Lepmerk HT627

Contents

HT627 Multi-Field EMF Meter User Manual

Your guide to understanding and operating your electromagnetic field detector.

1. Introduction and Product Overview

The HT627 Multi-Field EMF Meter is a portable health and safety field detector designed to measure AC magnetic fields, electric fields, and high-frequency (RF) radiation. It is primarily used to detect and evaluate the impact of non-ionizing electromagnetic fields, magnetic fields, and high-frequency radiation in both living and working environments.

This device features a high-precision sensor and a micro-controlled chip processor for quick and accurate measurements. Its user-friendly design includes a high-definition LCD display with a three-color backlight warning system, multiple measurement modes, a buzzer alarm, and an automatic shutdown function for energy saving.

HT627 Multi-Field EMF Meter highlighting key features
HT627 Multi-Field EMF Meter with its key features: high-definition LCD display, multiple measurement modes, three-color backlight warning, and automatic shutdown.

Key Features:

  • 3-in-1 Design: Detects AC magnetic field, electric field, and high-frequency (RF) radiation.
  • High-Precision Sensor: Ensures accurate and fast measurement of electromagnetic radiation values.
  • Digital Display & Automatic Alarm: Clear backlit LCD screen with sound and light alarms for exceeding thresholds.
  • Unit Switching: Easily switch between mG and uT for magnetic field intensity, and V/m for electric field, mW/m² for RF.
  • Automatic Shutdown: Powers off after approximately 15 minutes of inactivity to conserve battery.
  • Wide Applications: Suitable for household appliances, power distribution rooms, high-voltage towers, electric vehicles, radio equipment, and 5G signals.

2. Safety Information

Please read this manual carefully before using the HT627 EMF Meter to ensure safe and proper operation. Keep this manual for future reference.

General Safety Precautions:

  • Do not attempt to modify or disassemble the device.
  • Keep the device away from water and extreme temperatures.
  • Ensure batteries are inserted correctly according to polarity markings.
  • Replace batteries when the low battery indicator appears to maintain measurement accuracy.

Understanding Radiation:

Electromagnetic radiation is present in our daily environment from various sources. While this device helps detect these fields, it is important to understand the potential impact.

Image illustrating the harm of radiation to pregnant women
Radiation can affect the body's circulatory system, immune system, reproductive system, and metabolic functions. It can weaken the immune system during pregnancy and lead to severe developmental abnormalities in fetuses or newborns. Care for your family's health and stay away from radiation.
Bar chart showing relative radiation levels from common household items
Everywhere in our living environment is filled with radiation. In everyday life, there are many sources of radiation such as microwave ovens, electric fans, and air conditioners that emit radiation. This chart shows relative radiation levels from a Computer (Mid), Tablet computer (General), TV set (General), Microwave oven (Severe), Refrigerator (Mid), and Hair drier (Mid).

3. Product Components and Layout

Familiarize yourself with the different parts of your HT627 EMF Meter:

Diagram of the HT627 EMF Meter instrument panel with labeled parts
Instrument Panel Diagram:
1. Radio Frequency (RF) Receiving Antenna
2. Magnetic Field Receiving Antenna
3. Operational Dynamic Area
4. Display Screen
5. Electric Field Receiving Antenna
6. Power Switch Key (⑂)
7. Data Hold Key (HOLD)
8. Function Selection Key (FUNC)
9. Alarm Audio Switch Key (♫/♪)
10. MAX Data Key (MAX)
Six-sided view of the HT627 EMF Meter showing sensors and battery compartment
A six-sided product showcase revealing the Electric Field Sensor, RF/Microwave Antenna, Magnetic Field Sensor, and the battery compartment on the back. The back also shows compliance with EN61010-1 and EN61326-1 standards, and battery type: DC1.5V x 3 AAA.

4. Setup

Battery Installation:

  1. Locate the battery compartment on the back of the device.
  2. Open the battery compartment cover.
  3. Insert three (3) 1.5V AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery compartment cover securely.

Note: Batteries are not included with the product.

5. Operating Instructions

Power On/Off:

  • Press the Power Switch Key (⑂) to turn the device on.
  • Press and hold the Power Switch Key (⑂) to turn the device off.

Selecting Measurement Modes:

The HT627 supports multiple measurement modes for different types of radiation.

Diagram showing the FUNC button for switching measurement modes
Press the "FUNC" button to switch between magnetic field measurement (uT), magnetic field measurement (mG), electric field measurement (V/m), and high-frequency measurement (mW/m²).

Data Hold Function:

To freeze the current reading on the display:

Diagram showing the HOLD button for data hold function
During the measurement process, press the "HOLD" button to enable or disable the display lock function.

Maximum Value Measurement:

To capture and display the maximum measured value:

Diagram showing the MAX button for maximum value measurement
During the measurement process, press the "MAX" key to enable maximum value memory. Pressing the "MAX" key again will return to normal measurement mode.

Alarm Audio On/Off:

You can toggle the audible alarm:

Diagram showing the Alarm Audio Switch Key
During the measurement process, press the Alarm Audio Switch Key (♫/♪) to turn the alarm audio on or off.

Three-Color Backlight Warning:

The device provides visual alerts based on the detected radiation level:

Image showing three backlight colors for different radiation levels
After powering on and selecting the desired detection function, the device will display different backlight colors (green, orange, red) based on the magnitude of the measured value to alert the user.

Automatic Shutdown Function:

The device is set to automatically power off after approximately 15 minutes of no button operation. To manage this feature:

Diagram explaining how to enable/disable auto power off
To disable the auto power off function, press and hold the "HOLD" key, then press the "Power Switch Key" (⑂) while keeping the "HOLD" key pressed. Release the "HOLD" key when the "⑂" symbol disappears from the display screen. The auto power off function will be turned off. If the instrument is powered off and then powered on again, the auto power off function will be restored.

6. Maintenance

Cleaning:

  • Wipe the device with a soft, dry cloth.
  • Do not use abrasive cleaners or solvents.

Storage:

  • Store the device in a cool, dry place away from direct sunlight.
  • If storing for an extended period, remove the batteries to prevent leakage.

Battery Replacement:

When the low battery indicator appears on the display, replace all three AAA batteries with new ones to ensure accurate readings and proper device function. Refer to the "Battery Installation" section for instructions.

7. Troubleshooting

  • Device does not power on: Check if batteries are installed correctly and are not depleted. Replace if necessary.
  • Inaccurate or fluctuating readings: Ensure you are holding the device steadily and away from other electronic devices that might cause interference. Verify the correct measurement mode is selected for the type of radiation you are trying to detect.
  • Display is dim or unresponsive: Replace batteries. If the issue persists, contact customer support.

8. Specifications

Detailed technical specifications for the HT627 Multi-Field EMF Meter:

Table of HT627 Multi-Field EMF Meter product parameters and specifications
Product Parameter Table
FunctionSpecifications
Magnetic FieldMeasuring Range: 0.01~200.0 uT / 0.1~2000 mG
Resolution: 0.01 / 0.1 uT; 0.1 / 1 mG
Frequency Range: 30~1000 Hz
Axis: 3-axis
Electric FieldMeasuring Range: 1~2000 V/m
Resolution: 1 V/m
Frequency Range: 30~1000 Hz
RF (Radio Frequency)Measuring Range: 0.001~100.0 mW/m²
Resolution: 0.001 / 0.01 / 0.1 mW/m²
Frequency Range: 50 MHz~3.5 GHz
AlarmSound and light (green, orange, red) alarm exceeding built-in threshold
Auto Power OffApprox. 15 minutes
Use Environment0~40°C / 40~80% RH
Power Supply3 x 1.5V AAA batteries (Batteries are not included)
Product Size140 x 57 x 27 mm (5.51 x 2.24 x 1.06 inches)
Product Weight124 g (4.37 oz)
Safety RatingEN61326-1

9. User Tips

  • Optimal Placement: For best results, hold the meter at arm's length and move it slowly around the area you are testing. Radiation fields can vary significantly over short distances.
  • Interference: Be aware that other electronic devices nearby can influence readings. Try to test in an environment with minimal other active electronics if you are looking for specific sources.
  • Understanding Readings: Familiarize yourself with typical background radiation levels in your area to better interpret elevated readings. The three-color backlight provides a quick visual cue for general safety levels.

10. Warranty and Support

For warranty information, technical support, or any questions regarding your HT627 Multi-Field EMF Meter, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Product packaging showing the HT627 EMF Meter, carrying bag, and user manual
The HT627 Multi-Field EMF Meter comes with a protective bag and a user manual.

© 2023 Lepmerk. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.