XTOOL InPlus IP819 V2.0

Contents

XTOOL InPlus IP819 V2.0 Automotive Diagnostic Scanner User Manual

Smart Diagnostic System

1. Introduction

The XTOOL InPlus IP819 V2.0 Smart Diagnostic System is a professional scan tool designed for comprehensive vehicle diagnostics. Running on Android 10, it features a 7.0-inch capacitive touch screen with 1024x600 resolution, offering a user-friendly interface and multi-language support. This device is an upgraded version of previous models, providing advanced functions such as ECU Coding, 39+ Reset Functions, Active Test/Bi-directional Control, VAG Guide Function, built-in CAN FD, DOIP, FCA AutoAuth, Key Programming, and Auto VIN Scan. It supports over 150 brands and 15,000+ models globally, with 3 years of free software updates and lifetime free usage of downloaded software.

Product Overview Video

This video provides a brief overview of the XTOOL InPlus IP819 V2.0's features, including its Android 10 OS, 7-inch touch screen, 2GB RAM + 64GB ROM, 5000mAh battery, ECU coding, bi-directional controls, full system diagnostics, special functions, live data graphing, and report generation.

Tablet Components

The tablet features several ports and components for its operation:

Diagram of XTOOL IP819 V2.0 tablet showing its components like Type-C port, DB15 port, reset hole, power button, microphone, camera, speaker, and nameplate.

This image illustrates the physical components of the XTOOL InPlus IP819 V2.0 tablet, highlighting its 7-inch touchscreen, Android 10 OS, 2GB RAM + 64GB ROM, 5000 mAh battery, and Type-C fast charging port.

  1. Type-C Port: For charging and data transfer.
  2. DB15 Port: Main diagnostic connection port.
  3. Reset Hole: For device reset.
  4. Power Button: To turn the device on/off.
  5. Microphone: For audio input.
  6. Camera: For image capture.
  7. Speaker: For audio output.
  8. Nameplate: Contains product identification information.

2. Safety Precautions

Please read this user manual carefully before using the Smart Diagnostic System. Pay attention to the words "Note" or "Caution" for appropriate operation.

Operation Instructions for Safe Use:

  • Keep the device away from heat or fumes when in use.
  • If the vehicle battery contains acid, keep your hands, skin, and fire sources away from the battery during testing.
  • The exhaust gas of the vehicle contains harmful chemicals. Ensure adequate ventilation.
  • Do not touch the vehicle cooling system components or exhaust manifolds when the engine is running due to high temperatures.
  • Make sure the car is securely parked, and the transmission is in Neutral or P (Park) position to prevent movement when the engine starts.
  • Ensure the (DLC) Diagnostic Link Connector is functioning properly before starting the test to avoid damage to the Diagnostic Computer.
  • Do not switch off the power or unplug the connectors during testing, as this may damage the ECU (Electronic Control Unit) and/or the Diagnostic Computer.

Cautions:

  • Avoid shaking, dropping, or dismantling the Scan Tool as it may damage internal components.
  • Use only your fingertips to touch the LCD screen. Hard or sharp objects may damage the Scan Tool.
  • Do not use excessive force.
  • Do not expose the screen to strong sunlight for a long period.
  • Keep the Scan Tool away from water and moisture.
  • Store and use the Scan Tool only within the temperature ranges identified in the Technical Specifications section.
  • Keep the unit away from strong magnetic fields.

3. Setup

Package Contents

The XTOOL InPlus IP819 V2.0 package includes the following items:

Image showing the contents of the XTOOL IP819 V2.0 box, including the main unit, charger adapters (US, EU, EN), VGA to OBD II main cable, Type-C to Type-C cable, Type-C to Type-A cable, packing list, and certificate of quality.

This image displays all the items included in the product box, ensuring you have all necessary components for operation.

  • XTOOL InPlus IP819 V2.0 Main Unit
  • Charger US Adapter
  • Charger EU Adapter
  • Charger EN Adapter
  • VGA to OBD II Main Cable
  • Type-C to Type-C Charger Cable
  • Type-C to Type-A Charger Cable
  • Packing List
  • Certificate of Quality
  • Hard Carrying Case

Initial Device Setup

  1. Power On: Press and hold the Power button to turn on the tablet.
  2. Language Selection: Select your preferred App language.
  3. Activation: Input your E-mail address and click OK to complete the activation.
  4. Software Update: Ensure the Diagnosis APP is updated to the latest version via Settings > APP.

Vehicle Connection

Follow these steps to connect the diagnostic tool to your vehicle:

Four-step diagram showing how to connect the XTOOL IP819 V2.0 to a vehicle. Step 1: Power on and activate the tablet. Step 2: Connect the main cable to the tablet. Step 3: Plug the main test cable into the vehicle's DLC port. Step 4: Tablet is ready for diagnosis.

This diagram illustrates the four main steps for connecting the diagnostic tablet to a vehicle's OBD-II port.

  1. Connect the main cable to the tablet and tighten the screws.
  2. Plug the main test cable into the vehicle's DLC (Diagnostic Link Connector) port.
  3. Your tablet is now ready for diagnostic.

4. Operating Instructions

Vehicle Selection

The Scan Tool supports three methods to access the smart diagnostics system:

Screenshot of the XTOOL IP819 V2.0 interface showing vehicle selection options: Auto Scan, Manual Input, and Select Vehicle by Area, with various car brands listed.

This image shows the main menu for vehicle selection, offering automatic VIN scanning, manual input, and selection by region/brand.

  • AUTO SCAN: Supports automatic reading of the vehicle VIN code. Tap the "AUTO SCAN" button on the diagnosis system entrance. Ensure the car and device are well connected.
  • MANUAL INPUT: Allows manual input of the car's 17-character VIN code for accurate test results.
  • SELECT VEHICLE BY AREA: Choose a car brand by selecting the appropriate region (e.g., Europe, China, America, Asia) at the top of the screen, then select the vehicle model.

Diagnosis Functions

The Scan Tool supports various diagnostic functions:

  • Read ECU Information: Reads ECU version information (software/hardware versions, models, production date, part numbers).
  • Read/Clear Trouble Code (DTCs): Reads and clears current, historical, and pending Diagnostic Trouble Codes.
  • Read Live Data: Displays real-time information from various sensors (PIDs) in text, graph, or combined graph format.
  • Freeze Frame: Records data at the moment a fault occurs, useful for analyzing component failures.
  • Actuation Test (Bi-Directional Control): Sends commands to vehicle components to perform specific functions and test their integrity.
  • Special Functions: Provides various reset or re-learning functions for vehicle systems.

Live Data Graphing

Screenshot of the XTOOL IP819 V2.0 displaying 8-in-1 live data stream with a car in the background, showing multiple graphs for real-time monitoring.

This image demonstrates the 8-in-1 live data stream feature, allowing users to monitor multiple parameters simultaneously for comprehensive analysis.

The IP819 allows you to focus on suspicious data parameters by displaying up to 8 individual graphs or merging them into one chart for better comparison. You can record and playback data, analyze real-time data, and export data streams as CSV files.

Diagnostic Report

Screenshot of the XTOOL IP819 V2.0 showing a V2.0 Diagnostic Report interface with options to customize, generate automatically, understand issues, and share/print out.

This image highlights the features of the V2.0 Diagnostic Report, including customization, automatic generation, and options to share or print.

The Diagnostic Report function is used for viewing and printing saved files such as Live Data, Trouble Codes, or pictures generated during diagnosis. It includes:

  • Diagnosis Report: Provides a history of diagnostic reports, allowing you to view and delete them.
  • Data Playback: Replays recorded live data.
  • Data View: Views saved live data in different ways.

You can customize report content, revise report names, add logos/customer information, and share/print reports.

5. Special Functions

The IP819 offers over 39 special functions to address various vehicle maintenance and reset needs. These functions cover 99% of daily and professional repair needs for 150+ brands.

Grid of 39+ Hottest Services icons on the XTOOL IP819 V2.0, including Oil Reset, Crank Sensor Relearn, TPMS Reset, Throttle Relearn, Injector Coding, Suspension, Gearbox Match, VGT Relearn, SAS, Start/Stop Reset, FRM Reset, HV Battery, etc.

This image displays a comprehensive list of over 39 special functions available on the XTOOL IP819 V2.0, covering a wide range of maintenance and reset procedures.

Advanced ECU Coding

Advanced ECU Coding features on XTOOL IP819 V2.0, showing PMI Function, Flash Hidden Features, and Online & Offline ECU Coding for various car brands.

This image details the advanced ECU Coding capabilities, including PMI function, flashing hidden features, and online/offline coding options.

The IP819 provides advanced ECU coding functions for VW, AUDI, SKODA, BENZ, and Mitsubishi vehicles. This allows for customizing OE-settings (Retrofit/Modification), matching replaced components, and reprogramming adaptive data. It supports Online Coding, Offline Coding, Personalization, and Activating Hidden Functions.

Programmable Module Installation (PMI)

When replacing or initializing a module, the PMI function allows you to copy data from the original module and install it to the new unit. This function is primarily for Ford, Lincoln, and Mazda vehicles.

Flash Hidden Functions (ECU Configurations)

Customize vehicle functions such as disabling seat belt alarms or turning off daytime running lights. Compatible with BMW, VW, AUDI, SKODA, TOYOTA, LEXUS, SCION, MAZDA, FORD, and LINCOLN.

Bi-directional Control / Active Test

Image showing the XTOOL IP819 V2.0 performing a 4000+ Active Test, with a car in the background and the scanner displaying various actuation test options.

This image illustrates the active test capabilities, allowing the scanner to send commands to vehicle components to identify faults quickly.

This function allows users to send commands to the related ECU, driving actuators to perform specific functions (e.g., switching solenoids, relays, or switches). This helps determine the integrity of the system or parts without removing components. Examples include Fuel Pump Test, Cycling ABS Motor Pump, Compression Test, Cooling Fan Test, HVAC Test, and Window Up/Down tests.

VAG Guided Function

Image showing the XTOOL IP819 V2.0 with an 'Exclusive VAG Guide' interface, providing step-by-step instructions for repair, mainly for VW, Audi, Skoda, Seat.

This image highlights the VAG Guided Function, offering specific repair guidelines for Volkswagen Group vehicles.

Designed for VW, Audi, Skoda, and Seat vehicles, this function provides step-by-step guidance for complex procedures, simplifying repairs and preventing incorrect operations.

FCA AutoAuth Access

Image showing 'FCA AutoAuth' compatibility with Chrysler, Dodge, Fiat, and Jeep vehicles, indicating no registration fee or accessories needed.

This image shows the FCA AutoAuth feature, enabling communication with Secure Gateway Modules on newer FCA vehicles.

The IP819 V2.0 supports access to the Security Gateway Module on 2018 and newer FCA cars (Chrysler, Dodge, Jeep, Fiat). Register with AutoAuth to bypass the gateway and perform diagnostics and bi-directional controls without a bypass cable.

CAN FD / DOIP Protocol Support

Image showing 'CAN FD & DOIP Supported' with a world map and car brands like Chevrolet, Ford, Cadillac, BMW, Porsche, Nissan, Toyota, indicating broad coverage.

This image illustrates the global coverage and support for CAN FD and DOIP protocols, listing various compatible car brands.

The IP819 supports newer communication protocols: CAN FD for MY2020+ GM models (GM, Cadillac, Chevrolet, Buick) and DOIP for BMW E/F/G Chassis, Jaguar, and Land Rover vehicles (after 2020). No adapters are needed for CAN FD.

IMMO Reset / Key Programming

Image showing 'Key Fob Programming (Basci)' with a car and various key programming functions like Read PIN Code, All Key Lost, Add New Keys, Generate Dealer Key, Check Key Number, IMMO Reset, Remote Learning.

This image details the key programming capabilities, including adding new keys, handling all keys lost, and IMMO reset functions.

This function allows for key programming and reading PIN codes. It can disable lost vehicle keys, program new replacement key fobs, add new keys, generate dealer keys, and perform remote learning. Note: Not all cars support key programming; please check compatibility with the seller.

Specific Special Functions

Below are detailed instructions for some commonly used special functions:

ABS Bleeding

This function is used to bleed the brake system when the ABS contains air, restoring ABS brake sensitivity. It is necessary after replacing the rear brake distributor pump, severe brake fluid shortage, or changing the brake fluid.

  1. Read operating instructions and precautions on the screen.
  2. Attach a bleeder bottle to the left rear bleeder screw.
  3. Open the left rear bleeder screw.
  4. Click "OK" to enter the bleed procedure. Continuously pump the brake pedal with steady applies every 2 seconds.
  5. Continue pumping until air bubbles are no longer visible, then select "OK" for the next wheel.
  6. Repeat the procedure for the left front, right front, and right rear wheels.
  7. Stop pumping the brake pedal and close the right rear bleeder screw.
  8. Click "OK" to complete the test.

Caution:

  • The ABS pump screw needs to be unscrewed.
  • Brake fluid will be under pressure; secure the bleed hose and open bleeder screws slowly.
  • Some vehicles do not support automatic bleeding, requiring manual bleeding.

Oil Reset

Resets the engine oil life system, which calculates the optimum oil life change interval. This reset is required after each oil change.

  1. Enter the Oil Reset menu and select the vehicle model.
  2. Follow on-screen instructions and press OK.
  3. Enter the Maintenance mileage reset menu.
  4. Click INPUT, enter the new value for remaining oil life, and press OK.
  5. Confirm the new value and click OK to complete.
  6. A "Write successfully" message will confirm completion.

EPB (Electronic Parking Brake) Reset

Resets the electronic parking brake system and brake pads. Necessary when brake pads or sensors are replaced, or the brake pad indicator lamp is on.

  1. Enter the EPB menu and select the vehicle model.
  2. Follow on-screen instructions and press YES.
  3. Enter the Enter maintenance mode menu, release the handbrake, and press OK.
  4. Wait for 'Successful operation' message, then press OK to exit.
  5. Enter the Exit maintenance mode menu and wait for 'Successful operation' message.

SAS (Steering Angle Sensor) Calibration

Calibrates the steering angle sensor to store the current steering wheel position as the straight-ahead position. Required after replacing steering angle position sensor, steering mechanical parts, four-wheel alignment, or car body repair.

  1. Enter the SAS menu and select the vehicle model.
  2. Enter the Set steering angle sensor menu and follow instructions.
  3. Wait for instructions and press YES.
  4. Follow instructions and press OK.
  5. Wait for instructions and press OK.
  6. A 'Function execution is completed' message will confirm success.

BMS (Battery Management System) Reset

Evaluates battery charge state, monitors closed-circuit current, registers battery replacement, and activates the rest state of the vehicle. Required when the main battery is replaced or to re-match the control module and motoring sensor.

  1. Enter the BMS Reset menu and select the vehicle model.
  2. Turn on the ignition switch.
  3. Press OK to continue.
  4. Enter the battery capacity (within the given range) and press OK.
  5. Enter the battery manufacturer and press OK.
  6. Enter the 10-digit battery serial number and press OK.

Injector Coding

Writes the identification code of the fuel injector into the ECU, allowing the ECU to recognize new injectors. Required after replacing the ECU or injector.

  1. Enter the Injector coding menu and select the chassis model.
  2. Enter the Fuel injection nozzle injection volume adjustment menu.
  3. Read the displayed note and press OK.
  4. Read and confirm the value stored in the cylinders.
  5. Enter the Change the value of cylinder menu for the replaced injector(s), enter the new 5-digit value, and press OK.
  6. Wait for 'Write successfully' message.
  7. Turn off the ignition switch.
  8. Wait for the message to turn on the ignition switch.
  9. Re-enter the Fuel injection nozzle injection volume adjustment menu to verify the new value(s).

DPF (Diesel Particulate Filter) Regeneration

Manages DPF regeneration, component replacement teach-in, and DPF teach-in after ECM replacement. Clears PM (Particulate Matter) from the DPF filter.

  1. Enter the DPF menu and select the vehicle model.
  2. Enter the DPF regeneration menu.
  3. Read and complete the requisites listed, then press OK.
  4. Read the fuel tank level and ensure it meets requirements.
  5. Read the carbon deposit load.
  6. Choose "drive to warm up" and follow instructions, then press OK.
  7. Read instructions carefully and press OK.
  8. Follow instructions and press OK. Important: Pay attention to the Note.
  9. Press OK to start regeneration.
  10. Wait for carbon deposit value to decrease and 'Emergency regeneration has been completed' message (up to 40 minutes).
  11. Wait 2 minutes for the particulate filter to cool down.
  12. Press "drop out" to exit the DPF function.

TPMS (Tire Pressure Monitor System) Reset

Performs learning, matching, and resetting functions for tire pressure sensors. Required after tire replacement, troubleshooting tire pressure problems, or other signal loss issues.

The TPMS Reset function can be performed using four methods: Automatic Relearn, Static Relearn, Copy ID, and OBD Relearn. The specific method and procedure may vary by vehicle model.

Note:

  • Some vehicles may require a TPMS activation tool for sensor matching.
  • After the learning process, you may need to drive the car for a while before the fault light turns off.
  • Tire pressure imbalance can also cause the tire pressure light to illuminate.
  • This Scan Tool is not a replacement for a TPMS activation tool; it only provides TPMS Reset/Relearn functions. Consult your local dealer for a professional TPMS activation tool.

6. Maintenance

Software Update

After activating the device, update the software modules via the "Updates" screen. The device identifies available software packages for download. All updates are performed directly via the internet.

Screenshot of the XTOOL IP819 V2.0 language selection menu, showing various languages like English, Arabic, French, Polish, Portuguese, Russian, etc.

This image shows the language selection interface, indicating support for 22+ languages.

Caution:

  • If you change the language configuration after contacting XTOOL Support, you need to download all software packages again.
  • If the subscription expires, previously downloaded software remains functional, but no new updates will be available.
  • XTOOL is not responsible for restoring software deleted due to personal operation.

Factory Reset

Performing a factory reset in the Android OS system will erase all custom settings and data, restart the device, and enter factory reset mode.

To perform a factory reset:

  1. From the main home page, click on the Settings mode.
  2. Click on “Backup & reset”.
  3. Follow the on-screen prompts to initiate the factory reset process.

After the reset, the Scan Tool will restart, and you can select the language in the initial setup interface.

7. Troubleshooting

General Diagnostic Precautions

  • The car's voltage range should be +9V to +36V DC.
  • For special functions, follow prompts and meet test conditions (e.g., engine water temperature 80-105°C, headlights/AC off, accelerator pedal released).
  • If the vehicle's electronic control systems are complex and you encounter testing issues or abnormal data, search for the ECU of the vehicle and select the menu for the model on the ECU nameplate.
  • If the vehicle type or electronic control system is not found, upgrade the diagnostic software or consult XTOOL technical service.
  • Only use wiring harnesses provided by XTOOL to avoid damage.
  • Do not shut down the device directly during a Diagnostics function; cancel the task first.

DTC Status Descriptions

Understanding DTC statuses helps in effective troubleshooting:

DTC StatusDescriptionSuggestions
Current/PresentTrouble codes stored in the ECU when both continuous and non-continuous (2 trip) monitors fail. MIL is commanded On.Clear using Scan Tool or wait for ECU monitor to complete 40 consecutive trips without fault.
History/StoredTrouble codes stored when continuous and non-continuous monitors (2nd trip) fail. Set with Current DTCs and not cleared by ECU monitor.Clear using Scan Tool.
PendingCodes that prep themselves when a fault is determined in the engine cycle. Preliminary investigation for engine.Not severe, but should not be ignored. Can be cleared using Scan Tool.
PermanentTrouble codes stored in the ECU when continuous and non-continuous monitors fail. Set with Current and History DTCs.Cannot be cleared by Scan Tool. Cleared when ECU monitor completes and passes three consecutive trips.
Active/staticFault is happening at the moment and should be addressed.Cannot be cleared directly by Scan Tool. Internal fault must be eliminated manually.
Passive/sporadicFault occurred in the past.Clear by Scan Tool and check if DTC reappears.

Vehicle Not Recognized

If your vehicle model is not recognized during the diagnostic process, try the following steps:

  1. Update all software and check if the APP is updated in [Settings].
  2. Go to Diagnosis on the main menu, manually select the engine system to read ECU information, and confirm if the VIN can be read.
  3. Contact the XTOOL technical team with the VIN code to confirm if the model supports automatic VIN identification.

8. Specifications

The XTOOL InPlus IP819 V2.0 boasts robust hardware for efficient diagnostic operations:

Image showing the XTOOL IP819 V2.0 tablet with internal components highlighted, detailing Android 10 OS, CPU 1.5 GHz 4-Core, 2GB RAM + 64GB ROM, 7-inch Touchscreen 1024x600 Resolution, 5000 mAh Battery, and Type-C Fast Charging.

This image provides a visual breakdown of the hardware specifications, emphasizing the device's performance and design.

FeatureSpecification
Operating SystemAndroid 10
Processor1.5 GHz 4-Core
Memory2GB RAM + 64GB ROM
Display Size7.0-inch Touch Screen
Display Resolution1024×600
Communication InterfaceOBD-II
ConnectivityUSB, Wi-Fi, Wired
SensorsGravity sensor, Light sensor
Audio Input/OutputMicrophone/Speaker
Battery5000 mAh
Power Voltage5V
Power Consumption8W
Operating Temperature-20 to 60℃
Storage Temperature-40 to 70℃
Humidity<90%
Dimensions (L*W*H)249*142*33.5mm
Item Weight2kg
External Testing CertificationCE
Wireless FunctionNo
Software UpdateYes
Hardware Version2026
Software VersionNewest
Is Batteries IncludedYes

9. Warranty & Support

Warranty

The XTOOL InPlus IP819 V2.0 comes with a 2-year warranty. It includes 3 years of free software updates starting from the day of activation. Even after the free update period expires, previously downloaded software can be used normally.

Aftersales Services

For technical assistance, please contact XTOOL support:

  • E-Mail: supporting@xtooltech.com
  • Tel: +86 755 21670995 or +86 755 86267858 (China)
  • Official Website: www.xtooltech.com

Remote Assistance

XTOOL offers remote online technical support. Provide your device S/N, car VIN, and function requirement to save time.

To obtain remote support:

  1. Ensure your tablet is connected to the internet.
  2. Turn on the power of the tablet.
  3. Click "Remote" in the Diagnostic application. The TeamViewer screen will display your device ID.
  4. Provide your ID to the XTOOL technician.
  5. A pop-up window will ask for permission to control your device; click "Allow" to accept.

User Manual PDF

A detailed user manual in PDF format is available for download. This document provides comprehensive guides and additional information for your XTOOL InPlus IP819 V2.0. You can view the PDF at: XTOOL IP819 User Manual (PDF)

10. User Tips

  • Language Change: When switching to a new language, remember to re-download the model software in the corresponding language for full functionality.
  • Compatibility Check: For advanced functions like ECU coding, key programming, and bi-directional control, compatibility varies by vehicle. Always check with the seller using your VIN before attempting these functions.
  • Remote Support: Ensure a stable internet connection when using remote assistance for effective troubleshooting.
  • Odometer Adjustment: This device does not support odometer adjustment. If this function is required, please consider other specialized tools.
  • Global Version: The IP819 is a global version and can be used worldwide without IP restrictions.

11. Compliance Information

This device complies with various regulatory standards to ensure safe and proper operation.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

ISED Statement (Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

CE Declaration of Conformity

Shenzhen XTOOLtech Intelligent Co., Ltd declares that this Smart Diagnostic System complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states.

UKCA Declaration of Conformity

Shenzhen XTOOLtech Intelligent Co., Ltd declares that this Smart Diagnostic System satisfies all the technical regulations applicable to the product within the scope of UK Radio Equipment Regulations (SI 2017/1206) and UK Electrical Equipment (Safety) Regulations (SI 2016/1101).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.