1. Introduction
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Feixiong FX9630 or FX9706 remote-controlled glider aircraft. These models are designed for recreational use, offering a high-fidelity flying experience with advanced control features. Please read this manual thoroughly before operating your aircraft.
2. Safety Information
⚠️ Disclaimer: For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.
- Always operate the aircraft in open, clear areas, away from people, animals, buildings, and other obstacles.
- Do not fly near airports or restricted airspace.
- Ensure the battery is fully charged and securely installed before each flight.
- Never attempt to catch the aircraft while it is in flight.
- Keep fingers and loose clothing away from the propeller when the aircraft is powered on.
- Adult supervision is recommended for younger operators.
- Do not operate in strong winds or adverse weather conditions.
3. Package Contents
Upon opening the color box, please verify that all the following components are included:
- Aircraft Body (FX9630 or FX9706)
- Main Wing (Host Wing)
- Horizontal Tail Wing
- Remote Control (Handle type)
- 7.4V 650mAh Lipo 20c Lithium Battery
- USB Charger (dedicated with protective board)
- Spare Blade
- User Manual (this document)
- Foam Inner Box (for protection during transport)


4. Specifications
| Feature | Specification |
|---|---|
| Model Numbers | FX9630, FX9706 |
| Aircraft Dimensions | 68 x 52.5 x 20 cm |
| Net Weight (Single Unit) | 240g |
| Material | EPP Foam |
| Motor | 1806 Brushless Motor |
| Battery | 7.4V 650mAh Lipo 20c Lithium Battery |
| Charging Time | Approximately 45 minutes |
| Flight Time | Approximately 10-20 minutes (typically 15 minutes) |
| Remote Control Distance | Approximately 300 meters |
| Control Channels | 6 channels |
| Controller Mode | MODE2 (Handle) |
| Controller Battery | AA (not included) |
| State of Assembly | Almost Ready |
| Operator Skill Level | Beginner, Intermediate |
| Indoor/Outdoor Use | Outdoor |
| Anti-wind Ability | Level 1 |
| Takeoff Total Weight | 0-250g (excluding) |
| Maximum Flight Altitude | Above 120 meters (excluding) |
5. Setup
The aircraft features a removable design for easy storage, meaning some assembly is required before your first flight. While specific detailed steps are typically found in the included quick start guide, here are general assembly instructions:
- Attach Main Wing: Carefully slide the main wing into the designated slot on the aircraft body until it is securely in place. Ensure it is centered and locked.
- Attach Horizontal Tail Wing: Connect the horizontal tail wing to the rear of the aircraft body. Verify it is firmly attached and aligned.
- Install Landing Gear (if applicable): If your model includes detachable landing gear, attach them to the underside of the fuselage.
- Install Battery: Open the battery compartment, connect the fully charged 7.4V 650mAh Lipo battery, and secure it inside. Close the compartment.
- Prepare Remote Control: Insert AA batteries (not included) into the remote control.
- Binding (Pairing): Follow the instructions in your quick start guide to bind the remote control to the aircraft. This usually involves powering on the aircraft first, then the remote, and performing a specific sequence (e.g., moving the throttle stick up and down).


6. Operating Instructions
The Feixiong glider aircraft features a five-channel design controlled by four servo motors, allowing for precise maneuvers. It includes a built-in six-axis gyroscope flight self-stabilization system for easier flight, especially in 6G mode.
6.1 Remote Control Functions (MODE2)
The remote control operates in MODE2, which is a common configuration for RC aircraft. Refer to your quick start guide for a detailed diagram of the remote control layout.
- Left Stick (Throttle/Rudder): Controls throttle (up/down) and rudder (left/right).
- Right Stick (Aileron/Elevator): Controls ailerons (left/right for roll) and elevator (up/down for pitch).
- Channel Switches: Used for activating different flight modes (e.g., 3D/6G) or other auxiliary functions.
6.2 Flight Modes
- 6G Mode (Self-Stabilization): Ideal for beginners. The six-axis gyroscope system automatically stabilizes the aircraft, making it easier to control and maintain level flight.
- 3D Mode: For intermediate pilots, allowing for more aggressive maneuvers and aerobatics. The gyroscope provides less assistance, giving the pilot more direct control.
6.3 Pre-Flight Checklist
- Ensure the aircraft is fully assembled and all connections are secure.
- Check that the aircraft battery is fully charged.
- Verify that the remote control batteries are fresh.
- Perform a range check of the remote control.
- Check all control surfaces (ailerons, elevator, rudder) for proper movement and response to remote control inputs.
- Select an appropriate outdoor flying area, free from obstacles and people.
6.4 Takeoff and Flight
- Place the aircraft on a flat surface, facing into the wind if possible.
- Slowly increase the throttle to gain speed.
- Gently pull back on the elevator stick to lift off.
- Use the aileron and elevator sticks to control direction and altitude. Use the rudder for yaw control.
- Practice gentle turns and altitude changes before attempting more complex maneuvers.
7. Charging and Battery Care
Proper battery care is crucial for safety and longevity.
- Battery Type: 7.4V 650mAh Lipo 20c Lithium Battery.
- Charging: Use only the provided 7.4V USB dedicated charging cable with protective board. Connect the charger to a suitable USB power source (e.g., computer USB port, USB wall adapter).
- Charging Time: Approximately 45 minutes for a full charge. Do not overcharge.
- Usage Time: A fully charged battery provides approximately 10-20 minutes of flight time.
- Safety: Never leave charging batteries unattended. Charge on a non-flammable surface, away from combustible materials. Disconnect the battery from the charger once fully charged.
- Storage: Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures. Do not store fully charged or fully discharged for extended periods.
8. Maintenance
- Cleaning: Wipe the aircraft body with a soft, dry cloth after each use to remove dirt or debris. Avoid using harsh chemicals.
- Propeller Inspection: Regularly check the propeller for any damage (cracks, bends). Replace damaged propellers immediately using the spare blade provided.
- Control Surfaces: Ensure all control surfaces (ailerons, elevator, rudder) move freely and are not obstructed.
- Motor: Keep the brushless motor free from dust and debris. Avoid operating in sandy or dusty environments.
- Storage: When not in use, disassemble the aircraft (main wing, horizontal tail wing) and store it in its original color box or a protective case to prevent damage.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Aircraft does not respond to remote control | Not bound, remote control batteries low, aircraft battery low | Re-bind aircraft and remote. Replace remote batteries. Charge aircraft battery. |
| Short flight time | Battery not fully charged, old battery, flying in strong winds | Ensure full charge. Consider replacing old battery. Avoid flying in strong winds. |
| Aircraft flies erratically or drifts | Control surfaces damaged, gyroscope calibration needed, strong winds | Inspect control surfaces. Recalibrate gyroscope (refer to quick start guide). Fly in calm conditions. |
| Motor not spinning | Battery not connected, motor damaged, ESC issue | Check battery connection. Contact support if motor/ESC is suspected faulty. |
10. User Tips
- Skill Development: Operating this RC aircraft can enhance hand-eye coordination, interactive play, cognitive skill development, and interest cultivation.
- Practice Makes Perfect: Start in 6G (self-stabilization) mode to get accustomed to the controls before attempting 3D mode.
- Wind Awareness: Even with anti-wind ability, flying in calm conditions is recommended for the best experience and to prevent damage.
- Remote Control Method: The aircraft is controlled via a traditional handle-style remote control, offering precise and responsive command over the glider.
11. Warranty and Support
For any issues not covered in this manual, or for further assistance, please refer to the contact information provided by your retailer or the manufacturer. Keep your purchase receipt as proof of purchase for any warranty claims.