DEKO DKMT126

Contents

DEKO DKMT126 Power Tool Combo Kit

Instruction Manual

1. Introduction

The DEKO DKMT126 Power Tool Combo Kit is a versatile and comprehensive set designed for various household DIY tasks, repairs, and woodworking projects. This kit includes an 8V cordless drill and a wide array of essential hand tools, providing convenience and efficiency for both beginners and experienced users. Please read this manual thoroughly before using the tools to ensure safe and effective operation.

2. Kit Contents

Your DEKO DKMT126 kit comes neatly organized in a durable carrying case. Please verify that all components listed below are present:

DEKO DKMT126 Power Tool Combo Kit with all components labeled

Figure 1: Labeled components of the DEKO DKMT126 Tool Kit

  • 1x 8V Cordless Driver (Drill)
  • 1x Claw Hammer (8oz)
  • 1x Adjustable Wrench (6")
  • 1x Long Nose Pliers (6")
  • 1x Utility Knife (18mm)
  • 10x Utility Knife Blades (18mm)
  • 1x Measure Tape Ruler (3m)
  • 8x Hex Key Wrenches (1.5-6mm)
  • 2x Screwdrivers (PH1x100, SL5x100mm)
  • 4x Precision Screwdrivers (PH00, 0, SL2.4, 3.0)
  • 1x Hex Nut Screwdriver (6.35mm)
  • 1x Magnetic Bit Holder (60mm)
  • 10x 50L Bits (SL4,5,6, T15,T20, PH0,1,2,3,A.D.)
  • 18x 25L Bits (SL1,1.8,5/32,3/16,1/4,9/32, PH1,2,3, S1,2,3, H2,3,4,5,6,A.D.)
  • 9x 1/4" Sockets (5,6,7,8,9,10,11,12,13mm)
  • 6x Twisted Drills (Drill Bits) (5/64,3/32,1/8,5/32,3/16,1/4")
  • 50x Fasteners (wall plugs and screws)

3. Setup

3.1 Unpacking and Inspection

Carefully remove all tools from the carrying case. Inspect each tool for any signs of damage or missing parts. If any items are damaged or missing, please contact customer support.

3.2 Cordless Drill Battery Charging

The 8V Cordless Driver is powered by a Lithium Ion battery. Before first use, fully charge the drill. Connect the provided Type-C charging cable to the Charging Input Port on the drill and plug the other end into a suitable USB power source. The Battery Indicator Light will show the charging status.

DEKO 8V Cordless Drill with features labeled

Figure 2: Cordless Drill Features

3.3 Installing Drill/Screwdriver Bits

The cordless drill features a 10MM 3/8'' Keyless Chuck for easy bit changes:

  1. Twist the chuck counter-clockwise to open the jaws.
  2. Insert the desired drill bit or screwdriver bit into the chuck.
  3. Twist the chuck clockwise to securely tighten the jaws around the bit. Ensure the bit is centered and firmly held.

4. Operation

4.1 Cordless Drill Operation

The cordless drill is designed for drilling and screwdriving tasks:

  • Forward/Reverse Switch: Located above the Control Trigger, this switch allows you to select the rotation direction for drilling (forward) or removing screws (reverse). Ensure it is in the desired position before operating.
  • Control Trigger: Squeeze the trigger to start the drill. The speed is variable, depending on how much you press the trigger.
  • LED Worklight: Activates when the trigger is pressed, illuminating the work area for better visibility.
  • Applications: The drill provides a maximum torque of 12 N.M, suitable for screwing into wood, plastic, and soft metal materials, as well as general tightening and loosening of screws.
DEKO Cordless Drill showing maximum torque and application examples

Figure 3: Cordless Drill Torque and Applications

4.2 Hand Tool Usage

Each hand tool in the kit is designed for specific tasks. Always select the appropriate tool for the job to ensure safety and efficiency.

Examples of using tools from the DEKO kit: screwdriving, hammering, cutting, and measuring

Figure 4: General Tool Usage Examples

  • Screwdrivers & Precision Screwdrivers: Use the correct tip (Phillips, Slotted, Hex) and size for the screw head to prevent stripping. Precision screwdrivers are ideal for delicate tasks.
  • Claw Hammer: For driving and removing nails. Ensure a firm grip and strike squarely.
  • Adjustable Wrench: Adjust the jaw to fit the fastener snugly before applying force.
  • Long Nose Pliers: Useful for gripping, bending, and cutting wires or small objects.
  • Utility Knife: Always use with caution. Extend only the necessary blade length and cut away from your body. Replace blades when dull for safety and effectiveness.
  • Measure Tape Ruler: For accurate measurements in meters and centimeters.
  • Hex Key Wrenches: For tightening or loosening hexagonal socket screws.

5. Maintenance

Proper maintenance ensures the longevity and performance of your tools:

  • Cleaning: After each use, wipe down all tools with a clean, dry cloth to remove dirt, dust, and debris. For stubborn grime, a slightly damp cloth can be used, followed by thorough drying.
  • Storage: Always store tools in their original carrying case in a dry, cool place, away from direct sunlight and moisture. This prevents rust and keeps tools organized.
  • Anti-Corrosion: Many tools are forged from high-quality steel with a high-polish chrome finish for anti-corrosion protection. However, avoid prolonged exposure to moisture to maintain this protection.
  • Cordless Drill Battery Care: For optimal battery life, avoid completely draining the battery before recharging. Store the drill with a partial charge if not used for extended periods.
  • Blade Replacement: Replace utility knife blades and drill bits when they become dull or damaged to maintain cutting/drilling efficiency and safety.

6. Troubleshooting

This section addresses common issues you might encounter. For problems not listed here, please contact customer support.

  • Cordless Drill Not Turning On: Ensure the battery is charged. Check the Forward/Reverse switch is not in the center (locked) position.
  • Drill Bit Slipping: Ensure the keyless chuck is tightened securely around the bit. The bit should be inserted far enough into the chuck jaws.
  • Screws Stripping: Use the correct size and type of screwdriver bit for the screw head. Apply firm, consistent pressure.
  • Tools Rusting: Ensure tools are clean and dry before storage. Store in a low-humidity environment.

7. Specifications

Detailed technical specifications for the DEKO DKMT126 Power Tool Combo Kit:

Table of technical specifications for DEKO DKMT126

Figure 5: Technical Specifications

AttributeValue
BrandDEKO
Model NumberDKMT126
TypeCombination, Electric Drill, Electric Screwdriver
ApplicationHousehold Tool Set, Woodworking
Power SourceBattery Powered
Voltage8 Volts
Amperage2 Amps
MotorBrushed
Max Torque12 N.M
Chuck Type10MM 3/8'' Keyless Chuck
Charging PortType-C
ColorYellow/Pink
CertificationCE
OriginMainland China
Item Weight3.25 kg
Package Dimensions31 x 26 x 10 cm
Batteries Included?No (Integrated battery in drill)
Batteries Required?No
Battery Cell TypeLithium Ion

8. User Tips

Maximize your tool kit's potential with these helpful tips:

  • Right Tool for the Job: Always select the appropriate tool and bit for the material and task. Using the wrong tool can cause damage to the tool, workpiece, or lead to injury.
  • Safety First: Wear appropriate personal protective equipment (PPE) such as safety glasses, gloves, and hearing protection, especially when using the cordless drill or striking tools.
  • Keep Bits Organized: Utilize the bit holders and storage compartments to keep your drill and screwdriver bits organized and easily accessible.
  • Woodworking Suitability: The DEKO DKMT126 kit is well-suited for various woodworking tasks, from drilling pilot holes to assembling furniture.
  • Brushed Motor: The cordless drill features a brushed motor, which is reliable for general household tasks.

9. Product Demonstration

Watch this video for a visual guide on the DEKO DKMT126 Power Tool Combo Kit's features and usage:

Video 1: DEKO DKMT126 Power Tool Combo Kit Overview and Usage

10. Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the seller's policies or contact the DEKO customer service directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.