1. Introduction and Product Features
This manual provides detailed instructions for the safe and efficient use of your CHANTOWER Pure Sine Wave Power Inverter. Please read this manual carefully before use to ensure correct operation and to prevent damage to the product or connected devices.
Product Features
- Lightweight in size and weight, high in efficiency, low in working noise, and reasonable in design.
- Adopts efficient SPWM Pulse Width Control Technology.
- Incorporates multiple high-tech and intelligent driver chips.
- Features SMT Chip Mounting Technology for precise control, high reliability, and low failure rate.
- High efficiency conversion rate, strong load capacity, and wide application range.
- Multiple intelligent security protections with complete protection functions.

2. Safety Information and Precautions
Requirements for Usage Environment
For safety and optimal performance, the installation environment should meet the following conditions:
- Dry: Do not immerse the inverter in water or expose it to rain.
- Temperature Conditions: Operate in a cool place with a temperature between 0°C and 40°C.
- Space Conditions: Do not use the power inverter in a narrow space. Ensure good ventilation and do not cover the machine during use.
Matters Needing Attention
- When starting inductive loads (e.g., refrigerators, motors), their peak power may exceed the inverter's peak output rate, triggering overload protection. In such cases, turn off all electrical appliances first, then turn on the inverter, and then turn on each appliance one by one, starting with the highest peak electrical appliance.
- During use, if the battery voltage drops (e.g., 10.4-11.0V for a 12V battery), the inverter will sound a buzzing alarm. Turn off sensitive electrical appliances immediately. The inverter will stop outputting current if the voltage drops further (e.g., 9.7-10.3V), and the red indicator light will illuminate.
- If the battery voltage is low, start the vehicle or charge the battery promptly to prevent depletion and impact on battery life.
- Although the inverter has overvoltage protection, exceeding the input voltage (e.g., above 16V for a 12V battery) can still damage the unit.
- After continuous use, the inverter's surface temperature may rise to 60°C. Ensure smooth airflow and keep flammable objects away.
- This power inverter is prohibited for use by minors.
3. Main Components
The CHANTOWER Pure Sine Wave Power Inverter features a robust design with clearly identifiable components for ease of use and maintenance.

- Indicator Light: Green indicates normal operation, Red indicates protection status.
- Universal Shaped Socket: For connecting AC appliances.
- Independent Switch: Power ON/OFF control.
- Input Terminal Positive (Red): Connects to the positive terminal of the DC power source.
- Efficient Cooling Fan: Dissipates heat to maintain optimal operating temperature.
- Input Negative Terminal (Black): Connects to the negative terminal of the DC power source.
4. Setup and Installation
Proper connection is crucial for the safe and effective operation of your inverter. Ensure all connections are secure before powering on.
Direct Connection to Battery (Recommended for higher loads)
Attention: The inverter voltage must be consistent with the battery voltage (e.g., a 12V inverter requires a 12V battery). Multiple batteries can be used in parallel if needed.

- Ensure the inverter switch is in the OFF position.
- Connect the positive and negative poles of the inverter to the corresponding terminals of the battery. Ensure a good, tight connection.
- Before connecting equipment, ensure the inverter switch is closed.
- Connect your equipment to the 110V output socket of the inverter.
- Finally, open the inverter switch.
Connection Method for Car Cigarette Lighters (For loads less than 150W)
Attention: This method is suitable only for power inverters equipped with a car-mounted cigarette lighter model. The cigarette lighter output can only handle electrical appliances with a load of less than 150W. If the load exceeds 150W, use the direct battery connection method.
- Ensure the inverter switch is in the OFF position.
- Plug the inverter's cigarette lighter adapter into the car's cigarette lighter socket.
- Connect electrical appliances (e.g., laptops, small fans) to the inverter's 110V output socket.
- Turn on the inverter switch.
Connection Method for Electric Motorcycle
Attention: The inverter voltage must match the electric motorcycle's battery voltage (e.g., 48V for four batteries, 60V for five batteries). Select an inverter with the same voltage as marked on the electric vehicle.
- Ensure the inverter switch is in the OFF position.
- Connect the special connecting wire for electric motorcycles to the inverter's DC input.
- Connect the other end of the special connecting wire to the electric motorcycle's battery terminals, ensuring correct polarity and a secure connection.
- Connect your equipment to the 110V output socket of the inverter.
- Turn on the inverter switch.
5. Operating Instructions
- Place the inverter switch in the OFF position before connecting it to the battery. Ensure good contact.
- Confirm that the power of all electrical appliances is within the rated power range (50% of the peak power marked by the inverter). The peak power of inductive load electrical appliances should not exceed the inverter's peak power. Then, plug the electrical plug into the 110V output socket of the inverter.
- Turn on the switch of the power inverter. The green indicator light will illuminate, indicating normal operation.
- If the red indicator light illuminates, it indicates that the inverter is turned off due to overvoltage, undervoltage, overload, or overheating.
- If the inverter alarms or shuts down due to the limited output of the vehicle cigarette lighter socket, starting the vehicle or reducing power consumption can restore normal operation.
6. Maintenance
To ensure the longevity and optimal performance of your CHANTOWER Power Inverter, regular maintenance is recommended:
- Cleaning: Periodically clean the exterior of the inverter with a dry, soft cloth. Ensure ventilation openings are free from dust and debris. Do not use liquid cleaners.
- Connections: Regularly check all input and output connections to ensure they are tight and free from corrosion. Loose connections can lead to overheating and inefficient operation.
- Storage: When not in use for extended periods, store the inverter in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Health: Ensure the battery connected to the inverter is well-maintained and charged. A healthy battery is crucial for the inverter's performance.
7. Troubleshooting
This section provides solutions to common problems you might encounter with your power inverter.
| Abnormal Phenomenon | Reason | Resolution Method |
|---|---|---|
| The indicator light is not on, and the electrical appliance is not working. | Malfunction caused by the battery (voltage mismatch). | Check if the battery output voltage matches the inverter's marked voltage. Replace if necessary. |
| Reverse connection of positive and negative poles. | Check battery connection. The inverter may be damaged; replacement or warranty service may be needed. | |
| Poor contact at the wiring. | Check and tighten all connecting wires and terminals. | |
| The indicator light is red, and the electrical appliance is not working. | Electrical appliance power exceeds continuous power (overload shutdown). | Use electrical appliances with power lower than the continuous power of the inverter. |
| Peak power of electrical appliance is too high. | Ensure the peak power of appliances is within the inverter's peak power range. | |
| Battery discharged (alarm). | Charge or replace the battery. | |
| Poor ventilation, causing overheating shutdown. | Turn off, cool for 15 minutes, remove obstructions around fan, place in cool area, reduce load, then restart. | |
| Input voltage too high. | Check the charging system status. | |
| Detected that the output voltage of the power inverter is too low. | Measured output voltage of voltmeter is too low. | Use a 'true RMS multimeter' for accurate output voltage measurement. |
| The power inverter emits a buzzing alarm sound. | Undervoltage or over-temperature protection. | Shorten or use thicker wires for battery connection, lower machine temperature, improve ventilation, reduce load. |
| The power inverter can only be used for low-power appliances. | Current passes through a wire, the voltage decays. | Reduce the length of the wire and use thicker wires. |
| Electrical power consumption is greater than the rated power. | Use a larger capacity battery. | |
| Battery usage time is too short. | Poor or damaged battery health. | Replace the battery. |
| Electricity stored after being fully charged is still insufficient. | The charger cannot fully charge the appliance. Replace it with a better intelligent charger. | |
| Current decays as it passes through a wire. | Reduce the length of the wire and use thicker wires. |
8. Specifications
The following table outlines the main technical parameters for the CHANTOWER Pure Sine Wave Power Inverter:
| Parameter | Value |
|---|---|
| Type | DC/AC Inverters |
| Output Type | SINGLE |
| Output Voltage | 220V |
| Output Frequency | 50Hz |
| Output Current | 4.5A |
| Output Power | >1000KW (Peak Power) |
| Input Voltage | 10-15V / 22-30V / 40-60V / 60-80V (depending on model) |
| Output Waveform | Corrected Sine Wave or Pure Sine Wave |
| Built-in Fuse | 10A / 15A / 20A / 40A / 70A / 120A / 240A (depending on model) |
| Under Voltage Alarm | 10.4-11.0V / 20.5-22V / 42-45V / 54-57V |
| Low Pressure Shutdown | 9.7-10.3V / 19.4-20.6V / 39-42V / 48-52V |
| Overpressure Shutdown | 14.5-15.5V / 29-31V / 58-62V / 74-80V |
| No-load Current | <0.3A |
| Conversion Rate | >90% |
| Weight | 1.5kg (for 2200W model) |
| Size | 35*17*7cm (for 2200W model) |
| Certification | CE |
Note: The inverter has a peak power and a continuous power. The continuous power is typically half of the peak power. For inductive loads (e.g., refrigerators, washing machines, power drills), the inverter's power should be at least three times the appliance's power to function correctly.



9. User Tips
- Power Matching: Always ensure the inverter's continuous power rating is sufficient for your appliances, especially for inductive loads which require significantly more power at startup.
- Battery Voltage: Double-check that your battery's voltage (e.g., 12V) matches the inverter's input voltage requirement to prevent damage.
- Ventilation: Good airflow is critical. Avoid placing the inverter in enclosed spaces or covering its vents to prevent overheating.
- Wiring: Use thick, short wires for connecting the inverter to the battery to minimize voltage drop and maximize efficiency.
- Monitoring: Pay attention to the indicator lights and any alarm sounds. These are crucial for identifying and addressing potential issues promptly.


10. Warranty and Support
This product comes with a three-year warranty. To ensure proper after-sales service, customers must follow the instructions provided when receiving the product.
Warranty Terms
- Product Exchange Application: Accessories must be complete and not affect secondary sales. Missing accessories will incur deductions based on factory price.
- Product Warranty Application: If the machine encounters quality problems without opening or modifying the original packaging, it will be repaired or replaced free of charge. If quality problems arise due to unauthorized opening or modification, maintenance will be charged.
- If the machine casing is excessively dirty, old, or used in harsh environments, resulting in product damage, maintenance will be charged.
- For high-power machine casings that are severely scratched, dirty, or old, they should be returned to the factory for repair. After being repaired within the warranty period, the machine will be returned to the customer in its original condition and repaired free of charge. For machines modified or unpacked without permission, any malfunctions will incur paid maintenance. Contact customer service for specific costs.
- After receiving relevant fees, after-sales service will be promptly handled, and the product delivered to the customer by express delivery.
For detailed warranty claims, returns, or exchanges, please contact customer service to obtain the return address and phone number.
A user manual in PDF format is available for download: View User Manual (PDF)