1. Introduction
Thank you for choosing the BAOFENG H198 Car Dash Cam. This device is designed to provide reliable video recording while driving, offering features such as Full HD recording, night vision, and a rotatable screen for optimal viewing. This manual will guide you through the installation, operation, and maintenance of your new dash cam.

2. Package Contents
Please check the box for the following items:
- 1 x H198 Car DVR Unit
- 1 x Suction Cup Mount
- 1 x USB Cable
- 1 x Car Charger (12-24V input)
- 1 x Rechargeable Li-ion Battery
- 1 x User Manual (this document)
Note: A MicroTF (SD) memory card (up to 32GB) is required for recording and may or may not be included depending on your purchase option.

3. Key Features
- Display: 2.5-inch TFT Colorful LCD screen with 270-degree rotation.
- Video Resolution: 640*480 (supports 1080P Full-HD recording).
- Camera: 1/4 color CMOS Image Sensor with 6 IR LEDs for night vision.
- Viewing Angle: 90 degrees (120 degrees wide angle mentioned in features).
- Recording: Automatic recording upon car power-up, high-speed recording, cycled recording, and repeat storage by section.
- Storage: Supports MicroTF (SD) cards up to 32GB (not included).
- Special Functions: G-sensor, Motion Detection, Real Time & Date display on video, Quick Snap, Quick Video Recording, Quick Review.
- Power: DC 5V, Car charger input 12-24V.
- Interface: USB 2.0.
- Battery: Rechargeable Li-ion Battery (removable).
4. Technical Specifications
| Feature | Specification |
|---|---|
| Model | H198 |
| Display | 2.5 inches TFT Colorful LCD |
| Screen Rotation Angle | 270 degrees |
| Video Resolution | 640*480 (Supports 1080P Full-HD) |
| Image Sensor | 1/4 color CMOS Image Sensor |
| IR LEDs | 6 pieces |
| Viewing Angle | 90 degrees (120° wide angle) |
| Video Format | AVI |
| Still Image Format | JPEG |
| Memory Card Type | MicroTF (SD) |
| Max External Memory | 32GB (card not included) |
| Chipset | STK |
| Special Features | G-sensor, Motion Detection, Cycle Recording, Time&Date Display |
| Power Input | DC 5V |
| Car Charger Input | 12-24V |
| Interface | USB 2.0 |
| Battery | Rechargeable Li-ion Battery (Removable) |
| Product Dimensions (folded) | 106 x 62 x 33 mm |
| Product Weight | 96g |
5. Setup and Installation
5.1 Inserting the Memory Card
- Locate the MicroTF (SD) card slot on the side of the dash cam.
- Gently insert the memory card into the slot until it clicks into place. Ensure the card is oriented correctly.


5.2 Installing the Battery
- Open the battery compartment cover on the back of the dash cam.
- Insert the rechargeable Li-ion battery, ensuring the contacts align correctly.
- Close the battery compartment cover.

5.3 Mounting the Dash Cam
- Attach the suction cup mount to the dash cam.
- Clean the desired area on your windshield.
- Press the suction cup firmly against the windshield and flip the lever to secure it.
- Adjust the dash cam's position and screen angle (up to 270 degrees) for optimal viewing and recording.

5.4 Power Connection
- Connect the car charger to the dash cam's power input port.
- Plug the other end of the car charger into your vehicle's 12-24V power outlet (cigarette lighter socket).
6. Operation
6.1 Powering On/Off
- The dash cam will automatically power on and begin recording when your vehicle's power is supplied (e.g., when you start the engine).
- It will automatically power off when the vehicle's power is cut.
- To manually power on/off, press and hold the power button (usually located on the side or top of the unit).
6.2 Recording Modes
- Continuous Loop Recording: The dash cam records video in segments (e.g., 1, 3, or 5 minutes). When the memory card is full, it automatically overwrites the oldest unlocked footage.
- G-Sensor (Emergency Recording): In the event of a sudden impact or collision, the built-in G-sensor will detect it and automatically lock the current video segment, preventing it from being overwritten.
- Motion Detection: When enabled, the dash cam will start recording automatically if it detects motion in front of the vehicle while parked. This feature requires continuous power supply (e.g., hardwiring kit, not included).
- Night Vision: The 6 IR LEDs enhance recording quality in low-light conditions.
6.3 Menu Navigation
Use the 'MENU', 'DOWN', 'UP', and 'MODE' buttons located below the screen to navigate through settings and modes.

- MENU Button: Access the settings menu.
- UP/DOWN Buttons: Navigate through menu options or adjust values.
- MODE Button: Switch between video recording, photo mode, and playback mode.
6.4 Date and Time Setting
It is crucial to set the correct date and time for accurate video timestamps. Access the settings menu using the 'MENU' button and navigate to the 'Date/Time' option to adjust.
6.5 Playback and Review
In playback mode (selected via the 'MODE' button), you can review recorded videos and photos directly on the 2.5-inch TFT LCD screen.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the dash cam body. For the lens, use a specialized lens cleaning cloth to avoid scratches. Do not use harsh chemicals or abrasive cleaners.
- Temperature: Avoid exposing the dash cam to extreme temperatures (hot or cold) for extended periods, as this can damage the battery and internal components.
- Memory Card: Periodically format your MicroTF card (at least once a month) to ensure optimal performance and prevent data corruption. Back up any important footage before formatting.
- Battery Care: If the dash cam will not be used for a long time, fully charge the battery and store the device in a cool, dry place.
8. Troubleshooting
- Dash cam does not power on:
- Ensure the car charger is properly connected and the vehicle's power outlet is functioning. Check if the battery is inserted correctly and charged. Try pressing the power button manually.
- Recording stops unexpectedly:
- Check if the memory card is full or corrupted. Format the memory card. Ensure the card is a high-speed class 10 or higher. Check power connection for interruptions.
- Video quality is poor:
- Clean the camera lens. Ensure the protective film has been removed from the lens. Check video resolution settings in the menu. Adjust the screen rotation angle for better view.
- Buttons are unresponsive:
- Try resetting the device (if a reset button is available, use a thin object to press it, otherwise, disconnect power and remove/reinsert battery). Ensure the device is not frozen due to a software issue.
- Date and time are incorrect:
- Access the settings menu and manually set the correct date and time. Ensure the internal battery (if applicable) is holding a charge to retain settings.
9. User Tips
- For optimal recording, ensure your MicroTF card is a reputable brand and rated Class 10 or higher.
- Regularly check the dash cam's position to ensure it has a clear view of the road and is not obstructed by wipers or other objects.
- Consider using a hardwire kit (sold separately) for continuous power to enable parking monitor features without draining your car's battery.
10. Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or further inquiries, please reach out to the seller or manufacturer's customer service.