HIROYASU IC-980 Pro

Contents

HIROYASU IC-980 Pro Mini Mobile Radio Instruction Manual

Model: IC-980 Pro | Brand: HIROYASU

Introduction

The HIROYASU IC-980 Pro is a compact and powerful UHF/VHF dual-band mini mobile radio designed for reliable two-way communication. Featuring 25W output power, AI noise reduction, FM radio, scrambler, and VOX functions, this transceiver is suitable for various mobile applications. This manual provides essential information for setting up, operating, and maintaining your IC-980 Pro radio.

Package Contents

Please check the box for the following items:

  • 1 × IC-980 Pro Mini Radio Body
  • 1 × Speaker Microphone (HM-18)
  • 1 × Mounting Bracket
  • 1 × Cigarette Lighter Power Cable
  • 1 × Screw Sets
  • 1 × Hook for Speaker Microphone
  • 1 × English User Manual

Unboxing and Initial Setup Video:

This video demonstrates the unboxing and initial connection of the radio components.

Setup

1. Connecting Power

Connect the provided Cigarette Lighter Power Cable to the DC port on the rear of the radio. Ensure the connection is secure. The radio operates on a 13.8V DC power supply.

Rear view of HIROYASU IC-980 Pro showing power and antenna ports

Rear view of the radio with power and antenna connections.

2. Connecting the Speaker Microphone

Plug the RJ45 connector of the Speaker Microphone into the microphone connector on the front panel of the radio.

Hand holding speaker microphone connected to the radio

Speaker microphone connected to the radio.

3. Antenna Connection

Connect a suitable antenna (not included) to the antenna port on the rear of the radio. Ensure the antenna is rated for the VHF (136-174MHz) and UHF (400-470MHz) frequency ranges to prevent damage to the transceiver.

4. Mounting the Radio

Use the provided mounting bracket and screw sets to securely install the radio in your desired location, such as a vehicle dashboard. Ensure adequate ventilation around the unit.

HIROYASU IC-980 Pro mounted in a car dashboard

Radio mounted in a vehicle dashboard.

5. Programming the Radio

The IC-980 Pro can be programmed using a USB-C cable (original Android USB-C cable can be used) and dedicated programming software. Contact the seller to obtain the programming software and a detailed user manual if needed.

USB-C port for programming the radio

USB-C port for programming.

Operating Instructions

Front Panel Controls

Diagram of front panel controls with numbered labels

Front panel controls:

  1. Power On/Off Volume knob
  2. V/M Switch (Frequency/Channel mode)
  3. Channel +/- and Enter
  4. FM (Broadcast Radio)
  5. Display screen
  6. Menu
  7. Exit/Back
  8. PTT (Push-to-Talk)
  9. Microphone connector

Rear Panel Ports

Diagram of rear panel ports with numbered labels

Rear panel ports:

  1. Antenna connector
  2. Cooling Fan
  3. Program port (USB-C)
  4. DC power port
  5. External speaker port

Basic Operation

  • Power On/Off: Rotate the Power On/Off Volume knob (1) clockwise to turn on the radio. Rotate counter-clockwise to turn off.
  • Volume Adjustment: Rotate the Power On/Off Volume knob (1) to adjust the audio volume.
  • Frequency/Channel Mode (VFO/MR): Press the V/M button (2) to switch between VFO (Frequency) mode and MR (Memory Channel) mode.
  • Frequency/Channel Selection: In VFO mode, use the Channel +/- and Enter knob (3) or the microphone's numeric keypad to input frequencies. In MR mode, use the knob to select stored channels.
  • Menu Access: Press the MENU button (6) to enter the main menu. Use the Channel +/- and Enter knob (3) or microphone's Up/Down keys to navigate, and the Enter button (3) or microphone's # key to confirm. Press EXIT (7) or microphone's EXIT key to exit the menu.

Key Features and Functions

  • FM Broadcast Radio (76-108MHz Rx): To turn the commercial FM radio ON, press the "FUN" key on the microphone momentarily, then press Numeric key "7". Repeat the procedure to turn the FM radio OFF.
  • 1750Hz Tone: This transceiver includes a 1750Hz Tone module for repeater access in the E.U. (available in production batches from April 19 onwards).
  • AI Noise Reduction (Denoise): The radio features AI noise reduction to improve audio clarity. This can be toggled On/Off in the menu (Menu -> SET -> Denoise).
  • AI Noise Reduction feature in action

    AI Noise Reduction for clear communication.

  • Dual Watch: The radio supports dual watch functionality, allowing monitoring of two frequencies simultaneously. This can be enabled/disabled in the menu (Menu -> SET -> Double Watch).
  • VOX (Voice-activated transmission): Enables hands-free transmission when voice is detected.
  • Scrambler & Compandor: Enhance privacy and audio quality.
  • Busy Channel Lock (BCL): Prevents transmission on an occupied channel.
  • TOT (Time-Out Timer) & TOA (Time-Out Alarm): Prevent excessively long transmissions.
  • Repeater SFT-D & SFT Frequency: Settings for repeater operation.
  • CTCSS/DCS and Special DCS: Sub-audible tones for selective calling.
  • Output Power: High (25W) and Low (10W) power settings are switchable.
  • Display Mode: Choose between Frequency, Channel, or MR (Memory Recall) display modes.
  • Roger Beep: An audible tone indicating the end of a transmission.
  • Keypad Lock: Prevents accidental key presses.
  • Priority Channel Scan: Allows scanning of a designated priority channel.

Maintenance

General Care

  • Keep the radio clean and dry. Avoid exposure to dust, moisture, and extreme temperatures.
  • Do not use harsh chemicals or solvents for cleaning. Use a soft, damp cloth.
  • Ensure all connections are secure before operation.

Cooling Fan

The built-in cooling fan operates intelligently. It activates when the RF power amplifier's radiator reaches a certain high temperature, even during reception, to prevent overheating.

Rear view of radio with cooling fan and dimensions

Rear view showing the cooling fan.

Warning: High-temperature surface, do not touch after long-term use!

Troubleshooting

  • FM Broadcast Radio Station not turning ON: Press the "FUN" key on the microphone momentarily, then press Numeric key "7" subsequently to turn the Commercial FM Radio ON. Repeat the procedure to turn FM radio off.
  • Saving a Memory Channel:
    1. Press the V/M button on the front panel to switch your radio to VFO Mode.
    2. Input the desired frequency using the numeric keypad on the microphone.
    3. Press the "FUN" key on the microphone momentarily, then press Numeric key "0". Use the "Up" or "Down" keys on the microphone to select your desired channel number. The LCD will display "Cover->001" if the channel is occupied, or "SAVE->234" if it's empty.
    4. Press the "FUN" key on the microphone to save the frequency to the channel. "OK" will be displayed upon successful storage.
    5. You can recall the memory channel in MR (Memory Channel) mode.
  • Programming Software and User Manual: If you need the programming software or a detailed user manual, send an email to the seller via your order message. They typically respond quickly.
  • Cannot program specific frequencies (e.g., 446.168): Ensure the radio is in VFO mode and the frequency step (Sep) is correctly set in the menu to accommodate the desired frequency. If issues persist, consult the detailed user manual or programming software.
  • Chinese text on radio screen: The language setting can be changed in the menu (Menu -> SET -> Language). Select "English" to switch the display language.
  • Radio not working on CB band (27 MHz): This transceiver is designed for VHF (136-174MHz) and UHF (400-470MHz) bands and does not operate on the CB band.

Specifications

CategoryParameterValue
GeneralFrequency RangeFM: 76-108MHz (Rx), VHF: 136-174MHz (Tx&Rx), UHF: 400-470MHz (Tx&Rx)
Memory Channel200
Frequency Step2.5/5/6.25/10/12.5/20/25/30/50KHz
Working Voltage13.8V±15%
Squelch ModeCarrier/CTCSS/DCS
Frequency Stability±2.5ppm
Working Temperature-20°C to 60°C
Dimensions108mm*40mm*102mm
Weight450g
ReceiverSensitivity (12dB SINAD)Wide Band: ≥0.2uV, Narrow Band: ≥0.14uV
Adjacent Channel SelectivityWide Band: ≥70dB, Narrow Band: ≥60dB
Inter-modulationWide Band: ≥65dB, Narrow Band: ≥60dB
Spurious ResponseWide Band: ≥70dB, Narrow Band: ≥70dB
Signal to Noise RatioWide Band: ≥45dB, Narrow Band: ≥45dB
Audio Distortion≤5%
Audio Power≥2W±10%
Waterproof / Water-ResistantNo
TransmissionOutput PowerH: 25/20W (VHF/UHF), L: 10W/8W (VHF/UHF)
ModulationWide Band: 16KΦF3E, Narrow Band: 11KΦF3E
Adjacent Ch. PowerWide Band: ≥70dB, Narrow Band: ≥60dB
Signal to Noise RatioWide Band: ≥40dB, Narrow Band: ≥40dB
Parasitics and HarmonicsWide Band: ≥60dB, Narrow Band: ≥60dB
Audio Distortion≤5%

Note: Specifications are subject to change without notice due to technical improvement.

User Tips

  • Antenna Compatibility: The radio does not come with an antenna. You will need to purchase a suitable antenna separately that is compatible with VHF/UHF frequencies and has the correct connector type.
  • Programming Software: For advanced customization and channel naming, contact the seller to request the programming software and cable. Many users report quick delivery of these resources.
  • Firmware Updates: While the manual doesn't explicitly state firmware update procedures, it's generally recommended to check with the seller for any available updates to improve performance or add features.
  • Maritime Frequencies: The radio operates within standard VHF/UHF ranges. For maritime use, ensure the specific frequencies are within the radio's capabilities and comply with local regulations.

Warranty and Support

For any technical support, warranty claims, or to obtain programming software and detailed user manuals, please contact the seller directly through your order message. They are typically responsive and can provide the necessary assistance.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.