Introduction
The NEOHIPO ET30 is a versatile 2-in-2-out amplifier/speaker switcher designed for audiophiles with multiple amplifiers or speaker sets. It features dual analog VU meters that dynamically decorate your audio environment and provide visual feedback on audio signals. Its robust metal shell and retro design, complemented by a warm yellow backlight, offer both aesthetic appeal and high functionality.
This device allows for easy switching between two amplifiers and two pairs of speakers, eliminating the need for repeated cable plugging and unplugging, which can prevent wear on your equipment's connection points. The ET30 incorporates a fully isolated design for all channels, ensuring independent grounding (GND) without mutual interference. This design supports various amplifier types, including BTL, Class A, Class AB, Class B, Class D digital amplifiers, and tube amplifiers, without impacting your existing HIFI system.

Figure 1: NEOHIPO ET30 Amplifier Speaker Selector with remote control.
Product Overview
The NEOHIPO ET30 features a user-friendly front panel with controls for amplifier and speaker selection, VU meter adjustments, and lighting effects. The rear panel provides clear connections for your audio equipment.

Figure 2: Front and Rear Panel Overview with labeled controls and ports.
Front Panel Controls:
- Power Switch/Sound Reception Mode: Toggles power and switches between wired and MIC sound reception modes.
- Amplifier Selection (AMP): Selects between Amplifier A and Amplifier B.
- Speaker Selection (SPK): Selects between Speaker 1 and Speaker 2.
- COLOR/LIGHT Knob:
- Click to switch light brightness (4 levels, can be turned off).
- Rotate to change the light color (34 colors available).
- Hold for 2 seconds to enter/exit Multicolor Transition Mode.
- SWING RANGE Knob: Adjusts the VU meter pointer jump range.
- SENSITIVITY Knob: Adjusts the VU meter pointer backward speed.
Rear Panel Connections:
- Speaker Outputs (1 & 2): Banana female jacks for connecting two pairs of speakers.
- Amplifier Inputs (A & B): Banana female jacks for connecting two amplifiers.
- MIC: Built-in microphone for ambient sound reception in MIC mode.
- DC 5V (USB Type-C): Power input port.
Setup
Before connecting your NEOHIPO ET30, ensure all audio equipment is powered off.
- Connect Speakers: Connect your first pair of speakers to the "SPEAKER 1" banana female jacks on the rear panel. Connect your second pair of speakers to the "SPEAKER 2" banana female jacks. Ensure correct polarity (positive to positive, negative to negative).
- Connect Amplifiers: Connect your first amplifier to the "AMPLIFIER A" banana female jacks on the rear panel. Connect your second amplifier to the "AMPLIFIER B" banana female jacks. Ensure correct polarity.
- Power Connection: Connect the provided Type-C USB cable to the "DC 5V" port on the rear panel and plug the other end into a 5V (above 1A) USB power adapter (not included).
- Initial Power On: Press the Power Switch on the front panel to turn on the device. The VU meters will illuminate.
The ET30 is designed with amplifier no-load protection, supporting various amplifier types including BTL, Class A, Class AB, Class B, Class D digital, and tube amplifiers.

Figure 3: Example setup with NEOHIPO ET30 connected to amplifiers and speakers.
Operating Instructions
The NEOHIPO ET30 can be operated using the front panel controls or the included remote control.
Basic Operation:
- Power On/Off: Press the Power Switch on the front panel (labeled "Power Switch/Sound Reception Mode" in Figure 2) or the 'On-Off' button (1) on the remote control.
- Amplifier Selection: Press the "AMP" button on the front panel or the 'Amplifier Selection Button' (8) on the remote to toggle between Amplifier A and Amplifier B.
- Speaker Selection: Press the "SPK" button on the front panel or the 'Speaker Selection Button' (9) on the remote to toggle between Speaker 1 and Speaker 2.
VU Meter and Lighting Controls:

Figure 4: VU Meter with adjustable colors and brightness.
- Light Brightness Adjustment: Click the "COLOR/LIGHT" knob on the front panel or use the 'Brightness Increase' (3) and 'Brightness Decrease' (7) buttons on the remote. There are 4 levels of brightness, and the backlight can be turned off.
- Light Color Change: Rotate the "COLOR/LIGHT" knob on the front panel or use the 'Reverse Switching of Light Colors' (4) and 'Switching the Order of Light Colors' (6) buttons on the remote. There are 34 colors available.
- Multicolor Transition Mode: Hold the "COLOR/LIGHT" knob on the front panel for 2 seconds to enter or exit the multicolor transition mode. Alternatively, use the 'Colorful Light Transformation Mode Switch' (5) button on the remote.
- VU Meter Pointer Jump Range Adjustment: Adjust the "SWING RANGE" knob on the front panel.
- VU Meter Pointer Backward Speed Adjustment: Adjust the "SENSITIVITY" knob on the front panel.
- Pointer Jump Mode Selection: Use button (10) on the remote. The VU meter flashes once to enter M Mode, and flashes twice to enter D Mode.
- Fixed Light Modes: Use buttons (11) and (12) on the remote for Fixed Light Mode 1 and Fixed Light Mode 2 respectively.
Sound Reception Modes:

Figure 5: NEOHIPO ET30 showing MIC/Wired Mode indicator.
- MIC Mode: When the light next to "MIC" is on, the VU meter pointer jumps according to the ambient sound detected by the built-in microphone. This can be activated by pressing the "Sound Reception Mode Selection Button" (2) on the remote.
- Wired Connection Mode: When the light next to "MIC" is off, the VU meter responds to the audio signal passing through the connected amplifiers and speakers.
All settings are saved after shutdown for convenience.
Remote Control Overview:

Figure 6: Labeled remote control with functions.
- On-Off
- Sound Reception Mode Selection Button
- Brightness Increase
- Reverse Switching of Light Colors
- Colorful Light Transformation Mode Switch
- Switching the Order of Light Colors
- Brightness Decrease
- Amplifier Selection Button
- Speaker Selection Button
- Pointer Jump Mode Selection: The VU Meter Flashes Once to Enter M Mode, and The VU Meter Flashes Twice to Enter D Mode
- Fixed Light Mode 1
- Fixed Light Mode 2
Specifications
| Feature | Detail |
|---|---|
| Audio Input/Output | 2 groups of banana female jacks |
| Working Mode | 2-IN-1-OUT / 1-IN-2-OUT |
| Supported Amplifier Types | BTL, Class A, Class AB, Class B, Class D digital amp, tube amp, etc. |
| Max. Through Power per Channel | 300W (actual) |
| Backlight Brightness Adjustment | 4 levels (can be turned off) |
| VU Meter Colors | 34 Colors |
| Amplifier No-Load Protection | Supported |
| Remote Control Function | Supported |
| Settings Saved After Shutdown | Supported |
| Working Voltage | DC 5V (above 1A) |
| Power Interface | Type-C |
| Diameter of VU Meter | 85*45mm |
| Dimensions (W*D*H) | 281*124*80mm / 11*4.88*3.2in |
| Net Weight | 1350g / 2.98lb |
What's in the Box
The NEOHIPO ET30 package includes the following items:
- Neohipo ET30 Amplifier Speaker Switcher x1
- Remote Control x1 (Note: Batteries are not included)
- Type-C USB Cable x1 (Note: A 5V charger is not included)
- User Manual x1

Figure 7: Package contents of the NEOHIPO ET30.
User Tips
- Input/Output Type: The ET30 uses speaker-level inputs and outputs, designed to switch between amplifiers and speakers directly. It is not a line-level device.
- Amplifier Compatibility: The device is compatible with a wide range of amplifier types, including tube amplifiers, thanks to its fully isolated design and amplifier no-load protection. This ensures safe operation across different audio setups.
- Power Handling: Each channel can handle a maximum of 300W. Ensure your amplifiers and speakers do not exceed this power rating for optimal performance and safety.
- VU Meter Customization: Experiment with the 34 color options and 4 brightness levels of the VU meters to match your audio setup's aesthetic or your personal preference. The multicolor transition mode can add a dynamic visual element.
- Remote Control Convenience: Utilize the remote control for convenient operation from a distance, especially for switching between amplifiers/speakers and adjusting VU meter lighting.
Troubleshooting
- No Power:
- Ensure the Type-C USB cable is securely connected to the "DC 5V" port and a working 5V (above 1A) USB power adapter.
- Verify the power adapter is plugged into a live power outlet.
- Press the Power Switch on the front panel or the 'On-Off' button on the remote.
- No Sound Output:
- Check all banana plug connections for tightness and correct polarity (positive to positive, negative to negative).
- Ensure the correct amplifier (A or B) and speaker pair (1 or 2) are selected using the front panel buttons or remote.
- Verify that your amplifier is powered on and receiving an audio signal.
- Confirm that your speakers are properly connected and functional.
- VU Meters Not Responding:
- Check the sound reception mode. If the "MIC" light is on, the meters respond to ambient sound. If it's off, they respond to the wired audio signal. Switch modes if necessary.
- Adjust the "SWING RANGE" and "SENSITIVITY" knobs on the front panel to see if the meter response changes.
- Ensure there is an active audio signal being played through the selected amplifier/speakers or ambient sound if in MIC mode.
- Remote Control Not Working:
- Ensure batteries are inserted correctly and are not depleted. (Note: Batteries are not included with the remote).
- Point the remote directly at the ET30's front panel.
- Check for any obstructions between the remote and the device.
Warranty and Support
The NEOHIPO ET30 comes with an 18-month warranty from the date of shipment. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover items damaged due to misuse, accidental damage, unauthorized modifications, or normal wear and tear.
For any inquiries, technical assistance, or warranty claims, please contact NEOHIPO customer support. Our team of well-trained and professional sales and after-sale service personnel, fluent in English, will respond to your queries in detail within 24 hours and assist you in resolving any issues.
Please retain your proof of purchase for warranty validation.
Product Demonstration Video
Watch this video for a visual guide on the features and operation of the NEOHIPO ET30 Amplifier Speaker Selector.
Video: NEOHIPO ET30 Product Demonstration.