DollarFix PF8

Contents

DollarFix PF8 Professional OBD2 Auto Diagnostic Tool User Manual

Full System Diagnosis, 34 Reset Functions, Key Programming, ECU Coding, Bi-Directional Control

1. Introduction

The DollarFix PF8 is a professional OBD2 auto diagnostic tool designed for comprehensive vehicle analysis. This device offers OE-level full system diagnosis, over 34 maintenance service functions, advanced ECU coding, and key programming capabilities. It features bi-directional control for active testing and supports a wide range of vehicles manufactured since 1996. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your DollarFix PF8 diagnostic tool.

2. Safety Information

  • Always perform automotive testing in a safe environment.
  • Wear safety eye protection that meets ANSI standards.
  • Keep clothing, hair, hands, tools, test equipment, etc., away from all moving or hot engine parts.
  • Operate the vehicle in a well-ventilated work area; exhaust gases are poisonous.
  • Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.
  • Use extreme caution when working around the ignition coil, distributor cap, ignition wires, and spark plugs. These components create hazardous voltages when the engine is running.
  • Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
  • Do not connect or disconnect any test equipment while the ignition is on or the engine is running.

3. Package Contents

The DollarFix PF8 package includes the following items:

Packing list for DollarFix PF8, showing the main unit, VCI connector, various cables and adapters, fuses, and documentation.
Figure 1: DollarFix PF8 Packing List
  • DollarFix PF8 Main Unit (1 PC)
  • VCI Diagnostic Connector (1 PC)
  • Clipper Cable (LCPSS) (1 PC)
  • Cigarette Lighter Cord (1 PC)
  • Fuses (AC250V/5A, 4 PCS)
  • Fuses (AC250V/5A, 2 PCS)
  • Various Connectors: BMW-20, BZ-38, TA-22, CR-6, TA-17, HA-3, G/A-12, M/H-12+16, FT-3, NN-14+16 (1 PC each)
  • Diagnostic Extension Cable (1 PC)
  • OBD Adapter (1 PC)
  • Charging Cable (1 PC)
  • 3-in-1 Charger (matched with US, UK, and European plugs) (1 PC)
  • User Manual (1 PC)
  • Packing List (1 PC)

4. Product Overview

The DollarFix PF8 is a robust and intelligent diagnostic tablet designed for automotive professionals. It features an 8-inch HD touchscreen with 1280x800 resolution, powered by an Android 8.1 system with a 4-core 1.5GHz CPU, 2GB RAM, and 64GB storage. The device includes an 8MP rear camera and is equipped with a 12600mAh battery for extended operation. Connectivity options include Bluetooth and Wi-Fi for updates and communication.

DollarFix PF8 diagnostic tool showing its 8-inch screen with menu options like Update, Settings, Module, Feedback, Intelligent Diagnosis, TPMS, File, Maintenance, Remote Assistance, and Instruction.
Figure 2: DollarFix PF8 Main Unit Interface
Diagram highlighting the hardware specifications of the DollarFix PF8, including 8-inch HD touchscreen, 1280x800 resolution, Android 8.1, 2GB RAM, 64GB storage, 12600mAh battery, 4-core 1.5GHz CPU, Wireless Bluetooth, and 2 years of free updates.
Figure 3: DollarFix PF8 Hardware Overview

5. Setup

5.1 Initial Power On

  1. Ensure the device is fully charged using the provided charging cable and 3-in-1 charger.
  2. Press and hold the power button located on the side of the device until the screen lights up.
  3. Follow the on-screen prompts to complete the initial setup, including language selection and Wi-Fi connection.

5.2 Connecting to the Vehicle

  1. Locate the vehicle's OBD-II port, usually under the dashboard on the driver's side.
  2. Connect the VCI Diagnostic Connector to the vehicle's OBD-II port. For some vehicles, specific adapters (e.g., BMW-20, BZ-38) or the Diagnostic Extension Cable may be required.
  3. Connect the other end of the VCI Diagnostic Connector to the DollarFix PF8 main unit via Bluetooth. Ensure Bluetooth is enabled on both devices.
  4. Turn the vehicle's ignition to the ON position (engine off).

5.3 Software Updates

The DollarFix PF8 comes with 2 years of free software updates. It is recommended to regularly update the software to ensure compatibility with the latest vehicle models and access to new features.

  1. Connect the device to a stable Wi-Fi network.
  2. From the main menu, tap on the "Update" icon.
  3. Select the available updates and follow the on-screen instructions to download and install them.

6. Operating Instructions

6.1 General Diagnosis (OE-Level All System Diagnosis)

The DollarFix PF8 can access all available vehicle ECU systems to read information and perform diagnostics. This includes systems such as ECM (Engine System), ABS (Anti-Lock Brake System), SRS (Airbag System), TCM (Transmission System), TPMS (Tire Pressure Monitor System), SAS (Steering Angle System), BCM (Body Control System), EPB (Electric Park Brake System), EPS (Electric Power Steering System), AC (Air Conditioning System), IC (Instrument System), and Security System.

DollarFix PF8 performing an OE-Level All Systems Diagnostic Scan, showing a list of vehicle modules and their status, with options for Auto VIN/Scan, Live Data, Read Codes, Clear Codes, ECU Information, Active Test, and Freeze Frame.
Figure 4: OE-Level All System Diagnosis Interface
  1. From the main menu, tap on "Intelligent Diagnosis" or "Diagnose".
  2. The tool will automatically identify the vehicle via Auto VIN/Scan. If not, you may need to manually select the vehicle make, model, and year.
  3. Select "Full System Scan" to perform a comprehensive diagnostic check.
  4. Review the displayed fault codes and system statuses. You can read and clear fault codes, view live data streams, and access ECU information.

6.2 34+ Maintenance Service Functions

The DollarFix PF8 supports over 34 reset and maintenance functions. Note that not all vehicles support all reset functions. Please consult the vehicle's manual or contact support for specific compatibility.

Image showing various maintenance service functions available on the DollarFix PF8, including Oil Reset, EPB Reset, SAS Reset, BMS Reset, ABS Bleeding, Throttle Matching, DPF Reset, and Injector Coding, along with a list of other functions like IMMOBILIZER, Sunroof Reset, Suspension Reset, Gearbox Reset, AFS Headlamp Reset, Gear Learning, TPMS Reset, A/F Reset, ADBLUE Reset, Coolant Bleed, EGR Reset, Language Change, Nox Sensor Reset, Odometer Calibration, Seat Calibration, STOP/START, Reset AIRBAG, Transport Mode, TIRE Reset, Windows Calibration, Clutch Matching, ECU Reset, FRM Matching, Gateway Module Data Calibration, Rainfall Light Sensor, and Turbocharging Matching.
Figure 5: 34+ Maintenance Service Functions Overview

Key functions include:

  • Oil Reset: Resets the oil maintenance light and enables a new maintenance cycle after an oil change.
  • Brake Reset: Resets the brake system after replacing brake pads, wear sensors, or servomotors.
  • BMS Battery Reset: Deletes fault codes and re-matches the battery monitoring unit after battery replacement.
  • DPF (Diesel Particulate Filter) Regeneration: Initiates the regeneration process to clear accumulated particles in the DPF.
  • SAS Steering Angle Reset: Performs steering angle learning after disassembly or replacement of steering-related parts.
  • TPMS Tire Pressure Reset: Resets tire pressure monitoring system for vehicles without tire pressure sensors or after tire-related maintenance.
  • IMMO Key Matching: Required when replacing ignition switch key, ignition switch, instrument panel, ECU, BCM, or remote control battery.
  • ABS Bleeding: Bleeds the ABS system after replacing ABS components, brake pump, or brake fluid.
  • Sunroof Reset: Resets the sunroof control unit after communication problems or replacement.
  • Suspension Reset: Adjusts body height sensors for level calibration after replacement or incorrect car level.
  • Gearbox (Transmission) Reset: Forces the automatic transmission control unit to learn after transmission part wear or replacement.
  • AFS Headlamp Reset: Initializes the adaptive headlight system after replacing headlights or automatic motor.
  • Injector Coding: Codes or recodes each cylinder injector after ECU or injector replacement for accurate fuel injection control.
  • ETS Learning (Throttle Matching): Performs throttle matching after replacing the electronic control unit, electronic throttle assembly, or cleaning the throttle.
  • Gear Learning: Required after replacing engine ECU, crankshaft position sensor, crankshaft flywheel, or when gear learning fault codes are present.
  • EGR Self-Learning: Turns off the engine/EPC fault indicator light after cleaning or replacing the EGR valve.
  • A/F Reset: Sets or learns Air/Fuel ratio parameters.
  • Adblue Reset (Diesel Engine Exhaust Gas Filter): Turns off the Adblue fault indicator light after replacing or filling diesel exhaust treatment fluid.
  • Airbag Reset: Resets airbag data to clear collision fault indicators (available for some models).
  • Coolant Bleeding: Activates the electronic water pump before bleeding the coolant system (common in BMW).
  • Tyre Modification: Sets tire size parameters after tire modification or replacement.
  • Language Change: Changes the system language of the vehicle central control panel.
  • Nox Sensor Reset: Resets the catalytic converter learned value after Nox sensor re-initialization or replacement.
  • Odometer Read: Reads actual mileage (does not support modification or zeroing).
  • Stop/Start Reset: Opens or closes the automatic start-stop function via ECU hidden function settings (if supported by vehicle hardware).
  • Seat Calibration: Matches seats with memory function after replacement or repair.
  • Transport Mode: Deactivates transport mode to restore normal vehicle functions after power consumption reduction measures.
  • Windows Calibration: Performs door window matching to recover ECU initial memory and automatic ascending/descending function.
  • ECU Reset: Resets ECU to display correct codes after ECU coding.
  • Clutch Matching: Learns the clutch engagement point after replacing the control unit, gearbox, or clutch.
  • Rainfall Light Sensor: Initializes the rain/driving light sensor after windscreen or sensor replacement.
  • FRM Matching: Resets the FRM control unit (BMW and MINI) to clear fixed faults related to light short circuits.
  • Turbocharging Matching: For learning after replacement of turbocharger system components or resetting the turbocharger learning value.
  • Gateway Module Data Calibration: Changes VIN after replacing the gateway control unit due to inconsistency.

6.3 Bi-Directional Control / Active Tests

Bi-directional control allows the diagnostic tool to send commands to vehicle modules to perform specific tests and functions, while simultaneously observing the resulting data. This is crucial for accurately identifying and fixing issues.

Image illustrating various active tests that can be performed with the DollarFix PF8, including Windows, Mirrors, Headlights, Horns, Wipers, Fuel Injectors, Air Conditioner, Cycle A/C Clutch, and ABS Pump Test.
Figure 6: Bi-directional Control / Active Tests

Commonly used tests include:

  • EVAP Test
  • Cycling A/C Clutch On/Off
  • Cycling ABS Pump Motor
  • Turn On/Off the Light
  • Turn On/Off the Sound Horn
  • Turn On/Off Radiator Fan
  • Modulate the Throttle
  • Open/Close Windows
  • Down/Left/Right/Up Mirror
  • Switch Fuel Injector On/Off
  • Injector Buzz Test (for Ford), Injector Test
  • Turn Off ACC Lane Keeping Assist System (LKAS)
  • Turn ON/OFF Front and Rear Side ACM Solenoid
  • Turning the Fuel Pump On and Off
  • Cycling the A/C Clutch On and Off
  • Oil Pressure Control Test
  • Vehicle Level Position Calibration
  • Brake Vacuum Pump
  • Wheel Speed Sensor Supply

6.4 ECU Coding & Key Programming

The DollarFix PF8 supports advanced functions like ECU Coding and Key Programming.

Image detailing Advanced ECU Coding features like Unfold Hidden Features, Optimize Vehicle's Performance, Disable Annoying Function, and Customize OE-Settings. Also shows Key Programming functions: Add a Key, Rewrite Keys, Reset/Relearn Keys, and All Key Lost.
Figure 7: ECU Coding and Key Programming Features
  • ECU Coding: This function helps re-flash vehicle control modules, allowing you to reprogram adaptive data for certain components after repairs or replacements. It enables multiple car systems to recognize each other and can flash hidden features or disable annoying functions (e.g., changing interior light, activating cornering headlights, deactivating buzzing sounds). Always read and record the original module’s information before coding.
  • Key Programming: The tool supports adding new keys, rewriting existing keys, resetting/relearning keys, and addressing situations where all keys are lost. Note that coding functions vary by vehicle model; check compatibility first.

6.5 Full OBD2 Functions

The DollarFix PF8 provides all standard OBD2 functions for basic diagnostics:

  • Read extensive current, pending, and permanent codes in the OBD system.
  • Clear detected fault codes and turn off the Check Engine Light.
  • View graphical live data of vehicle's computer module(s).
  • View the vehicle's operating parameters at the moment a DTC is detected (Freeze Frame).
  • Read I/M readiness status for emissions compliance.
  • Perform O2 sensor tests to check fuel efficiency and vehicle emissions.
  • Read the results of on-board diagnostic monitoring tests for specific components/systems.
  • Retrieve vehicle information (VIN, CINs, and CVNs).
  • Perform component tests, such as initiating a leak test for the vehicle's EVAP system.

6.6 Vehicle Coverage and Language Support

Image showing the DollarFix PF8 with a list of features and hardware specifications, emphasizing its broad vehicle coverage and update capabilities.
Figure 8: Broad Vehicle Coverage and Features

The DollarFix PF8 is compatible with approximately 98% of cars manufactured since 1996 that support the OBDII protocol. It supports a wide range of American, European, and Asian vehicle brands. Please note that Japanese cars compatible with the JOBD protocol are not supported.

The device supports 28 languages, including English, German, Spanish, French, Italian, Portuguese, Russian, Polish, Turkish, Dutch, Chinese (Traditional), Greek, Slovak, Romanian, Arabic, Croatian, Slovenian, Finnish, Japanese, Korean, Czech, Persian, Swedish, Serbian, Danish, Vietnamese, and Bulgarian.

7. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the device. Avoid using abrasive cleaners or solvents.
  • Storage: Store the device in a dry, cool place away from direct sunlight and extreme temperatures.
  • Software Updates: Regularly check for and install software updates to ensure optimal performance and compatibility.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods.

8. Troubleshooting

  • Device not powering on: Ensure the battery is charged. Connect the charger and try again. If the issue persists, contact support.
  • No communication with vehicle: Verify that the VCI connector is securely plugged into the vehicle's OBD-II port and the diagnostic tool. Ensure the vehicle's ignition is ON. Check Bluetooth connection. Try a different vehicle to rule out vehicle-specific issues.
  • Software freezing/crashing: Restart the device. Ensure the software is up to date. If the problem continues, perform a factory reset (refer to the device settings, note that this will erase user data).
  • Specific function not working: Not all vehicles support all functions. Verify compatibility for your specific vehicle make, model, and year. Ensure the software is updated.

9. Specifications

FeatureSpecification
Brand NameDollarFix
ModelPF8
Item TypeEngine Analyzer
ElectronicYes
Is Batteries IncludedYes
Item Weight6kg
External Testing CertificationCE
VoltageFOR 12V CARS
Special FeaturesBluetooth, Wifi
Software VersionNEW
Hardware VersionNEW
OriginMainland China
CertificationRoHS, FCC, CE
Screen Size8-inch HD Touchscreen
Screen Resolution1280*800
Operating SystemAndroid 8.1
CPU4 Cores 1.5GHz
RAM2GB
ROM64GB
Battery Capacity12600mAh
Camera8MP Rear Camera

10. User Tips

  • The DollarFix PF8 performs well as an engine analyzer, offering robust Wifi, Bluetooth, and electronic functionalities for comprehensive diagnostics.
  • For advanced functions like ECU programming and injector programming, ensure you have the correct procedures and data for your specific vehicle model. Always back up original module information before making changes.
  • Regularly check for software updates to ensure the tool remains compatible with the latest vehicle models and diagnostic protocols.

11. Warranty and Support

11.1 Software Updates

The DollarFix PF8 includes 2 years of free software updates from the date of purchase. After this period, you can continue to use all downloaded software, but new updates and software downloads will require a subscription. The current subscription cost is 399 USD per year.

11.2 Technical Support

For technical assistance, troubleshooting, or inquiries regarding specific vehicle compatibility, please contact DollarFix customer support. Refer to the contact information provided with your product documentation or on the official DollarFix website.

Video 1: DollarFix PF8 Product Demonstration. This video showcases the device's features, hardware, and various diagnostic capabilities, including intelligent diagnosis, maintenance services, ECU coding, and data stream analysis.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.