1. Introduction
The Banggood ME-0378 Bicycle Chain Generator is an innovative device designed to convert kinetic energy from your bicycle's chain into electrical energy. This stored energy can then be used to charge various electronic devices via a standard USB output, ensuring your gadgets stay powered during your rides. It features a built-in 1000mAh lithium polymer battery for energy storage and includes multiple protection mechanisms for safe operation.
2. Package Contents
Please check the package carefully to ensure all items are present:
- 1 x Bicycle Chain Generator (with 150cm cable)
- 1 x Screw
- 1 x Installation Pad
- 8 x Cable Ties

Figure 2.1: Banggood Bicycle Chain Generator and included accessories.
3. Specifications
| Feature | Detail |
|---|---|
| Model | ME-0378 |
| Output Interface | USB female socket with protection |
| Output Voltage/Current | DC 5V / Max. 1000mA |
| Battery | 1000mAh / 7.4V Lithium Polymer Battery |
| Generation Capacity | Proportional to pedaling frequency and power output |
| Protection Features | Over-voltage, over-current, over-temperature, short circuit |
| Self-Discharge Rate | Less than 5% |
| Material | ABS + PC / POM / PA |
| Dimensions | 14.1 cm x 9.9 cm x 4.6 cm (5.55 in x 3.90 in x 1.81 in) |
| Weight | 252 g (8.89 oz) |
| Cable Length | 150 cm |
4. Setup
Follow these steps to properly install the bicycle chain generator on your bike:
- Choose Mounting Location: Select a suitable location on your bicycle frame, typically near the rear wheel and chain, where the generator can securely attach and engage with the chain without interfering with pedaling or other bike components.
- Attach Mounting Bracket: Use the provided screw and installation pad to securely fasten the generator's mounting bracket to your bike frame. Ensure it is tight and stable.

Figure 4.1: Front view of the generator with mounting clamp.
- Engage with Chain: Position the generator so that its internal gears make proper contact with the bicycle chain. The design allows the chain to drive the generator's mechanism.

Figure 4.2: Close-up of the mounting bracket and chain engagement.
- Secure Cables: Use the provided cable ties to neatly secure the USB output cable along your bike frame, preventing it from snagging or interfering with moving parts. Route the cable to a convenient location for device charging.
- Final Check: Before riding, gently spin the pedals to ensure the generator engages smoothly with the chain and there is no abnormal noise or resistance.

Figure 4.3: Generator mounted on a bicycle chain.
5. Operating Instructions
Using your bicycle chain generator to charge devices is straightforward:
- Connect Your Device: Plug your device's USB charging cable into the USB female socket of the generator. Ensure the protective cover is removed before plugging in and replaced after use to protect the port from elements.

Figure 5.1: USB output port detail.
- Start Pedaling: Begin riding your bicycle. The generator will start converting the mechanical energy from the chain into electrical energy, which is then stored in its internal 1000mAh lithium polymer battery.
- Charging Indication: Your connected device should indicate that it is charging. The charging speed is proportional to your pedaling frequency and power output.
- Emergency Light: The generator may also function as an emergency light, enhancing safety during dark rides.
6. Maintenance
To ensure the longevity and optimal performance of your bicycle chain generator, follow these maintenance guidelines:
- Regular Cleaning: Periodically clean the generator's exterior and the chain engagement area to remove dirt, dust, and grime that can accumulate during rides. Use a soft, damp cloth.
- Check Chain Engagement: Ensure the generator's gears are properly engaging with the bicycle chain. Misalignment can reduce efficiency and cause wear.
- Inspect Cables: Regularly check the USB cable for any signs of wear, fraying, or damage. Replace if necessary.
- Storage: When not in use for extended periods, store the generator in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: The internal lithium polymer battery has a low self-discharge rate (less than 5%). For best battery health, avoid completely draining the battery frequently.
7. Troubleshooting
If you encounter issues with your bicycle chain generator, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging | Loose USB connection Insufficient pedaling speed Generator not engaging chain Device cable faulty | Ensure USB cable is firmly connected. Increase pedaling speed for more power generation. Check generator alignment with the chain. Try a different USB cable or device. |
| Generator making unusual noise | Misalignment with chain Debris in mechanism | Re-align the generator to ensure smooth chain engagement. Clean the generator's chain engagement area. |
| Generator feels stiff or adds resistance | Incorrect installation Internal issue | Review installation steps to ensure proper mounting and chain engagement. If problem persists, contact support. |
| Emergency light not working | Battery low Internal fault | Ensure the internal battery has sufficient charge. Contact support if the issue continues. |
8. User Tips
- Optimal Charging: For best charging performance, maintain a consistent and moderate pedaling speed. Higher speeds generally lead to faster charging.
- Pre-charge Devices: While the generator is excellent for topping up, for critical power needs, ensure your devices are pre-charged before long rides.
- Weather Protection: Although designed for outdoor use, avoid prolonged exposure to heavy rain or submerging the device. The USB port has a protective cover; ensure it's in place when not charging.
- Versatile Charging: This generator is compatible with a wide range of USB-powered devices, including smartphones (iPhone, Samsung, HTC), MP3/MP4 players, and small flashlights.
9. Warranty and Support
For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.