1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Tuya WiFi or Zigbee Smart Curtain Switch Module. This module allows you to intelligently control your roller blinds, shutters, or electric motors via the Smart Life APP, voice commands with Alexa or Google Home, and optionally with a remote controller.
Please read this manual carefully before installation and use to ensure proper functionality and safety.
2. Safety Information
- Always turn off the power supply before carrying out any electrical installation work.
- Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Do not expose the device to moisture or extreme temperatures.
- Ensure all connections are secure to prevent short circuits.
- This device is designed for indoor use only.
3. Package Contents
The package for the Curtain Module (QS-WIFI-ECC02 or QS-Zigbee-ECC02) typically includes:
- 1 x Smart Curtain Module (WiFi or Zigbee version)
If you purchased the optional Remote Controller + RF package, it includes:
- 1 x Remote Controller
- 1 x RF Module
- 1 x A23 alkaline battery (12V, 23A)
4. Specifications
| Feature | QS-WIFI-ECC02 | QS-Zigbee-ECC02 |
|---|---|---|
| Input | 100-250VAC, 50/60Hz | 100-250VAC, 50/60Hz |
| Current | 5A | 5A |
| Operation Frequency | 2.4GHz-2.4835GHz Wifi 802.11 b/g/n | 2.4GHz-2.484GHz IEEE 802.15.4 |
| Operation Temperature | -10℃ to +40℃ | -10℃ to +40℃ |
| Operation Ranges | ≤ 200m | ≤ 200m |
| IP Rating | IP20 | IP20 |
| Gateway Required | No | Yes (Zigbee Gateway) |
| Material | ABS+PC | |
| Module Dimensions | 44 x 41 x 25mm (1.73 x 1.61 x 0.98in) | |
Remote Controller (Optional) Specifications:
- Power: 1 x A23 alkaline battery, 12V, 23A (included)
- Remote Controller Dimensions: 94 x 44 x 19mm (3.70 x 1.73 x 0.75in)
- RF Module Dimensions: 27 x 24 x 11mm (1.06 x 0.94 x 0.43in)
- Material: Quality plastics
5. Setup Instructions
5.1 Wiring Instructions and Diagrams
IMPORTANT: Ensure the power supply is turned OFF before proceeding with any wiring.
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram provided below.
- Insert the module into the junction box.
- Turn on the power supply and follow switch module configuration instructions.
Note: Take your smartphone close to the switch module when you're configuring it.

Figure 1: Wiring Diagrams for QS-WIFI-ECC02 (left) and QS-Zigbee-ECC02 (right)
Wiring Key:
- L: Live Wire
- N: Neutral Wire
- M: Motor Wire
- ↑: Motor Up Wire
- ↓: Motor Down Wire
5.2 App Connection and Module Configuration
The smart curtain module works with the Tuya Smart Life APP. Download the app from your smartphone's app store.

Figure 2: Connection Overview for WiFi and Zigbee Modules
- Download and install the "Smart Life" or "Tuya Smart" app on your smartphone.
- Register or log in to your account.
- For QS-WIFI-ECC02 (WiFi Version):
- Ensure your Wi-Fi network is 2.4GHz.
- Open the app, tap '+' to add a device.
- Follow the in-app instructions to connect the module to your Wi-Fi network. No separate gateway is needed for the WiFi version.
- For QS-Zigbee-ECC02 (Zigbee Version):
- A Zigbee gateway (hub) is required for this version. Ensure your Zigbee gateway is already set up and connected to the Smart Life app.
- Open the app, tap '+' to add a device, and select the Zigbee module.
- Follow the in-app instructions to connect the module through your Zigbee gateway.
- Once connected, you can rename the device and assign it to a room within the app.
5.3 Remote Controller Setup (Optional)
If you have the optional remote controller, it typically comes pre-paired with the RF module. Ensure the A23 battery is correctly inserted.

Figure 3: Digital Remote Controller and RF Module
The remote controller can be installed on a wall or table using its bracket for easy access.
6. Operating Instructions
6.1 APP Remotely Control
After successfully connecting the module to the Smart Life APP, you can control your curtains from anywhere.

Figure 4: APP Remotely Control Interface
- Open the Smart Life app.
- Select your curtain module device.
- Use the on/off buttons or percentage slider to control your curtains.
6.2 Timing Function
Automate your curtains with the timing function.

Figure 5: Timing Function Example
- In the Smart Life app, navigate to your curtain module settings.
- Select "Schedule" or "Timer" to set specific times for opening or closing your curtains.
- You can also set countdown timers or use the calendar function for advanced scheduling.
6.3 Family Sharing Function
Share control of your smart curtain module with family members.

Figure 6: Family Sharing Setup
- In the Smart Life app, go to the device settings for your curtain module.
- Look for "Share Device" or "Family Management".
- Invite other family members by entering their Smart Life account details. They will then be able to control the device from their own app.
6.4 Hands-free Voice Control
Integrate your smart curtain module with voice assistants like Amazon Alexa and Google Home.

Figure 7: Voice Control with Alexa and Google Home
- Ensure your Alexa or Google Home device is set up and linked to your Smart Life/Tuya Smart account.
- Use commands such as:
- "Alexa, open the curtains."
- "Hey Google, close the blinds."
- "Alexa, set curtains to 50%."
7. Maintenance
- Keep the module clean and free from dust. Use a dry, soft cloth for cleaning.
- Do not use harsh chemicals or abrasive cleaners.
- Regularly check wiring connections for any signs of wear or looseness.
- For the remote controller, replace the A23 battery when its performance degrades.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Module not responding to app/voice commands. | No power, Wi-Fi/Zigbee disconnected, incorrect wiring. | Check power supply. Verify Wi-Fi/Zigbee connection in the app. Recheck wiring according to diagrams (Figure 1). |
| Curtains move in the wrong direction. | Motor Up/Down wires are swapped. | Turn off power. Swap the Motor Up (↑) and Motor Down (↓) wires. |
| Cannot connect to Wi-Fi (WiFi version). | Incorrect Wi-Fi password, 5GHz network, module too far from router. | Ensure correct 2.4GHz Wi-Fi network and password. Move module closer to router. Reset module and try pairing again. |
| Cannot connect to Zigbee gateway (Zigbee version). | Gateway not powered, module too far from gateway, gateway not in pairing mode. | Ensure Zigbee gateway is powered and connected. Move module closer to gateway. Put gateway into pairing mode as per its instructions. Reset module and try pairing again. |
| Remote controller not working. | Battery drained, not paired with RF module. | Replace the A23 battery. If still not working, refer to the remote controller's specific pairing instructions (if available). |
| How to calibrate the curtain travel limits? | The module itself typically does not handle calibration; this is usually done via the motor or the app's settings. | Check your curtain motor's manual for calibration instructions. Some smart apps allow setting "open" and "close" positions after initial setup. If the motor has physical limit switches, adjust those. |
9. User Tips
- Stable Connection: For optimal performance, ensure your Wi-Fi router or Zigbee gateway is centrally located and within a reasonable range of the curtain module.
- App Exploration: The Smart Life/Tuya Smart app offers many features beyond basic control, such as scene creation, automation based on weather or other smart devices. Explore these options to enhance your smart home experience.
- Voice Command Customization: Most voice assistants allow you to customize phrases for your smart devices. Consider setting up easy-to-remember commands for your curtains.
- Wiring Verification: Double-check all wiring connections before restoring power to prevent damage to the module or motor.
10. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.