors for coaxial cables.

The recommended cable types are RG223, CG240, and RG8, compliant with MIL-C-17 standard. These cables offer different characteristics suitable for various applications and lengths, with up to 35m possible in 5.8G mode.

Illustration of RG223, CG240, RG8 coaxial cable types
Figure 5: Illustration of RG223, CG240, RG8 coaxial cable types.

4. Operating Instructions

Once the ALIENTECH DUO 3 is securely attached to your remote controller, operating it is straightforward:

  1. Power On: Ensure the DUO 3 is adequately charged and powered on. Check the indicator lights for status.
  2. Controller Power On: Power on your drone's remote controller and establish a connection with your drone as per its manufacturer's instructions.
  3. Automatic Operation: The DUO 3 automatically detects and operates across the 2.4G, 5.2G, and 5.8G frequency bands. It features automatic frequency switching and channel selection to maintain optimal signal quality.
  4. Monitor Signal: While operating your drone, observe the signal strength indicators on your remote controller. The DUO 3 will actively boost the signal to extend your range and improve reliability.
DUO 3 in an outdoor setting with a drone controller
Figure 6: DUO 3 in an outdoor setting, enhancing drone control.

5. Maintenance

To ensure the longevity and optimal performance of your ALIENTECH DUO 3 Signal Booster, follow these maintenance guidelines:

  • Cleaning: Regularly wipe the exterior of the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the DUO 3 in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
  • Battery Care: The 3000 mAh battery should be charged regularly, even if the device is not frequently used, to maintain battery health. Avoid fully discharging the battery for extended periods.
  • Physical Inspection: Periodically check the aluminum alloy frame for any signs of damage. Ensure all connections are secure before each use.
  • Heat Dissipation: The aluminum alloy design is optimized for heat dissipation. Ensure the device's vents (if any) are not obstructed during operation.

6. Troubleshooting

If you encounter issues with your ALIENTECH DUO 3 Signal Booster, consider the following:

  • No Power: Ensure the battery is fully charged. Connect the device to a power source and check if the charging indicator lights up.
  • Poor Signal Boost: Verify that the DUO 3 is correctly and securely attached to your remote controller. Ensure there are no obstructions between the controller/booster and the drone. Check for strong electromagnetic interference in the operating area.
  • Connection Issues: Confirm that your drone controller is properly connected to your drone. The DUO 3 enhances the existing signal; it does not establish the initial connection.
  • Overheating: While the aluminum frame aids in heat dissipation, prolonged use in extreme heat or obstructed airflow can cause overheating. Ensure proper ventilation.

If problems persist, consult the manufacturer's support resources.

7. Specifications

7.1 General Specifications

  • Model: DUO-2458DSB
  • Tri-Band Operation: 2.4G, 5.2G, and 5.8G (2400MHz~2483.5MHz, and 5100MHz~5850MHz)
  • Working Frequency Band: 2400–2485 MHz, 5.150–5.850 MHz
  • Working Voltage: 6-9V
  • Antenna Gain: 2.4G > 13 dBi ± 1 / 5G > 15 dBi ± 1
  • Antenna Horizontal Half-Radiation Angle: 65-84°
  • Antenna Vertical Half-Radiation Angle: 63–75°
  • 2.4G Receive Gain: 12dB ± 1
  • Receive Gain of 5.2G and 5.8G: 15dB ± 1
  • Transmit Gain: 15 dB ± 1
  • Input Power Range: 10–25 dBm
  • EVM: 3%@28 dBM 802.11 ac 6.93Gbps MIMO OFDM 64QAM BW 80 MHz
  • Electric Current: 435 mA at POUT 28 dBm 9V
  • Noise Coefficient: ≤ 2.5 dB
  • Transmission Delay: ≤ 1 μs
  • Operating Temperature: -20°C ~ 80°C
  • Battery Voltage and Capacity: 3.7V, 3000 mAh

7.2 Antenna Gain Patterns

Antenna Gain pattern for 2450MHz
Figure 7: Antenna Gain pattern for 2450MHz.
Antenna Gain pattern for 5850MHz
Figure 8: Antenna Gain pattern for 5850MHz.

7.3 Coaxial Cable Specifications

Table 1: Coaxial Cable Construction Materials
ComponentRG223 MaterialsRG223 O.D. (mm)CG240 MaterialsCG240 O.D. (mm)RG8 MaterialsRG8 O.D. (mm)
Inner ConductorSilvered Copper Wire0.90Bare Copper1.42Copper Clad Aluminum2.74
DielectricPolyethylene2.95Foam PE3.81Foam PE7.24
Outer ConductorDouble Silvered Copper Braid3.95Aluminum foil + tinned copper wire braidNom. 4.52Self-adhesive Aluminum Foil + Tinned Copper Wire8.00
JacketBlack PVC5.30Black PE6.10Black PE10.16
Table 2: Coaxial Cable Electrical Specifications
SpecificationRG223CG240RG8
Cable Impedance50 ohm50 ohm50 ohm
Capacitance101.05 pF/m79.4 pF/m78 pF/m
Velocity66%84%85%
Jacket Spark Test5000 Vrms5000 Vrms8000 Vrms
Peak Voltage (KW)1.4 W5.6 W16 W
Operating Frequency12 GHz Max18 GHz Max21 GHz
Table 3: Coaxial Cable Mechanical & Environmental Specifications
SpecificationRG223CG240RG8
Weight60 g/m62 g/m80 g/m
Bend Radius25 mm30 mm51 mm
Temperature Range-25~+70°C-40~+80°C-40~+80°C
RoHS ComplianceCompliantCompliantCompliant
Table 4: Coaxial Cable Attenuation (Typical Value @ 25°C & Sea Level)
Frequency (MHz)RG223 Attenuation (dB/m)CG240 Attenuation (dB/m)RG8 Attenuation (dB/m)
1000.13
4000.270.10
4500.173
9000.248
10000.440.16
25000.424
30000.820.28
50001.100.38
58000.668
60001.270.42

8. User Tips

  • Check Drone Compatibility: Before purchase or use, always verify that the ALIENTECH DUO 3 is compatible with your specific drone model (e.g., DJI Mavic Pro Platinum, Mini 4 Pro, Air3, Autel, Parrot FPV Drones).
  • Optimal Placement: For best results, ensure the DUO 3 is positioned to have a clear line of sight towards the drone during flight.
  • Battery Management: To maximize flight time, ensure both your drone controller and the DUO 3 are fully charged before each session.

9. Warranty and Support

The ALIENTECH DUO 3 Antenna Signal Booster is designed for reliable performance. For any technical assistance, warranty claims, or support inquiries, please contact the STARTRC Official Store directly through their official channels. Keep your purchase receipt as proof of purchase for warranty purposes.

Disclaimer: For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.