Maxto M6S Motorcycle Bluetooth Intercom User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Maxto M6S Motorcycle Bluetooth Intercom. Please read this manual thoroughly before using the device to ensure proper function and safety.

Product Features

• 8-Person Intercom with 500-1000 Meters Maximum Distance
• Automatic Networking Protocol for easy group communication
• Music Stereo One-Click Sharing
• Automatic Answering of incoming calls after 15 seconds
• FM Radio with Memory Function (up to 6 stations)
• Multi-Channel Mixing (listen to music while talking on phone without interruption)
• Voice Control for phone assistant functions
• Intelligent Noise Reduction (DSP high-speed computing, CVC algorithm)
• Ultra-Long Battery Life (200 hours standby, 15 hours working, 2.5 hours charging)
• Waterproof IP67 Rating
• Qualcomm Dual Chip for stable connection and powerful performance
• Oversized Rotary Knob for convenient operation
• Suitable for various helmet types: Modular, Motocross, Open face, Full Face, Flip Up Helmet, Universal
• HIFI Sound Quality with powerful sound units and DSP audio processor

Package Contents

Before installation, please verify that all items are present in your package:

Image: Contents of the Maxto M6S package, including the M6S unit, box, clip, screwdriver, data cable, adhesive seat, headphones & microphone, speaker Velcro, and manual.

• Maxto M6S Intercom Unit
• Mounting Clip
• Screwdriver
• USB Data Cable
• Adhesive Mount
• Headphones & Microphone Set
• Speaker Velcro Pads
• User Manual (this document)

Setup and Installation

The Maxto M6S is designed to be compatible with various helmet types. Follow these steps for proper installation:

1. Choose Mounting Location

Select a suitable location on your helmet, typically on the left side, where the intercom unit will not obstruct your vision or movement. The unit is suitable for full face, flip-up, off-road, modular, open face, and universal helmets.

Image: Diagram showing various helmet types (Integral, Retro Helmet, Rally Helmet, Off-road Helmet) compatible with the intercom unit.

2. Install Mounting Bracket

• Clip Mount: Slide the clip mount between the helmet shell and the inner padding. Secure it firmly.
• Adhesive Mount: Clean the chosen area on the helmet surface. Peel off the protective film from the adhesive mount and firmly press it onto the helmet for at least 30 seconds. Allow sufficient time for the adhesive to cure before attaching the intercom unit.

3. Attach Intercom Unit

Slide the Maxto M6S unit onto the installed mounting bracket until it clicks securely into place.

4. Install Speakers and Microphone

• Place the speakers inside the helmet's ear pockets using the provided Velcro pads. Ensure they are positioned directly over your ears for optimal sound quality.
• Attach the microphone to the inside of the helmet, near your mouth, ensuring it is not obstructed and can pick up your voice clearly. Route the cables neatly under the helmet padding.
• Connect the speaker and microphone cables to the corresponding ports on the Maxto M6S unit.

5. Initial Charging

Before first use, fully charge the device using the provided USB data cable. The charging time is approximately 2.5 hours.

Operating Instructions

Power On/Off

• Power On: Press and hold the power button (usually the main button or rotary knob) until the indicator light turns on.
• Power Off: Press and hold the power button until the indicator light turns off.

Bluetooth Pairing (for Phone/GPS)

1. Ensure the M6S is powered off.
2. Press and hold the power button until the indicator light flashes rapidly, indicating pairing mode.
3. On your phone or GPS device, enable Bluetooth and search for "Maxto M6S" (or similar).
4. Select the device to pair. Once paired, the indicator light will change.

Intercom Modes and Networking

The Maxto M6S supports multiple intercom modes and features an automatic networking protocol.

Image: Diagram illustrating three intercom modes: Two-person Intercom Mode, Friends Mode (private, specify friends), and Make Friends Mode (search and auto-connect within range).

• Automatic Networking: The device features a one-click start for automatic grouping and reorganization. If you leave the team and return, it will automatically reconnect.
• Two-person Intercom Mode: Two riders can pair directly to communicate.
• Friends Mode: A private mode allowing you to specify friends to join your intercom group.
• Make Friends Mode: Search for other M6S devices in the same mode within the effective range and automatically connect.

Video: Demonstrates the automatic networking protocol and multiple intercom modes, showing how multiple riders can connect and communicate seamlessly.

Music Sharing

Share your music with another rider with a single touch.

Image: Illustration of two riders sharing music wirelessly between their intercom units.

Automatic Answering

The device will automatically answer incoming phone calls after 15 seconds, allowing for hands-free communication.

Image: A rider on a motorcycle with a phone call notification on their screen, indicating the automatic answering feature.

FM Radio

The built-in FM radio allows you to listen to your favorite stations. It supports saving up to 6 stations.

Image: A rider on a motorcycle with a radio frequency display, highlighting the FM radio and memory function.

Multi-Channel Mixing

With dual DSP independent audio decoding, you can listen to music while talking on the phone. The phone conversation will not interrupt your team's intercom conversation.

Image: Two riders on motorcycles, with icons indicating simultaneous music playback and intercom communication, demonstrating multi-channel mixing.

Voice Control

Activate your phone's voice assistant (e.g., Siri) to control various phone functions hands-free.

Image: A rider on a motorcycle with a smartphone screen showing a voice assistant interface, illustrating the voice control function.

Using the Oversized Rotary Knob

The large rotary knob is designed for easy operation even with gloves. It can be used for multiple functions such as volume control, track skipping, and menu navigation.

Image: A hand (robotic) demonstrating the rotation of the oversized rotary knob on the intercom unit, highlighting its ease of use for riding operations.

Maintenance

• Cleaning: Use a soft, damp cloth to clean the exterior of the intercom unit. Do not use harsh chemicals or abrasive cleaners.
• Water Resistance: The Maxto M6S is IP67 waterproof, meaning it is protected against dust and can withstand immersion in water up to 1 meter for 30 minutes. However, avoid prolonged submersion and ensure all ports are securely closed before exposure to water.


Image: The Maxto M6S unit being splashed with water, illustrating its IP67 waterproof rating.

• Storage: Store the device in a cool, dry place when not in use. If storing for an extended period, charge the battery periodically to maintain its health.
• Battery Care: The device features ultra-low power management. For optimal battery life, avoid fully discharging the battery frequently.

Troubleshooting

• Device not powering on: Ensure the battery is charged. Connect to a power source and try again.
• Cannot pair with phone: Make sure the M6S is in pairing mode (rapidly flashing indicator light) and your phone's Bluetooth is enabled. Try restarting both devices.
• Intercom connection issues: Ensure all devices are within the 500-1000m range and are in the correct intercom mode. If a rider leaves the group, the device should automatically reconnect upon return.
• Poor sound quality/noise: Check speaker and microphone placement. Ensure the microphone is close to your mouth and not obstructed. The intelligent noise reduction feature (DSP, CVC algorithm) should minimize ambient and wind noise.


Image: Diagram showing the internal components and sound wave processing, illustrating the DSP high-speed computing and CVC algorithm for intelligent noise reduction.

• Intercom with other brands: The Maxto M6S uses its own automatic networking protocol. While it supports standard Bluetooth connections for phones, direct mesh intercom compatibility with other brands like Cardo or Sena is not explicitly stated and may not be supported.

Specifications

Image: Diagram showing the dimensions of the Maxto M6S unit (19.8cm length, 14.3cm width).

Image: A close-up view of the Maxto M6S intercom unit.

Warranty and Support

The Maxto M6S comes with a 365-day free replacement policy, ensuring peace of mind for your purchase.

For any issues or support, please refer to the contact information provided with your purchase or visit the official Maxto support website.

User Tips

• Intercom with other brands: While the M6S offers robust group intercom features, its automatic networking protocol is designed for Maxto devices. Compatibility with mesh systems from other brands like Cardo or Sena is not guaranteed. For mixed-brand communication, standard Bluetooth pairing for phone calls might be the only option.
• Optimal Sound: Ensure speakers are directly over your ears and the microphone is positioned to minimize wind noise for the best audio experience.
• Rotary Knob: Utilize the oversized rotary knob for quick adjustments while riding, as it's designed for easy manipulation even with gloves.