WAYXIN T2 Motorcycle Helmet Headset Bluetooth Intercom

Introduction

The WAYXIN T2 is a high-quality motorcycle helmet headset designed for clear, hands-free communication between two riders. Featuring advanced Bluetooth 5.0 technology, DSP & CVC noise reduction, and a waterproof design, it ensures reliable performance in various riding conditions. This manual provides essential information for setup, operation, maintenance, and troubleshooting to help you get the most out of your device.

Main Features

• High-Quality Communication: Designed for 2 riders, enabling clear, hands-free intercom communication.
• Advanced Bluetooth 5.0: Equipped with the latest BT5.0 technology for stable connection, lower power consumption, and extended range.
• Waterproof Design: Built to withstand rain and splashes, ensuring reliable performance in various weather conditions (IP67).
• Easy Installation: Easily mounts onto most full-face and open-face motorcycle helmets using two provided methods.
• Multifunctional: Supports intercom, music streaming from your smartphone, and hands-free phone calls.
• Qualcomm Bluetooth Chip: Utilizes an advanced Qualcomm chip for powerful performance and smooth operation.
• Double Intelligent Noise Reduction: Features DSP and CVC noise reduction processing to minimize car, wind, and environmental noise.
• Automatically Answer Calls: Automatically answers incoming calls after 3 seconds, requiring no manual operation while riding.
• Type-C Fast Charging: Equipped with a durable Type-C charging interface.
• 40MM Ultra-Thin High-Quality Speaker: Provides high-definition calls and stereo sound effects.
• Smart Connection: Can connect with two Bluetooth devices simultaneously, allowing seamless switching between devices for gaming or phone calls.

Overview of WAYXIN T2 headset and its core features.

The headset supports activating phone voice assistants like Siri or Google Assistant.

Illustration of DSP and CVC noise reduction technology.

Diagram highlighting the Qualcomm Bluetooth 5.0 chip.

The WAYXIN T2 is designed with IP67 waterproof rating.

Package Contents

The WAYXIN T2 package includes the following components:

• 1 x WAYXIN T2 Bluetooth Intercom Unit (or 2 units for a double pack)
• 1 x Helmet Mount Kit (Clamps, adhesive pads) (or 2 sets for a double pack)
• 1 x Microphone & Speaker Set (or 2 sets for a double pack)
• 1 x USB Charging Cable (or 2 cables for a double pack)
• 1 x User Manual (English) (or 2 manuals for a double pack)

Note on Microphones: The package may include either a Boom Microphone (suitable for half-face helmets) or a Button Microphone (suitable for full-face helmets). Please choose the corresponding microphone type according to your helmet.

Contents of a double pack, including two hosts, mounting brackets, charging cable, boom microphone headsets, and manuals.

Visual guide for selecting between boom microphone (for half-face helmets) and button microphone (for full-face helmets).

Specifications

Detailed specifications for the WAYXIN T2 intercom.

Setup Guide

1. Installation

1. Clean and dry the intended mounting area on your helmet.
2. Attach the intercom unit to your helmet using the provided mount kit (clamps or adhesive pad).
3. Place the speakers inside the helmet's ear pockets and the microphone near your mouth. Secure them with the included foam pads.

Visual guide for installing the headset using either the clip bracket or paste bracket.

2. Charging & Power On/Off

1. Fully charge the intercom using the provided USB Type-C cable before first use.
2. Press and hold the multifunction button for 3-5 seconds to power on or off.

Information on 800mAh battery capacity, working time, charging time, and standby time.

Operating Instructions

1. Connecting to Your Phone (Bluetooth Pairing)

1. Enable Bluetooth on your smartphone.
2. Press and hold the phone button on the WAYXIN T2 until the red and blue lights flash.
3. Search for and select "WAYXIN T2" from your phone's Bluetooth device list.
4. Confirm pairing. Once connected, the product LED will show a blue light.

Note: If your mobile phone has relevant Bluetooth permission settings, please ensure they are enabled.

Step-by-step guide for connecting the headset to your phone via Bluetooth.

The headset can connect to your phone and GPS for various functions.

2. Connecting Intercoms (Rider-to-Rider Pairing)

1. Ensure both intercom units are powered on.
2. On one unit, press and hold the intercom button for 4 seconds to enter pairing mode (blue light flashes rapidly).
3. On the other unit, click on a device intercom button to search for the first unit (blue light flashes rapidly).
4. Successful pairing is indicated by both blue lights flashing simultaneously.
5. Click on the intercom button again to enter intercom mode (purple light flashes).

Once paired, the intercom connection is automatic upon next power-on within range (up to 30 meters).

Initial steps for powering on and entering pairing mode for intercom connection.

Visual guide for the intercom pairing process, showing light indicators for searching, successful pairing, and intercom mode.

Illustration of two riders using the intercom function with a 30-meter range.

3. Call Management and Voice Assistant

• Automatic Call Answering: The T2 will automatically answer incoming calls after 3 seconds, allowing for hands-free communication.
• Voice Assistant Activation: Activate your phone's voice assistant (e.g., Siri, Google Assistant) directly through the headset for navigation or other commands.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the device. Do not use chemicals or immerse the main unit in water.
• Storage: Store the headset in a cool, dry place away from direct sunlight when not in use.
• Charging: Use only the provided USB Type-C cable and a standard 5V/1A USB charger. Avoid charging in extremely hot or humid environments.

Troubleshooting

• Cannot Power On: Ensure the device is fully charged. If not, charge it using the provided USB cable.
• No Connection (Phone or Intercom): Check if the devices are within range. Restart both the headset and the connected device (phone or other intercom) and attempt to re-pair.
• Poor Sound Quality: Verify the speaker and microphone placement inside the helmet. Ensure all connecting ports are clean and dry.

User Tips

• Microphone Selection: Remember to choose the correct microphone type (Boom for half-face helmets, Button for full-face helmets) during installation for optimal performance.
• Safety First: Always set up your connections and adjust settings before starting your ride. Do not operate the device or adjust settings while riding to ensure your safety.
• Bluetooth Permissions: If experiencing issues connecting to your phone, check your mobile phone's Bluetooth permission settings and ensure they are open for the "WAYXIN T2" device.

Warranty and Support

The WAYXIN T2 comes with a one-year product warranty for the main unit and a six-month warranty for the headset part, effective from the date of receipt. The warranty does not cover damage caused by dismantling by a third-party, human reasons, or force majeure factors.

Details on the one-year warranty service and conditions not covered.

For detailed instructions, comprehensive operational details, and safety information, please refer to the full user manual available in PDF format: WAYXIN T2 User Manual (PDF).

For further support, please visit the official support page or contact customer service.