1. Introduction
The JIKONG BMS 15A Active Balancer is a sophisticated battery management system designed for various battery chemistries, including Li-ion, LiFePo4, and LTO. It supports battery configurations from 2S to 24S and provides an active balancing current of 15A to ensure optimal cell health and longevity. This manual provides essential information for the safe and effective installation, operation, and maintenance of your JIKONG Active Balancer.
2. Package Contents
Upon opening your JIKONG Active Balancer kit, please verify that all components are present and in good condition. The kit typically includes:
- JIKONG Active Balancer Unit
- Connection Cables (red wires with white connectors)
- Adapter Board
- Crocodile Clip Cables (green braided cables with red clips)
Video: Unboxing and contents of the JIKONG Active Balancer kit.

Image: JIKONG BMS 15A Active Balancer kit in protective case.

Image: JIKONG Smart 15A Balancer unit with connectors.

Image: Included cables for connection.

Image: Adapter board for cell connections.

Image: Crocodile clip cables for battery connections.
3. Setup and Wiring
Proper wiring is critical for the safe and effective operation of the JIKONG Active Balancer. Always ensure the battery pack is disconnected from any load or charging source before beginning installation.
3.1 General Wiring Principles
- Connect the balance wires from your battery cells to the provided adapter board. Ensure correct polarity and sequence (B-, B1, B2, ..., Bn+).
- Connect the adapter board to the corresponding port on the JIKONG Active Balancer unit.
- For models requiring an external power supply, connect a 40-100V DC supply to the designated input terminals, following the specific wiring diagram for your model.
- For cascading multiple balancers, refer to the specific cascading wiring diagrams.
3.2 Wiring Diagrams by Model
Refer to the following diagrams for detailed wiring instructions specific to your JIKONG Active Balancer model and battery configuration:

Image: Wiring Diagram for JK-B1A24S / JK-B2A24S (24S, 20S, DC-DC Booster methods).

Image: Wiring Diagram for JK-B10A24S (24S, 20S, DC-DC Booster methods).

Image: Wiring Diagram for JK-B10A24S (Cascade, 4S, RS485 methods).

Image: Wiring Diagram for JK-B1A16S / JK-B2A16S (13S, 16S, DC-DC Booster methods).

Image: Wiring Diagram for JK-B1A24S / JK-B2A24S (Outer Power Supply, Cascading methods).

Image: Wiring Diagram for JK-B1A16S / JK-B2A16S (Outer Power Supply, Cascading methods).

Image: Wiring Diagram for JK-B5A24S (24S, 20S, DC-DC Booster methods).

Image: Wiring Diagram for JK-B5A24S (Cascade method).
4. Operating Instructions
4.1 Powering On/Off
The JIKONG Active Balancer typically features a single power button for simple operation. Press the button to power on the device. The status indicator light will illuminate.
4.2 Bluetooth App Control
The JIKONG Active Balancer includes Bluetooth functionality for monitoring and configuration via a mobile application. This allows for real-time data viewing and parameter adjustments.
- Download the official JIKONG BMS mobile application from your device's app store.
- Ensure Bluetooth is enabled on your mobile device.
- Open the JIKONG BMS app and search for available devices. Select your balancer to connect.
- Once connected, you can monitor individual cell voltages, overall battery voltage, and active balancing current.
- Navigate to the 'Settings' section within the app to adjust parameters such as:
- Cell Count
- Balance Trigger Voltage
- Calibrating Voltage
- Start Balance Voltage
- Max Balance Current
- The app supports bilingual switching between English and Chinese for user convenience.

Image: Screenshot of Bluetooth link part of mobile APP - Status screen showing cell voltages and balance current.

Image: Screenshot of Bluetooth link part of mobile APP - Settings screen showing basic and advanced settings.

Image: Bilingual switching between English and Chinese in Bluetooth communication.
5. Maintenance
To ensure the longevity and reliable performance of your JIKONG Active Balancer, follow these maintenance guidelines:
- Keep the device clean and dry. Avoid exposure to moisture, dust, and corrosive substances.
- Regularly inspect all wiring connections for tightness and signs of wear or damage.
- Operate the device within its specified temperature range (-30 to 70 °C).
- Avoid physical impact or dropping the device.
6. Troubleshooting
If you encounter issues with your JIKONG Active Balancer, consider the following common troubleshooting steps:
- Device not powering on: Check the supply voltage to ensure it is within the 9-100V range. Verify all power connections are secure.
- Balancing not occurring: Double-check all balance wiring connections to the adapter board and the balancer unit. Ensure the balance parameters in the mobile app (e.g., Start Balance Voltage, Balance Trigger Differential Pressure) are set appropriately for your battery type and desired operation.
- Bluetooth connection issues: Ensure the balancer is powered on and within range of your mobile device. Restart both the balancer and your mobile device, then try reconnecting.
- Inaccurate readings: If cell voltage readings appear incorrect, verify the wiring sequence and ensure all balance wires are properly connected. Consider recalibrating if an option is available in the app.
7. Specifications
The JIKONG BMS 15A Active Balancer offers robust performance and features:
| Feature | Specification |
|---|---|
| Accessory Type | Battery Accessories |
| Brand Name | SMART JKBMS |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
| Extra Function | BT (Bluetooth) |
| Supply Voltage | 9-100 V |
| Operating Power Consumption | ≤ 1500 mW |
| Operating Temperature | -30 to 70 °C |
| Maximum Balancing Current | 15 A |
| Active Equalizer Size | 168.5 x 169.5 x 53 mm |
| Finished Weight | 1140 g |
| Battery String Support | 2S-24S |
| Battery Type Support | Li-ion, LiFePo4, LTO |
7.1 Default Parameters
| Parameter | Li-ion | LiFePO4 | LTO | Unit |
|---|---|---|---|---|
| Balancing Initial Voltage | 3 | 3 | 2 | V |
| Maximum Balancing Current | 15 | 15 | 15 | A |
| Unit Overcharge Voltage | 4.2 | 3.6 | 2.7 | V |
| Trigger Balancing Differential Pressure | 0.01 | 0.01 | 0.01 | V |
| Device Address | 1 | 1 | 1 | / |

Image: Product certification: RoHS, FCC, CE.
8. User Tips
- Always ensure your battery pack is fully charged and balanced before putting it into service to maximize performance and lifespan.
- Regularly check the cell voltages via the mobile app to monitor the health of your battery pack.
- When connecting, always connect the B- (negative) wire first, then proceed with B1, B2, and so on, up to the highest cell voltage. Disconnect in reverse order.
- The JIKONG Active Balancer is compatible with Li-ion, LiFePo4, and LTO battery types. Ensure your settings in the app match your battery chemistry.
9. Warranty and Support
The JIKONG BMS 15A Active Balancer is certified with CE, FCC, and RoHS standards, indicating compliance with relevant safety and environmental regulations.
For specific warranty information, technical support, or service inquiries, please contact the manufacturer or your point of purchase. Keep your purchase receipt or order details handy when contacting support.