1. Introduction
The SUNSHINE C1 Mini is a compact mobile phone color film printer designed for customizing mobile phone back films. It utilizes advanced printing technology to produce high-resolution, true-color images that can be applied to various mobile phone models. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your C1 Mini printer.
2. Safety Information
- Optimal operating temperature is 10℃ to 35℃, with relative humidity between 40% and 60%. Operating outside these conditions may affect print quality.
- Only use official SUNSHINE color ribbons and printing paper to ensure optimal print quality and prevent damage.
- Avoid touching the glossy side of the printing paper to prevent fingerprints and maintain print quality.
- When printing, ensure the printing paper is placed with the printing side facing up and flat within the paper box. The paper box must be correctly installed in the front of the printer.
- Ensure the paper exit slot is unobstructed. Any blockage may interfere with the paper's movement and affect printing results.
- During the printing process, the paper will move back and forth four times. Do not forcibly pull the paper out during this time to avoid damaging the printer or the paper.
- The printer uses thermal sublimation technology, and the print head will heat up during and immediately after printing. Avoid touching the print head to prevent burns.
- Slight color variations between different printers or paper batches are normal.
- For long-term storage, remove the paper box, close the printer's paper box door, and close the paper box cover to prevent dust accumulation.
- Store unused printing paper away from high temperatures and humid environments.
- Only use the provided power adapter with this device. Using other adapters may cause damage.
- Always connect the power adapter during firmware upgrades to prevent interruptions.
3. Package Contents
Verify that all items listed below are included in your package:
- C1 Mini Host (Printer) x1
- Instruction Manual x1
- Power Adapter x1
- Ribbon x1
- Sticker (195x100mm) x36
- Frosted Coating (195x100mm) x36
- Backing Plate (120x200mm) x1
- Scraper (60x100mm) x1
4. Product Overview
Familiarize yourself with the main parts of your SUNSHINE C1 Mini Printer:
- Power Button: Used to turn the printer on and off.
- Indicator Lights: Display power status, Wi-Fi connection, and direct Wi-Fi connection status.
- Ribbon Compartment Door: Provides access for installing and replacing the color ribbon.
- Paper Box Door: Provides access for loading printing paper.
- Heat Dissipation Vents: Ensures proper cooling during operation.
- Rear Paper Exit Slot: Where the printed film exits the printer.
- Direct Connect (Wi-Fi) Button: Initiates a direct Wi-Fi connection for printing without an external network.
- Power Port: Connects to the power adapter.
- Type-C USB Port: For potential data transfer or alternative connection methods.
5. Setup
5.1. Power Connection
- Connect the power adapter to the power port located on the back of the printer.
- Long press the power button (leftmost button) on the printer. The indicator light will illuminate.
- Wait for a moment until the Wi-Fi indicator light (middle light) turns solid yellow, indicating it's ready for connection.
5.2. Loading Printing Paper
- Remove the gray paper box cover from the top of the printer.
- Open the paper box.
- Take a sheet of printing paper. The transparent protective film needs to be removed from the printing paper. The side that peels off the protective film is the printing layer.
- Place this printing layer side up in the paper box. At the same time, please note that the rounded end of the printing paper is the paper feeding direction.
- Insert the paper into the paper box.
- Close the paper box cover.
5.3. Installing Color Ribbon
- Open the printer ribbon area on the right side of the printer.
- The printer ribbon has a notch at one end facing upwards. Insert the ribbon into the compartment, ensuring it clicks securely into place.
- Close the printer ribbon area cover.
5.4. Connecting to the Mobile App
The printer operates via a dedicated mobile application. Please refer to the official product page or included documentation for the correct app name and download instructions. The video demonstrates using an app named "CUT".
- Download and install the official app on your mobile phone.
- Open the app and select your preferred language (e.g., English).
- Click the connection icon within the app to search for devices.
- The app may search for a film cutting machine first (e.g., "CUTTER_E44C"). Select it and log in using the device serial number (e.g., SS8080621141747).
- For first-time printing, the printer needs to be configured with Wi-Fi. Click on "Config WiFi".
- Search for Bluetooth devices (e.g., "F0:13:C1:21:DD:50"). Select the device.
- Enter the password for the Wi-Fi network your phone is currently connected to. The default password is "12345678", which can be changed in the app.
- After completing the input, click "Config WiFi" and wait for the printer to connect.
- Once the connection is successful, click "Search Devices" again and select the "Photo Printer [XXXX]" (where XXXX is the last four digits of the product SN, found on the bottom of the machine).
- The connection to the device should now be successful.
Note: If you are in an environment without an external network, you can use the direct connect (Wi-Fi) function. The Wi-Fi indicator light will be solid blue when connected successfully. The app supports simultaneous connection of up to 5 devices.
6. Operating Instructions
Once the printer is set up and connected to the app, you can begin customizing and printing your mobile phone films.
6.1. Printing a Custom Film
- In the app, select the mobile phone model for which you want to print a film (e.g., Huawei Mate 50).
- Choose the desired film type (e.g., Back-1 for a back film).
- After confirming the model number and film type, click "Print".
- Select an image from your phone's gallery to upload to the app.
- Adjust the picture to the right position on the phone outline displayed in the app. You can zoom and rotate the image as needed.
- After adjusting, click on the lower right corner to initiate printing.
- Wait for the printing of the image to complete.
6.2. Applying the Printed Film
After printing, you will need a compatible film cutting machine (e.g., SS-890C Pro) to cut the film to the precise shape of your phone model.
- Cover the printed film with the transparent protective film.
- Position the film on the base plate, aligning the image to the edge of the base plate. Use a scraper to stick the image firmly to the base.
- Insert the base plate with the film into the film cutting machine.
- Initiate the cutting process on the film cutting machine.
- After cutting, carefully take out the printed and cut film from the base plate.
- Clean the back of your phone thoroughly to remove any dust or smudges.
- Carefully peel off the backing from the cut film and paste it onto the back of your phone, aligning it precisely with the camera and edges.
- After the pasting position is accurate, use a hot air gun to gently heat the edges of the film. This will cause the edges to shrink and stick firmly to the phone, ensuring a smooth finish.
7. Maintenance
7.1. Ribbon Replacement
- Open the ribbon compartment door on the right side of the printer.
- Push up the latch to release the old ribbon cartridge, then carefully remove it.
- Insert a new ribbon cartridge, ensuring the notch is facing upwards and it clicks securely into place.
- Close the ribbon compartment door.
7.2. Paper Loading
Refer to section 5.2 for detailed instructions on loading printing paper.
7.3. Storage
- When the printer is not in use, you can place the paper box on top of the printer to save space.
- For long-term storage, it is recommended to remove the paper box, close the printer's paper box door, and close the paper box cover to prevent dust from entering the machine and affecting future print quality.
8. Troubleshooting
8.1. Connection Issues
- Printer not recognized by app: Ensure the printer is powered on and the Wi-Fi indicator light is solid yellow. If configuring Wi-Fi for the first time, double-check the password. Try restarting both the app and the printer.
- No external network: If you are in an environment without an external network, use the direct connect (Wi-Fi) mode. The Wi-Fi indicator light will be solid blue when connected successfully.
- App not connecting: Verify that you have downloaded the correct official app. Due to app updates, actual operations might differ slightly from this manual; follow in-app prompts.
8.2. Printing Quality Issues
- Poor print quality/color issues: Ensure the operating temperature is between 10℃ and 35℃ and relative humidity is 40%-60%. Using non-official ribbons or paper can significantly impact quality.
- Fingerprints on print: Avoid touching the glossy side of the printing paper.
8.3. Paper Feeding Issues
- Paper not feeding: Do not load more than 20 sheets of paper in the paper box. Ensure the paper is loaded with the printing side up and the rounded end facing the feeding direction.
- Paper jams: Ensure the paper exit slot is clear of any obstructions. The paper moves back and forth four times during printing; do not pull it out prematurely.
8.4. Overheating/Ribbon Breakage
- Ribbon breakage due to high temperatures: To prevent this, after printing 3 pages in a row, please stop the machine for 5 minutes and then restart it.
- Hot print head: The print head remains hot for a period after printing. Avoid touching it.
If you encounter any problems not covered here or require further assistance, please contact technical support.
9. Specifications
| Feature | Specification |
|---|---|
| Product Name | Mobile Phone Color Film Printer |
| Model | C1 Mini (DHP511) |
| Net Weight | ≈ 1190g |
| Gross Weight | ≈ 2650g (Host: ≈ 1670g / Consumables: ≈ 645g) |
| Product Size | 205 x 124 x 85mm |
| Package Size | 250 x 190 x 150mm |
| Input Parameters | 24V 1.6A |
| Operating Temperature | 10~35℃ |
| Printing Technology | Professional three-color dye, sublimation printing technology |
| Resolution | 300dpi |
| Color Levels | 16.7 million wide color levels, 256 color grayscales |
10. User Tips
- To prevent ribbon breakage due to high temperatures, it is recommended to pause the printer for 5 minutes after printing 3 consecutive pages, then restart it.
- Always ensure the transparent protective film is removed from the printing paper before loading, and the printing layer (the side where the film was peeled) faces upwards.
- Pay attention to the rounded corner of the printing paper; this indicates the correct paper feeding direction.
- For precise application of the printed film to your phone, use the provided scraper to smooth out any bubbles and ensure proper adhesion.
- After applying the film to your phone, gently use a hot air gun around the edges. This helps the film shrink slightly and adhere more securely, providing a seamless finish.
- If you experience connection issues, verify the app is up-to-date and try searching for the printer again after restarting both the app and the device.
11. Warranty and Support
The product warranty is provided in accordance with the relevant consumer protection laws. Please retain your purchase receipt and packaging for warranty claims.
11.1. Warranty Period
- Within 7 days of receipt: Free return or exchange for confirmed performance faults.
- 8-15 days of receipt: Free exchange or repair for confirmed performance faults.
- Within 12 months of receipt: Free repair for confirmed performance faults.
Important: It is recommended to keep the original packaging for at least 30 days from the date of receipt for safe transport during any potential warranty service.
11.2. Warranty Exclusions
The warranty does not cover:
- Damage caused by unauthorized repairs, misuse, collision, neglect, abuse, liquid ingress, accidents, alterations, or incorrect use of non-product accessories.
- Products with torn or altered labels/anti-counterfeit marks.
- Damage occurring after the warranty period has expired.
- Damage due to force majeure (e.g., natural disasters).
- Performance faults not listed in the official