STARTRC Drone LED Flshing

Contents

STARTRC Drone Strobe Light User Manual

Model: Drone LED Flshing

1. Introduction

The STARTRC Drone Strobe Light is a compact and lightweight LED flashing light designed to enhance visibility and safety during night flights for drones, as well as for other remote-controlled vehicles, bicycles, motorcycles, helmets, and outdoor sports. It features multiple lighting modes and a memory function for convenience.

Drone with STARTRC strobe light in night flight

Image: A drone equipped with the STARTRC strobe light, illuminating the night sky with red flashing lights, demonstrating enhanced visibility during night operations.

2. Safety Information

⚠ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.

3. Package Contents

Please check the package to ensure all items are present:

  • LED Flashing Light (Strobe Light) x 1
  • Silicone Ring x 2
  • Velcro x 2
  • 3M Adhesive x 2
  • Charging Cable x 1
  • Instruction Manual x 1
Contents of the STARTRC strobe light package including the light, cables, and mounting accessories.

Image: A visual representation of the product package contents, showing the strobe light, charging cable, two silicone rings, two Velcro strips, and two 3M adhesive pads.

4. Specifications

Feature Details
Name Drone LED Flshing Light
Dimensions 40 x 28 x 15.4 mm (1.5 inches)
Net Weight 11g
Material PC (Transparent)
LED Beads 6 PCS (4 White, 1 Red, 1 Green)
Light Modes Monochrome Constant Light, Monochrome Slow Flash (1000ms), Monochrome Fast Flash (500ms), Dual Color Cycle, Tri-Color Breathing Cycle
Battery Capacity 250mAh (Built-in rechargeable)
Charging Voltage 5V
Charging Current 1A
Charging Time Approximately 90 minutes
Usage Time (Full Power) 3 hours (Strobe Mode), 1.5 hours (Constant Light Mode), 5 hours (Slow Flashing Mode)
Compatible Drone Brand DJI

Note on Model Variations: Some versions, such as Model ST-1109184, may have slightly different specifications, including a net weight of 6g, product size of 34x26x12mm, 70mAh battery, 1.2 hours charging time, and 4.5 hours usage time. The primary specifications listed above correspond to the 11g, 40x28x15.4mm model (ST-1133912).

Detailed product parameters for two models of the strobe light, showing dimensions, weight, LED colors, modes, battery, and charging times.

Image: A table detailing product parameters for two models, ST-1109184 and ST-1133912, highlighting differences in size, weight, battery capacity, and usage times.

5. Setup and Installation

The strobe light is designed for quick and non-destructive installation on various objects.

Installation Methods:

  • 3M Adhesive: Peel off the protective film from the 3M adhesive pad and firmly attach it to a clean, flat surface on your drone, RC car, helmet, etc. Then, attach the strobe light to the adhesive pad.
  • Silicone Ring: Wrap the silicone ring around the strobe light and then around a suitable part of your drone arm, bicycle frame, or motorcycle handlebar to secure it.
  • Velcro: Attach one side of the Velcro to the strobe light and the other side to your desired object. Press firmly to secure.
Diagram showing three installation methods: silicone ring, 3M adhesive, and Velcro, for attaching the strobe light to a drone.

Image: Visual guide demonstrating the use of silicone rings, 3M adhesive, and Velcro for quick installation of the strobe light on a drone.

STARTRC strobe light installed on top of a DJI Mini 4 Pro drone.

Image: The strobe light mounted on a DJI Mini 4 Pro drone, showcasing a typical installation scenario.

Step-by-step quick installation guide for the strobe light using Velcro on a drone.

Image: A four-step visual guide demonstrating the quick installation of the strobe light using Velcro on a drone, from applying Velcro to the light and drone, to final attachment.

For a visual guide on installation and operation, please refer to the product video:

Video: Demonstrates the installation process of the strobe light on a drone and showcases its various lighting modes.

6. Operating Instructions

Power On/Off:

  • To Turn On/Off: Long press the button for 2 seconds.

Switching Modes:

  • To Switch Colors: Press the button once.
  • To Switch Light Modes: Press the button twice.

Memory Function:

The strobe light is equipped with a memory function. The light mode active before shutdown will be retained and restored when the device is turned on again.

Diagram showing white, red, and green light modes, button functions for power and mode switching, and the memory function.

Image: Illustrates the different light colors (white, red, green) and explains the button functions for turning on/off, switching colors, and switching modes, along with the memory function.

7. Charging

The strobe light features a built-in rechargeable battery. Use the provided charging cable to recharge the device.

  • Charging Voltage: 5V
  • Charging Current: 1A
  • Charging Time: Approximately 90 minutes for a full charge.

Battery Life (Fully Charged):

  • Strobe Mode: Approximately 3 hours
  • Constant Light Mode: Approximately 1.5 hours
  • Slow Flashing Mode: Approximately 5 hours
Fast charging information, showing battery capacity, charging voltage, current, time, and usage times for different light modes.

Image: Details on fast charging, including battery capacity (250mAh), charging specifications (5V, 1A), charging time (90 minutes), and usage times for normal, flash, and slow flash modes.

8. Maintenance

  • Keep the device clean and free from dust and debris.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
  • Store the device in a dry place when not in use.
  • Use only the provided charging cable or a compatible 5V/1A charger.

9. Troubleshooting

  • Low Battery Reminder: If the green light blinks after you turn off the device, it indicates that the battery level is below 3.6V and requires charging.
  • Device Not Turning On: Ensure the device is fully charged. If it still doesn't turn on, try charging it for the recommended 90 minutes.
  • Light Modes Not Changing: Ensure you are pressing the button correctly (single press for color, double press for mode).

10. User Tips

  • This strobe light is particularly effective for enhancing visibility of DJI drones during night flights, making it easier to track and identify your drone's orientation.
  • The compact size and multiple attachment options make it versatile for various uses beyond drones, such as on bicycles or helmets for added safety.
  • Remember to fully charge the device before extended use to maximize operational time.

11. Warranty and Support

For any issues or support inquiries, please contact STARTRC customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.