1. Introduction
Thank you for choosing the DEKO 20V Cordless Electric Drill. This versatile power tool is designed for a wide range of home DIY and woodworking projects, offering precision and power for drilling and screw driving tasks. Please read this manual carefully before use to ensure safe and efficient operation.
2. Safety Information
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury.
- Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Electrical Safety: Avoid body contact with earthed or grounded surfaces (e.g., pipes, radiators, ranges, refrigerators). Do not expose power tools to rain or wet conditions.
- Personal Safety: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating for extended periods. Dress properly; avoid loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
- Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Battery Tool Use and Care: Recharge only with the charger specified by the manufacturer. Use power tools only with specifically designated battery packs.
3. Package Contents
The standard basic set (DKCD20FU-Li SET1) includes the following components:
- 1 x DKCD20FU-Li Drill/Driver
- 1 x 20V MAX* Lithium-Ion Battery
- 1 x Charger
- 1 x Packing Box
- 1 x User Manual

4. Product Overview
Familiarize yourself with the components of your DEKO 20V Cordless Electric Drill:

- 18+1 Torque Gear: For precise torque adjustments.
- 2-Speed Gear Switch: Select between low speed (0-350 RPM) for heavy-duty tasks and high speed (0-1350 RPM) for faster drilling.
- 10mm (3/8") Keyless Chuck: For quick and easy bit changes.
- LED Worklight: Illuminates the workspace for better visibility.
- Forward/Reverse Switch: Controls the direction of rotation.
- Battery Indicator: Displays the remaining battery charge.
- Battery Pack Release Button: For detaching the battery.
5. Specifications
| Feature | Specification |
|---|---|
| Model | DKCD20FU-Li |
| Voltage | 20 Volts |
| Color | Black & Yellow |
| Chuck Type | Keyless |
| Chuck Size | 3/8-inch (0.8-10mm) |
| No Load RPM | 0-350 / 0-1350 rpm |
| Rated Torque | 42 N.m |
| Clutch Settings | 18+1 |
| Applications | Drilling in Steel/ Wood/ Ceramic, Screw Driving |
| Max. Drilling Diameter | 10mm |
| Battery Charging Time | 2.5 Hours |
| Battery Charging Temperature | 10°C~40°C (50°F~104°F) |
| Item Dimensions (L*W*H) | 22*22*7.5 cm |
| Drill Weight | 1.2 kg |
| Power Source | DC |
| Rated Input Power | 400W |
| Frequency | 50-60Hz |
| Charger Adapter Input | 100-240V AC 50-60Hz |
| Charger Adapter Output | 21.5V DC 1500mAh |
| Battery Type | Lithium Ion |
| Switch Style | Push button |
| Handle Material | Rubber Overmolded |

6. Setup
6.1. Charging the Battery
- Ensure the battery pack is securely inserted into the charger.
- Plug the charger into a standard 100-240V AC, 50-60Hz power outlet.
- The battery indicator lights on the drill will show the charging status. A full charge takes approximately 2.5 hours.
- Once fully charged, disconnect the charger from the power outlet and remove the battery pack.
6.2. Installing/Removing Drill Bits
- To install a drill bit, rotate the keyless chuck counter-clockwise until the jaws are open wide enough to insert the bit.
- Insert the drill bit into the chuck, ensuring it is centered and fully seated.
- Rotate the chuck clockwise to tighten the jaws securely around the bit. Hand-tighten firmly.
- To remove a drill bit, rotate the chuck counter-clockwise until the jaws release the bit.

7. Operation
7.1. Selecting Speed
The drill features a 2-speed gear switch located on top of the tool. Use the lower speed (0-350 RPM) for high-torque applications like driving screws or drilling large holes. Use the higher speed (0-1350 RPM) for faster drilling in softer materials.

7.2. Adjusting Torque
The 18+1 torque gear allows for precise adjustments to prevent over-driving screws or damaging materials. Rotate the torque collar to select the desired setting. Lower values (1-18) are for screw driving, while the drill symbol is for drilling applications.

7.3. Forward/Reverse Operation
The forward/reverse switch is located above the trigger. Push it to the left for forward rotation (drilling/driving) and to the right for reverse rotation (removing screws/bits).
7.4. LED Worklight
The built-in LED worklight automatically activates when the trigger is pressed, illuminating your work area. The power LED lights (red, yellow, green) indicate different power conditions.

7.5. Applications
The DEKO 20V Cordless Drill is suitable for various tasks:

- Screw Driving: Use appropriate driver bits and torque settings.
- Drilling Wood: Select suitable wood drill bits and speed.
- Drilling Wall: Use masonry bits and appropriate speed/torque.
- Drilling Plastics: Use appropriate drill bits and lower speeds to prevent melting.
8. Maintenance
Regular maintenance ensures the longevity and optimal performance of your drill.
- Cleaning: Keep the ventilation slots of the tool clean to prevent overheating. Use a soft, damp cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners.
- Battery Care: Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. Do not store batteries in a discharged state for extended periods.
- Chuck Maintenance: Periodically clean the chuck jaws to ensure proper grip on bits.
- Storage: When not in use, store the drill and its accessories in the provided packing box in a dry, secure location out of reach of children.
9. Troubleshooting
- Drill not turning on: Check if the battery is fully charged and properly inserted. Ensure the forward/reverse switch is not in the center (locked) position.
- Battery not charging: Verify the charger is correctly plugged into a working power outlet and the battery is securely connected to the charger. Ensure the charging temperature is within the specified range (10°C~40°C).
- Bit slipping in chuck: Ensure the chuck is tightened firmly around the bit. Check if the bit shank is clean and free of debris.
- Reduced power/performance: The battery may be low on charge. Recharge the battery.
10. User Tips
- The lightweight design and ergonomic handle make this drill comfortable for extended use and working in confined spaces.
- The built-in LED worklight is very useful for illuminating dark work areas, making your tasks simpler and more convenient.
- Utilize the 18+1 torque settings to match the application, especially when driving screws, to avoid stripping screw heads or damaging the workpiece.
- For optimal battery life, avoid completely draining the battery before recharging.
11. Warranty & Support
DEKO offers a one-year warranty for this product. For technical support or warranty claims, please contact your retailer or the DEKO customer service. Keep your purchase receipt as proof of purchase.