1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Hikvision DS-2CD1183G2-LIUF 8MP Smart Hybrid Light Fixed Dome Network Camera. This camera is designed for high-quality surveillance with 8MP resolution, advanced human and vehicle detection, and a Smart Hybrid Light system for versatile night vision. It features a built-in microphone for audio security and supports on-board storage via an SD card slot. The camera is also built to withstand outdoor conditions with an IP67 water and dust resistance rating and IK08 vandal resistance.
Video: A 360-degree view of the Hikvision DS-2CD1183G2-LIUF camera, showcasing its dome design and integrated cables.
2. Key Features
- High quality imaging with 8 MP resolution (3840 × 2160).
- Supports Human and Vehicle Detection for intelligent monitoring.
- Smart Hybrid Light technology provides advanced night vision with long range, offering both IR and white light options.
- Efficient H.265+ compression technology for optimized storage and bandwidth usage.
- Built-in microSD/microSDHC/microSDXC card slot supports on-board storage up to 512 GB.
- Integrated microphone for real-time audio security.
- Water and dust resistant (IP67) and vandal resistant (IK08) for robust outdoor performance.
Image: Overview of the Hikvision DS-2CD1183G2-LIUF camera, highlighting its 8MP resolution, Smart Hybrid Light, SD card support, and compatibility with iVMS-4200, SADP, and Hik-Connect.
3. Specifications

Image: Detailed technical specifications including network protocols, image settings, interfaces, event triggers, and general product information.

Image: Further technical specifications including camera sensor details, lens options, DORI distances, illuminator types, video/audio parameters, and regulatory approvals.
| Category | Parameter | Description |
|---|---|---|
| Camera | Image Sensor | 1/2.7" Progressive Scan CMOS |
| Max. Resolution | 3840 × 2160 (8 MP) | |
| Min. Illumination | Color: 0.01 Lux @ F2.0, AGC ON; B/W: 0 Lux with IR | |
| Day & Night | IR cut filter | |
| Angle Adjustment | Pan: 0° to 355°, Tilt: 0° to 75°, Rotate: 0° to 355° | |
| Shutter Time | 1/3 s to 1/100,000 s | |
| Lens | Lens Type | Fixed focal lens, 2.8 mm (optional 4 mm) |
| Focal Length & FOV (2.8mm) | Horizontal FOV 113°, Vertical FOV 62°, Diagonal FOV 134° | |
| Focal Length & FOV (4mm) | Horizontal FOV 90°, Vertical FOV 49°, Diagonal FOV 108° | |
| Lens Mount | M12 | |
| Aperture | F2.0 | |
| DORI (2.8mm) | Detect | 79 m |
| Observe, Recognize, Identify | O: 31 m, R: 15 m, I: 7 m | |
| Illuminator | Supplement Light Type | IR, White Light |
| Supplement Light Range | Up to 30 m | |
| Smart Supplement Light | Yes | |
| IR Wavelength | 850 nm | |
| Video | Main Stream (50Hz) | 12.5 fps (3840 × 2160, 3200 × 1800, etc.) |
| Main Stream (60Hz) | 15 fps (3840 × 2160, 3200 × 1800, etc.) | |
| Sub-Stream (50Hz) | 12.5 fps (1280 × 720, 640 × 480, 640 × 360) | |
| Sub-Stream (60Hz) | 15 fps (1280 × 720, 640 × 480, 640 × 360) | |
| Video Compression | Main stream: H.265+/H.265/H.264+; Sub-stream: H.265/H.264/MJPEG | |
| Video Bit Rate | 32 Kbps to 16 Mbps | |
| H.264 Type | Baseline Profile, Main Profile, High Profile | |
| H.265 Type | Main Profile | |
| Audio | Audio Type | Mono sound |
| Environment Noise Filtering | Yes | |
| Audio Sampling Rate | 8 kHz/16 kHz | |
| Audio Compression | G.711ulaw/G.711alaw/G.722.1/G.726/MP2L2/PCM/AAC-LC | |
| Network | Security | Password protection, watermark, host authentication, etc. |
| Simultaneous Live View | Up to 6 channels | |
| API | Open Network Video Interface (Profile S, T, G), ISAPI, SDK, Hik-Connect | |
| Protocols | TCP/IP, HTTP, DHCP, DNS, RTP, RTSP, NTP, etc. | |
| User/Host | Up to 32 users, 3 levels (admin, operator, user) | |
| Client | iVMS-4200, Hik-Connect | |
| Web Browser | IE 10, IE 11 (plug-in required); Chrome 57.0+, Firefox 52.0+, Edge 89+ (local service) | |
| Interface | Ethernet Interface | 1 RJ45 10 M/100 M self-adaptive Ethernet port |
| On-Board Storage | Built-in microSD/microSDHC/microSDXC card slot, up to 512 GB | |
| Built-in Microphone | Yes | |
| Reset Key | Yes | |
| Event | Motion Detection | Supports alarm triggering by human and vehicle detection, video tampering alarm, exception |
| Basic Event | Upload to FTP/memory card, send email, notify surveillance center, trigger recording/capture | |
| General | Power Supply | 12 VDC ± 25%, 0.5 A, max. 6 W; PoE: IEEE 802.3af, Class 3, max. 7.5 W |
| Material | Metal & Plastic | |
| Dimensions (Ø x H) | Ø121.5 mm × 97.6 mm (Ø4.78" × 3.84") | |
| Weight | Approx. 550 g (1.2 lb.) | |
| Operating Temperature | -30 °C to 60 °C (-22 °F to 140 °F) | |
| Operating Humidity | 95% or less (non-condensing) | |
| Protection | IP67 (Water and Dust Resistant), IK08 (Vandal Resistant) | |
| Language | English, Ukrainian |
4. Setup and Installation
4.1 Package Contents
Before installation, ensure all components are present:
- Hikvision DS-2CD1183G2-LIUF Camera
- Mounting accessories (screws, wall plugs)
- Quick Start Guide (refer to the full manual for detailed steps)

Image: The Hikvision DS-2CD1183G2-LIUF camera shown with its retail packaging.
4.2 Physical Dimensions
The camera has a diameter of Ø121.5 mm (4.78") and a height of 97.6 mm (3.84"). Refer to the diagram below for detailed measurements.

Image: Technical drawing illustrating the dimensions of the camera in millimeters and inches.
4.3 Mounting Options
The camera is designed for ceiling installation. Various optional accessories are available for different mounting scenarios such as wall mount, pendant mount, vertical pole mount, and corner mount. Junction boxes are also available for clean cable management.

Image: Visual guide to optional mounting accessories including wall mounts, pendant mounts, vertical pole mounts, corner mounts, and junction boxes.
4.4 Power and Network Connection
The camera supports two power options: 12 VDC or Power over Ethernet (PoE) (IEEE 802.3af, Class 3). For network connectivity, use the RJ45 10 M/100 M self-adaptive Ethernet port. This camera is designed for IP/Network Wired connections and does not support Wi-Fi.
4.5 SD Card Installation
The DS-2CD1183G2-LIUF model includes a built-in microSD/microSDHC/microSDXC card slot, supporting cards up to 512 GB for on-board storage. To install, carefully open the camera housing (refer to the detailed installation guide for specific steps) and insert the SD card into the designated slot.
5. Operation
5.1 Initial Setup and Configuration
After physical installation and connection, use Hikvision's client software such as iVMS-4200 or Hik-Connect for initial device discovery and configuration. The SADP tool can also be used for device activation and password reset.
5.2 Live View and Recording
Access the live view and manage recordings through the client software or compatible web browsers (IE 10/11 with plug-in, Chrome 57.0+, Firefox 52.0+, Edge 89+ for local service). The camera supports up to 6 simultaneous live view channels.
5.3 Smart Features
- Human and Vehicle Detection: Configure the camera to trigger alarms or recordings specifically when humans or vehicles are detected, reducing false alarms.
- Smart Hybrid Light: The camera automatically switches between IR (infrared) and white light illumination based on environmental conditions and detection events. White light can be used to deter intruders or provide color night vision.
- Built-in Microphone: Provides real-time audio monitoring. Ensure local regulations regarding audio recording are followed.
5.4 Mobile Access
Monitor your camera remotely using the Hik-Connect app available for Android and iOS mobile systems. This allows for live viewing, playback, and receiving event notifications on your smartphone or tablet.
6. Maintenance
6.1 General Care
Regularly clean the camera's dome cover with a soft, damp cloth to ensure clear image quality. Avoid using harsh chemicals or abrasive materials that could scratch the lens or housing.
6.2 Environmental Considerations
The camera is rated IP67 for water and dust resistance, making it suitable for outdoor use. It can operate in temperatures ranging from -30 °C to 60 °C (-22 °F to 140 °F) with humidity up to 95% (non-condensing). Ensure proper installation to prevent water ingress, especially around cable connections.
6.3 Firmware Updates
Periodically check the Hikvision official website or your client software for available firmware updates. Keeping your camera's firmware up-to-date ensures optimal performance, security, and access to new features.
7. Troubleshooting
- No Image/Video: Check power supply (12V DC or PoE) and network cable connection. Verify camera status using SADP tool.
- Cannot Connect to Network: Ensure the Ethernet cable is securely connected. Confirm network settings (IP address, gateway, DNS) are correct. This camera uses a wired IP/Network connection and does not support Wi-Fi.
- Poor Image Quality: Clean the dome cover. Check for obstructions. Adjust image settings (brightness, contrast, sharpness) via client software. Ensure sufficient lighting; the Smart Hybrid Light should activate in low-light conditions.
- SD Card Not Recording: Ensure the SD card is correctly inserted and formatted. Check the recording schedule and event triggers in the camera's settings. The camera supports microSD/microSDHC/microSDXC cards up to 512 GB.
- Audio Issues: Verify the built-in microphone is enabled in settings. Check for environmental noise filtering settings.
- Password Reset: If you forget your password, use the SADP tool for password reset procedures.
8. User Tips
- For optimal night vision, ensure the area within the camera's field of view is clear of obstructions that could reflect IR or white light. The camera has an IR distance of up to 30 meters.
- Utilize the on-board SD card storage (up to 512 GB) as a reliable backup or primary recording method, especially in situations where continuous network recording might be interrupted.
- Take advantage of the Human and Vehicle Detection features to receive more relevant alerts and reduce unnecessary notifications.
- Regularly check the camera's angle adjustment (Pan: 0° to 355°, Tilt: 0° to 75°, Rotate: 0° to 355°) to ensure optimal coverage of your surveillance area.
9. Warranty and Support
For warranty information, please refer to the specific terms and conditions provided at the time of purchase. For technical support, firmware downloads, and additional resources, please visit the official Hikvision support website or contact your authorized dealer.