EASUN POWER Pure Sine Wave Inverter

Contents

EASUN Pure Sine Wave Inverter User Manual

Models: 3000W & 4000W

1. Introduction

Thank you for choosing the EASUN Pure Sine Wave Inverter. This device is designed to convert DC power from your battery (12V, 24V, 48V, or 60V) into stable AC 220V power, suitable for a wide range of household and outdoor electrical appliances. Featuring a pure sine wave output, intelligent protection systems, and a smart cooling fan, this inverter ensures efficient and reliable power conversion. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance.

EASUN Pure Sine Wave Inverter front view

Figure 1: EASUN Pure Sine Wave Inverter (Example 4000W model)

2. Safety Instructions

Please observe the following safety precautions to prevent injury and damage to the inverter or connected devices:

  • Ensure the inverter is installed in a well-ventilated, dry, and cool environment, away from direct sunlight, heat sources, and flammable materials.
  • Do not expose the inverter to water, rain, or excessive moisture.
  • Verify that the input DC voltage of the inverter matches your battery's voltage (12V, 24V, 48V, or 60V). Using the wrong input voltage will prevent the inverter from working and may cause damage.
  • Always connect the inverter to the battery using the provided thick battery lines and clips.
  • When using the cigarette lighter wire in a car, do not exceed 300W for 12V cars or 400W for 24V trucks. For higher power loads, connect directly to the battery terminals.
  • Ensure all connections are tight and secure to prevent overheating and arcing.
  • Do not open the inverter casing. There are no user-serviceable parts inside. Refer servicing to qualified personnel.
  • Keep children and unauthorized persons away from the inverter during operation.
  • Disconnect the inverter from the battery before performing any maintenance or cleaning.

3. Package Contents

Upon opening the package, please ensure all items are present and in good condition:

  • 1 x EASUN Pure Sine Wave Inverter (3000W or 4000W model)
  • 1 x English User Manual (this document)
  • 1 x Certificate of Conformity
  • 1 x Battery Thick Line (Red for positive, Black for negative)
  • 1 x Battery Clip Set

4. Specifications

The following table outlines the technical specifications for the EASUN Pure Sine Wave Inverter models:

Feature3000W Model4000W Model
TypePure Sine Wave Inverter
Output Voltage WaveformPure Sine Wave
Peak Power3000W4000W
Continuous Power1500W2000W
Input VoltageDC 12V / 24V / 48V / 60V (selectable model)
Output VoltageAC 220V
Output Frequency50Hz / 60Hz (selectable)
Socket TypeUniversal
Conversion EfficiencyUp to 95%
Dimensions (L×W×H)28cm × 15cm × 7cm33cm × 15cm × 7cm
Net Weight2.55kg2.95kg
CertificationCE

Table 1: Inverter Specifications

Table of specifications for 3000W and 4000W inverter models

Figure 2: Detailed Specifications Table

5. Setup Instructions

Follow these steps to properly set up your EASUN Pure Sine Wave Inverter:

  1. Choose a Location: Select a cool, dry, and well-ventilated area for the inverter. Ensure there is sufficient space around the unit for airflow, especially around the cooling fans.
  2. Prepare the Battery: Ensure your battery is fully charged and matches the input voltage of your inverter (e.g., 12V battery for a 12V inverter).
  3. Connect to Battery (Primary Method):
    • Identify the positive (+) and negative (-) terminals on both the inverter and your battery.
    • Using the provided thick battery lines, connect the red cable to the positive (+) terminal of the inverter and then to the positive (+) terminal of the battery.
    • Connect the black cable to the negative (-) terminal of the inverter and then to the negative (-) terminal of the battery.
    • Ensure all connections are tight and secure. Loose connections can cause overheating and damage.
  4. Connect to Car Cigarette Lighter (Low Power Loads Only):
    • For low-power applications (e.g., charging small electronics), you may use a cigarette lighter adapter (if provided or purchased separately).
    • IMPORTANT: Do not exceed 300W for 12V car systems or 400W for 24V truck systems when using the cigarette lighter connection. Exceeding this limit will blow the car's fuse. For higher power loads, always connect directly to the battery as described in step 3.
  5. Power On: Once the DC input is securely connected, switch on the inverter using the power button. The LED display will illuminate, showing the input and output voltages.
  6. Connect AC Appliances: Plug your AC appliances into the universal output sockets on the inverter.
Diagram showing battery connected to inverter and then to a load

Figure 3: Inverter Working Principle Diagram

3000W inverter with battery clips and cigarette lighter adapter for connection

Figure 4: Inverter with Connection Accessories

6. Operating Instructions

Your EASUN Pure Sine Wave Inverter is designed for ease of use and reliability:

  • Pure Sine Wave Output: This inverter produces a pure sine wave output, which is identical to the power supplied by the utility grid. This makes it safe and suitable for all types of electrical appliances, including sensitive electronics and inductive loads like refrigerators, freezers, and induction cookers, without causing interference.
  • LED Display: The integrated LED display provides real-time information on the input DC voltage and output AC voltage, allowing you to monitor the inverter's status.
  • Intelligent Protection System: The inverter features an 8-bit intelligent protection system controlled by an intelligent chip, offering comprehensive safety for both the inverter and your appliances. Protections include:
    • Overload Protection
    • High Voltage Protection
    • Low Voltage Protection
    • Overheating Protection
    • Reverse Connection Protection
    • Short Circuit Protection
    • Overcurrent Protection
    • Insurance Protection
  • Smart Fan Design: The inverter incorporates an intelligent temperature-controlled fan. This fan operates quietly and only activates when the internal temperature reaches or exceeds 45°C, ensuring efficient cooling and extending the lifespan of components. Below 45°C, the fan remains off.
  • Buzzer Reminder: In the event that any of the protection mechanisms are triggered, the inverter will automatically disconnect the power supply to the load and emit an audible buzzer sound to alert you to the issue.
Inverter powering various household appliances like printer, rice cooker, air conditioning, TV, electric light, and computer

Figure 5: Inverter Application Examples

Illustration of the smart fan design and airflow within the inverter

Figure 6: Smart Fan Design

7. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your inverter:

  • Cleaning: Periodically clean the exterior of the inverter with a soft, dry cloth. Ensure the cooling vents are free from dust and debris to maintain proper airflow. Do not use liquid cleaners or solvents.
  • Connection Check: Regularly inspect all DC input and AC output connections to ensure they are tight and free from corrosion. Loose connections can lead to power loss and overheating.
  • Battery Health: Monitor the health of your battery. A well-maintained battery will provide stable power to the inverter.
  • Storage: If storing the inverter for an extended period, disconnect it from the battery and store it in a cool, dry place.

8. Troubleshooting

If you encounter issues with your inverter, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Inverter does not turn on / No outputIncorrect input voltage selected
Loose battery connections
Battery voltage too low/high
Inverter switch is OFF
Ensure inverter input voltage matches battery voltage.
Check and tighten all battery cable connections.
Check battery voltage; recharge or replace if necessary.
Turn the inverter switch to ON.
Buzzer sounds / Inverter shuts downOverload protection triggered
High/Low voltage protection
Overheating protection
Short circuit detected
Reduce the load connected to the inverter.
Check battery voltage; ensure it's within operating range (10.5-15V for 12V, 20-30V for 24V).
Ensure proper ventilation; allow inverter to cool down.
Disconnect all loads and check for short circuits in wiring or appliances.
Connected appliance not workingAppliance power exceeds inverter's continuous power
Appliance fault
Loose AC connection
Ensure the appliance's power consumption is within the inverter's continuous power rating.
Test the appliance with a standard AC outlet.
Check the AC plug connection to the inverter.
Car fuse blows when using cigarette lighterLoad exceeds 300W (12V car) or 400W (24V truck)Reduce the load or connect the inverter directly to the car battery terminals for higher power needs.

Table 2: Troubleshooting Guide

9. User Tips

Here are some practical tips for getting the most out of your EASUN Pure Sine Wave Inverter:

  • Match Inverter to Battery: Always double-check that the inverter's input voltage (12V, 24V, etc.) perfectly matches your battery's voltage. A mismatch will prevent operation.
  • Consider Continuous vs. Peak Power: While the inverter has a high peak power rating for starting motors, ensure your regular appliances' total wattage stays within the continuous power rating for stable, long-term operation.
  • Ventilation is Key: Good airflow around the inverter is crucial, especially when running high-power appliances, to prevent the overheating protection from activating.
  • Battery Capacity: For extended use, pair your inverter with a battery of adequate capacity (Ah) to meet your power demands.

10. Warranty and Support

The EASUN Pure Sine Wave Inverter is CE certified, indicating compliance with European safety, health, and environmental protection requirements.

For any technical assistance, warranty claims, or support inquiries, please contact your original point of purchase or the EASUN POWER customer service. Please have your product model and purchase details ready when contacting support.

© 2023 EASUN POWER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.