1. Introduction
This manual provides essential information for the safe and efficient operation of your Anern Solar Inverter Charger. Please read this manual thoroughly before installation and use, and keep it for future reference. The Anern Solar Inverter Charger is a pure sine wave hybrid inverter designed for off-grid applications, suitable for homes, RVs, solar station systems, and yachts. It features an integrated MPPT solar charge controller and is compatible with various battery types, including lead-acid and lithium batteries.
2. Setup
2.1 Installation Considerations
- Ensure the inverter is installed in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
- Mount the inverter securely on a vertical surface.
- Maintain adequate clearance around the inverter for proper airflow.
2.2 Wiring Diagram
Proper wiring is crucial for safety and optimal performance. Refer to the following diagrams for typical system configurations.
2.3 Battery Connection
The inverter supports both Lead-acid and Lithium batteries. Ensure correct polarity when connecting batteries. The new EVO series hybrid inverter supports automatic activation of lithium batteries, eliminating the need for manual activation through PV and mains power after the lithium battery enters protection mode.
3. Operating Instructions
3.1 LCD Display and Modes
The inverter features an LCD display for easy monitoring and touch buttons for seamless mode switching. It has three main operating modes:
- Battery Mode: Indicated by a red light on the RGB status display.
- Utility Mode: Represented by a blue light.
- PV Mode: Denoted by a purple light.
3.2 Dual AC Output Function (AN-FGI-AS3600)
The AN-FGI-AS3600 model features an exclusively developed dual AC output interface, significantly improving the efficiency of the entire solar power system. This function comprises two distinct power outputs designed for different purposes:
- Main Output: Used to connect loads with higher rated power (e.g., washing machine, refrigerator).
- Secondary Output: Used to connect more important loads with less rated power (e.g., lamps, fans, TVs, water pumps).
When the battery power is low (e.g., below 44%, configurable), the inverter will retain the output of the secondary load and disconnect the main load. This extends the operation time of critical secondary loads.
3.3 WIFI Monitoring
The inverter supports WIFI wireless monitoring, allowing users to conveniently monitor and check the inverter's operating status remotely via Anern's own mobile app (available for iOS and Android). This ensures effortless communication and control.
4. Maintenance
- Regularly inspect all connections for tightness and corrosion.
- Keep the inverter's ventilation openings clear of dust and debris to ensure proper cooling.
- Clean the exterior of the inverter with a dry cloth. Do not use liquid cleaners.
- Check battery terminals for corrosion and clean if necessary.
- Ensure the inverter is powered off before performing any maintenance.
5. Troubleshooting
The inverter is equipped with multiple protection features to ensure safe operation. If an issue occurs, check the LCD display for error codes or status indicators.
5.1 Protection Features
5.2 Common Issues
- No Power Output: Check battery connections, input voltage from solar panels/utility, and ensure the inverter is switched on.
- Overload Warning: Reduce the connected load. The dual AC output feature on AN-FGI-AS3600 can help manage loads by prioritizing essential ones.
- Overheating: Ensure proper ventilation and clear any obstructions from the cooling fans.
- Battery Not Charging: Verify solar panel connections, MPPT controller operation, and battery health.
6. Specifications
6.1 General Specifications
| Attribute | Value |
|---|---|
| Brand Name | ANERN |
| Model Number | AN-SCI-ECO/AN-FGI-AS3600 |
| Output Current | 80A/120A |
| Output Power | 1 - 200 KW |
| Size | 490*355*200mm |
| Output Type | DUAL |
| Weight | 11KG |
| Output Frequency | 50HZ/60HZ |
| Is Smart Device | Yes |
| Origin | Mainland China |
| Certification | CE, RoHS |
6.2 Detailed Specifications (AN-SCI-ECO-3200)
| Parameter | AN-SCI-EVO-2000 | AN-SCI-EVO-3200 |
|---|---|---|
| Rated Power | 2000KVA/1600W | 3200KVA/3000W |
| AC INPUT | ||
| Voltage | 230VAC | |
| Selectable Voltage Range | 170-280VAC (For Personal Computers) | 90-280VAC (For Home Appliances) |
| Frequency Range | 50 Hz/60Hz (Auto sensing) | |
| AC OUTPUT | ||
| AC Voltage Regulation | 230VAC ±5% | |
| Surge Power | 4000VA | 6400VA |
| Efficiency (Peak) PV to INV | 98% | |
| Efficiency (Peak) Battery to INV | 94% | |
| Transfer Time | 10 ms (For Personal Computers) | 20 ms (For Home Appliances) |
| Waveform | Pure Sine Wave | |
| BATTERY & AC CHARGER | ||
| Battery Voltage | 12VDC | 24VDC |
| Floating Charge Voltage | 13.5VDC | 27VDC |
| Overcharge Protection | 16VDC | 33VDC |
| Maximum AC Charge Current | 60A | |
| SOLAR CHARGER | ||
| Maximum PV Array Power | 2000W | 3000W |
| MPPT Range @ Operating Voltage | 30-400VDC | |
| Maximum PV Array Open Circuit Voltage | 400VDC | |
| Maximum Charging Current | 80A | |
| PHYSICAL | ||
| Dimension, D*W*H(mm) | 360*270*100mm | 390*270*100mm |
| Net Weight (kgs) | 4.4 | 5.4 |
| OPERATING ENVIRONMENT | ||
| Humidity | 5% to 95% Relative Humidity (Non-condensing) | |
| Operating Temperature | -10°C to 50°C | |
| Storage Temperature | -15°C to 60°C | |
6.3 Detailed Specifications (AN-FGI-AS3600)
| MODEL | 3.6KW | 6.2KW |
|---|---|---|
| Charging Algorithm | 3-Step | |
| AC Charging Current (Max) Voltage | 80Amp | 230VAC |
| Bulk Charging Voltage (Flooded Battery) | 29.2 | 58.4 |
| Bulk Charging Voltage (AGM/Gel Battery) | 28.2 | 56.4 |
| Floating Charge Voltage | 27Vdc | 54Vdc |
| Maximum PV Array Power | 4200W | 6500W |
| Nominal PV Voltage | 240Vdc | 360Vdc |
| Maximum PV Array MPPT Voltage Range | 60Vdc~500Vdc | |
| Max.PV Array Open Circuit Voltage | 500Vdc | |
| Max Charging Current (AC charging plus solar charger) | 120Amp | |
| Nominal Output Current | 100/105/110/115/120VAC | |
| Feed-in Grid Voltage Range | 90~150VAC | |
| Nominal Output Current | 30A | 51.7A |
| Maximum Conversion Efficiency (DC/AC) | 97% | |
| Safety Certification | CE | |
| Operating Temperature Range | -10°C to 50°C | |
| Storage Temperature | -10°C to 60°C | |
| Humidity | 5% to 95% Relative Humidity (Non-condensing) | |
| Dimension. H*W*D(mm) | 110*334*423 | |
| Net Weight (kgs) | 9 | 10 |
7. User Tips
- Lithium Battery Activation: The EVO series inverters feature automatic activation for lithium batteries, simplifying setup.
- Battery-Free Operation: This inverter can operate without a battery, reducing the initial cost of solar systems.
- Remote Monitoring: Utilize the Anern mobile app (iOS & Android) for convenient remote monitoring of your inverter's status via WiFi.
- Load Management (Dual AC Output models): For models with Dual AC Output, connect high-priority loads to the secondary output to ensure they remain powered longer during low battery conditions.
- Wide PV Input Voltage: The wide PV input voltage range (60VDC-450VDC) allows for flexible configuration of your solar energy system.
8. Warranty & Support
Anern provides a 2-year warranty for this product. For technical support, troubleshooting assistance, or warranty claims, please contact Anern Energy Store directly. Refer to the official Anern website for detailed support information.