DUMBORC X10F X10FG

Contents

DUMBORC X10F / X10FG 10-Channel 2.4GHz RC Receiver Instruction Manual

For X10P-350 Transmitter

Introduction

This manual provides detailed instructions for the DUMBORC X10F and X10FG 10-channel 2.4GHz RC receivers. These receivers are designed to work seamlessly with the DUMBORC X10P-350 transmitter, offering reliable, interference-free operation for RC cars, boats, and tanks. The X10F model is a standard receiver, while the X10FG includes a built-in gyroscope for enhanced stability and control. Both models feature fast response times, stable signal output, and support for various functions including PPM output and optional voltage return.

Product Overview

The DUMBORC X10F and X10FG receivers are compact and lightweight, designed for optimal performance in various RC applications. The primary difference between the two models is the inclusion of a built-in gyroscope in the X10FG, which provides stabilization features.

DUMBORC X10F (Normal) and X10FG (Gyro) receivers

Figure 1: Comparison of DUMBORC X10F (Normal) and X10FG (Gyro) receivers.

Both receivers feature 10 channels, PPM output, an LED indicator, and B+B- ports for power. The X10FG model, with its built-in gyroscope, offers additional control options via its buttons.

DUMBORC X10F receiver without built-in gyroscope

Figure 2: DUMBORC X10F receiver (No Built-in Gyroscope).

DUMBORC X10FG receiver with built-in gyroscope

Figure 3: DUMBORC X10FG receiver (with Built-in Gyroscope).

Button Definitions (X10FG Model)

Diagram of left and right button definitions on X10F(G) receiver

Figure 4: Left and Right Button Definitions for X10F(G) Receiver.

  • Left Button Definition:
    1. Short press once to switch between the forward and reverse directions of the gyroscope.
    2. Short press 3 times to turn on/off the gyroscope.
    3. Long press to set EPA (End Point Adjustment).
  • Right Button Definition:
    1. Long press for 3 seconds to check the code (binding).
    2. Short press once to set runaway protection (fail-safe).
    3. Short press twice to control any channel light.
    4. Short press 3 times to activate PPM mode.

Specifications

Specifications table for DUMBORC X10F(G) receiver

Figure 5: Detailed Specifications of the X10F(G) Receiver.

FeatureDescription
BrandDUMBORC
ModelX10F / X10FG (optional, with/without gyro)
Channels10CH
Fit ForRC Car, Boat, Tank Model
Modulation ModeGFSK
Spreading ModeFHSS 67 channel pseudo-random frequency hopping
Receiver Voltage Range4.8-10V DC
Receiver Operating Current30mA (at 5V)
Product Size40mm * 28mm * 13mm
Weight12g
Remote Control Distance350-400 meters
Output SignalPWM
Gyroscope ModeBuilt-in gyroscope (X10FG only)
Light Control FunctionSupports controlling lights in any channel
Extended FunctionsPPM output, Voltage Feedback
Compatible Remote ControlAll DUMBORC remote controls (specifically X10P-350)

Setup Instructions

  1. Power Connection: Connect the receiver to a power source within the 4.8-10V DC range. Ensure correct polarity (B+B- ports). The receiver supports high voltage servos.
  2. Transmitter Compatibility: Ensure your transmitter is a DUMBORC X10P-350 model for optimal compatibility and performance.
  3. Binding (Checking the Code):
    • Turn on your DUMBORC X10P-350 transmitter.
    • Power on the receiver.
    • On the receiver, long press the Right Button for 3 seconds. The LED indicator should change, signifying it's in binding mode.
    • Follow your transmitter's instructions to complete the binding process. Once successfully bound, the receiver's LED will indicate a solid connection.
  4. Fail-Safe Protection: After binding, short press the Right Button once to set runaway protection (fail-safe). This feature ensures that if the signal is lost, the RC model will return to a predetermined safe state (e.g., neutral throttle, brakes applied).
  5. PPM Mode Activation: If you need to use PPM output, short press the Right Button 3 times to activate PPM mode.
  6. Gyroscope Setup (X10FG only):
    • Turn On/Off Gyro: Short press the Left Button 3 times.
    • Adjust Gyro Direction: Short press the Left Button once to switch between forward and reverse directions of the gyroscope, if needed for your model's orientation.
    • Set EPA (End Point Adjustment): Long press the Left Button to enter EPA setting mode for the gyroscope. Refer to your transmitter's manual for specific EPA adjustments.
  7. Coach Interface: The receiver is equipped with a coach interface. To utilize the coach function, a wireless trainer module must be purchased separately.
  8. Voltage Return (Optional): If you have the optional voltage return receiver, ensure it is correctly connected to your vehicle's battery to monitor its voltage.

Operating Instructions

  1. Basic Operation: Once the receiver is bound to your X10P-350 transmitter and powered, you can operate your RC model using the transmitter's controls. The 10 channels allow for comprehensive control over steering, throttle, and auxiliary functions.
  2. Gyroscope Operation (X10FG only): The built-in gyroscope in the X10FG model helps stabilize your RC vehicle, especially useful for drift cars or models requiring precise handling. Ensure the gyroscope is turned on (short press Left Button 3 times) and its direction is correctly set (short press Left Button once) for your application.
  3. Light Control: The receiver supports controlling lights in any channel. Short press the Right Button twice to toggle or adjust connected lights.
  4. Voltage Feedback: If using a receiver with voltage return capability, monitor your vehicle's battery voltage through your compatible DUMBORC X10P-350 transmitter. This helps prevent unexpected power loss during operation.
  5. PPM Output: For devices requiring PPM input, ensure PPM mode is activated (short press Right Button 3 times) and connect accordingly.

Maintenance

  • Keep Dry: Always keep the receiver dry. Moisture can damage the electronic components.
  • Cleanliness: Periodically clean the receiver and its connectors using a soft, dry cloth. Avoid using solvents or harsh chemicals.
  • Inspect Connections: Regularly check all wire connections to ensure they are secure and free from damage. Loose connections can lead to intermittent signal loss.
  • Antenna Placement: Ensure the antenna is positioned correctly and not obstructed by metal parts of your RC model to maintain optimal signal reception.
  • Storage: When not in use for extended periods, store the receiver in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

ProblemPossible CauseSolution
Receiver not binding/No signalIncorrect binding procedure; Transmitter not powered; Receiver not powered; Out of range; Interference.
  • Ensure both transmitter and receiver are powered on.
  • Re-attempt the binding process carefully (long press Right Button for 3 seconds on receiver).
  • Check battery levels of both transmitter and receiver.
  • Move closer to the RC model.
  • Operate in an area with less 2.4GHz interference.
RC model unresponsiveLoose connections; Servo/ESC issue; Receiver damage.
  • Check all servo and ESC connections to the receiver.
  • Verify servos and ESCs are functioning correctly.
  • Ensure receiver is receiving adequate power.
Gyroscope not working (X10FG)Gyroscope turned off; Incorrect direction; EPA not set.
  • Short press Left Button 3 times to toggle gyroscope on/off.
  • Short press Left Button once to switch gyro direction.
  • Long press Left Button to set EPA if needed.
Unexpected behavior/glitchesInterference; Faulty component; Software glitch.
  • Re-bind the receiver.
  • Test with different servos/ESCs if possible.
  • Ensure the receiver is not exposed to excessive vibrations or moisture.

User Tips

  • Transmitter Compatibility: This receiver is specifically designed for the DUMBORC X10P-350 transmitter. While some users inquire about compatibility with other brands like Flysky, optimal performance and full feature access are guaranteed with the intended DUMBORC transmitter.
  • Gyroscope Choice: Carefully consider whether you need the built-in gyroscope (X10FG model) or a standard receiver (X10F model) based on your RC model's requirements and your driving style. The gyroscope can significantly improve stability for certain applications.
  • Coach Function: If you plan to use the coach function for training or dual control, remember that the wireless trainer module is a separate purchase.
  • Voltage Monitoring: Utilize the voltage return feature (if available on your receiver model) to keep track of your vehicle's battery status, preventing unexpected power loss during operation.

Warranty and Support

No specific warranty information is provided with this product. For any technical assistance, troubleshooting beyond this manual, or inquiries regarding product defects, please contact the seller or DUMBORC customer support directly.

Safety Information

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Always operate RC models in a safe and open environment, away from people, animals, and obstacles.
  • Ensure all connections are secure before operation to prevent loss of control.
  • Do not expose the receiver to water or extreme temperatures.
  • This product is recommended for users aged 14 years and older.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.