Hi-Link HLK-LD2460

Contents

HLK-LD2460 24G Smart Home Human Presence Tracking Sensor Module

User Manual

Brand: Hi-Link | Model: HLK-LD2460

1. Product Overview

The HLK-LD2460 is a 24GHz millimeter wave radar product designed for human perception, offering both distance and angle testing functions. It comprises two 1-transmitter and 2-receiver millimeter wave radar chips, a high-performance microstrip antenna, a high-performance MCU, a high-performance Bluetooth SOC, and peripheral auxiliary circuits. Utilizing FMCW waveform, it can accurately identify and estimate the positions of 3-5 human targets.

This module is suitable for various environments such as homes, offices, and hotels, enabling precise sensing of multiple movements, micro-movements, or stationary human bodies.

HLK-LD2460 module with test board and Type-C wire
Figure 1: HLK-LD2460 module with test board and Type-C wire.

2. Module Features

  • 24 GHz ISM band operation.
  • Integrated intelligent millimeter wave radar chip and intelligent algorithm firmware.
  • Precise motion target localization and tracking capabilities.
  • Longest detection range of 6 meters.
  • Ultra-small module size: 32mm x 49.5mm.
  • Supports wall mounting.
  • Ranging accuracy: 0.3m.
  • Resolution: 0.75m.
  • Horizontal detection angle: 120°.
  • Vertical detection angle: 90°.
  • Cost-effective solution.
  • Multiple connection options with pin and socket interfaces.
HLK-LD2460 module demonstrating multi-target real-time tracking
Figure 2: Multi-target real-time tracking and trajectory visualization.

3. Technical Specifications

Attribute Value
ModelHLK-LD2460
TypePLC Input & Output Modules
Brand NameHi-Link
OriginMainland China
Default pinsGND, 5V, TX, RX
Transmit frequency24G (24.00GHz - 24.25GHz)
Working bandwidth250MHz
EIRP13dBm
Modulation TypeFMCW (Frequency modulated continuous wave)
Input voltage5V
Working current≤250mA
Horizontal detection angle120°
Vertical detection angle90°
Range resolution0.75m
Distance accuracy≤0.3m
Angle accuracy≤5°
Micro-motion distance6m
Motion trigger0.5s
Existence of perception time<30s
OTA functionSupport
StandardBased on CE FCC
Size32*49.5mm
Work temperature-40~85°C

4. Setup and Installation

4.1. Module Dimensions

Dimension diagram of the HLK-LD2460 module
Figure 3: Dimension annotation of HLK-LD2460 module.

4.2. Pin Description

HLK-LD2460 pin numbering diagram
Figure 4: HLK-LD2460 pin numbering diagram.
PIN Serial Number Name IO Type Function Description
15VPWRpower inputDC5V
2GNDGNDGNDGND
3Tx1OSerial port 1 output-
4Rx1ISerial port 1 input-
5VDD33PWRpower input3.3V/NC, Not connected during non-debugging
6GNDGNDGNDGND
7Tx2OSerial port 2 outputRadar data reporting and command response
8Rx2ISerial port 2 inputCommand reception
9IO1I/OGPO1/Reserved-
10IO2I/OGPO2/Reserved-
11IO3I/OGPO3/Reserved-
12IO4I/OGPO4/Reserved-

Note: To receive serial data normally, the serial port needs to be grounded together with the module.

4.3. Wiring Diagram

Schematic diagram of the connection between the radar module and peripherals
Figure 5: Schematic diagram of the connection between the radar module and peripherals (MCU to LD2460).

4.4. Installation Methods

There are two recommended installation methods for the HLK-LD2460 radar module: side-mounted installation and top-mounted installation. The radar parameters should be configured via the upper computer based on the actual installation height and angle.

Side Hanging Installation

For side hanging installation, the recommended angle between the module and the wall is 25-40°, and the recommended installation height is 2.2-2.7 meters.

Diagram of side hanging installation for radar module
Figure 6: Side hanging installation diagram.

Top Installation

For top installation, the module should be horizontal to the wall. It is recommended to install it at a height of 2.5-3 meters.

Diagram of top installation for radar module
Figure 7: Top installation diagram.

4.5. Coordinate System Explanation

Side Mounted Coordinate System

When installed on the side, the X-axis range is [-6,6], the Y-axis range is [0,6]. The front of the radar antenna surface is in the positive Y-axis direction, and the right side of the radar antenna surface is in the positive X-axis direction. The normal direction is 0 degrees, the negative X direction is a negative angle, the positive X direction is a positive angle, and the angle range is [-60°, 60°].

Top Mounted Coordinate System

When installed on top, the X-axis range is [-4,4], the Y-axis range is [-4,4]. The right side of the radar antenna surface is the positive X-axis direction, and the lower side of the radar antenna surface is the positive Y-axis direction. The positive direction of X is 0 degrees, and the angle range is [0°, 360°].

5. Operating Instructions

5.1. Working Range of Radar Module

The beam coverage range of the HLK-LD2460 radar module is a three-dimensional fan-shaped area with a horizontal angle of 90° and a vertical angle of 50°.

Schematic diagram of HLK-LD2460 radar coverage area
Figure 8: Schematic diagram of HLK-LD2460 radar coverage area.

5.2. Main Functions

To test the radar separately, TTL serial port tools and testing upper computer software are required. The upper computer can display relevant information such as the number and location of detected targets. Key functions include:

  • Radar Parameter Configuration: Set installation method (Top mounted/Side mounted), sensitivity (high, medium, low), installation settings (height, angle), serial port baud rate, and detection area (distance, start angle, end angle).
  • OTA Upgrade: Supports upgrading the top and side firmware of the radar.
  • Factory Reset: Resets radar parameters (sensitivity, installation height, detection range, baud rate, etc.).
  • Module Restart: Allows restarting the module.
  • Target Detection Output: Displays the current detection range map of the radar, as well as the number and location of detected targets.
  • Serial Port Receiving & Sending: Facilitates troubleshooting by printing data received and sent through the serial port section.

5.3. Communication Protocol

The module outputs monitoring status information via a serial port. The transmission baud rate is 115200bps, with 8 data bits, 1 stop bit, and no checksum or flow control. The data length is variable, depending on the number of detected targets. For detailed information, please refer to the official HLK-LD2460 Serial Port Protocol document.

Video 1: Overview of various radar modules from Hi-Link.

6. Typical Application Scenarios

6.1. Smart Home Appliance Applications

The radar can be installed inside household appliances to monitor real-time personnel status within its detection range. The device adjusts its working mode (working, low power consumption, standby, shutdown, etc.) in real-time or quasi-real-time based on radar detection results (manned/unmanned), enabling intelligent home appliance operation. Conventional applications include:

  • Smart TV
  • Smart speaker
  • Intelligent air conditioning
  • Intelligent toilet
  • Intelligent door lock
  • Other smart home appliances

6.2. Home Place Applications

For home, hotel, office, bathroom, and other places, this product detects in real-time whether there are moving targets, the direction of personnel movement (approaching or away), and personnel presence. This enables functions such as security, electrical control, and personnel monitoring. This scheme offers high sensitivity and effectively avoids privacy issues. By using IoT transmission methods and relevant IoT support platforms, effective applications can be achieved.

  • Home security
  • Hotel management and monitoring
  • Monitoring of community healthcare personnel
  • Office monitoring

6.3. Application of Energy-Saving Control

Based on motion target detection and biometric detection, this product can be applied to energy-saving control. Main scenarios include:

  • Energy-saving household appliances
  • Office electrical energy-saving control
  • Energy-saving control of street lamps

7. Precautions

7.1. Start-up Time

When the module is initially powered on, it requires initialization of internal registers and evaluation of environmental noise. Therefore, the stable start-up time of the module is approximately 1 second.

7.2. Effective Detection Distance

The detection distance is influenced by factors such as target size, motion mode, and usage environment. Fluctuations in the actual detection distance within a certain range are considered normal.

7.3. Radar Biological Detection Performance

Human respiration and heartbeat are ultra-low frequency physical signals. The human body also has weaker reflection of radar signals compared to furniture and appliances. Occasional detection failures related to biological signals are a normal phenomenon.

7.4. Power Supply

The radar module has higher power quality requirements than conventional low-frequency circuits. The power supply must have no obvious burrs or ripples. To ensure normal operation of the VCO circuit inside the module, the input voltage range should be 4.2V~5.4V. The power supply ripple should be within 100kHz without obvious spectral peaks, and the peak current should support 180mA.

8. Troubleshooting

8.1. Interference Factors

As radar is an electromagnetic wave detection sensor, active non-living organisms can cause false alarms. Movement of objects such as electric fans, pets, vegetation, curtains, and internal motors of air conditioners can lead to misjudgment.

8.2. Non-Interfering Factors

Radar electromagnetic waves can penetrate human clothing, curtains, thin wooden boards, and glass without significant interference.

9. User Tips

  • For optimal performance, ensure the power supply is stable and within the specified voltage and ripple limits.
  • When configuring, experiment with different sensitivity levels to find the best balance for your specific environment and avoid false detections.
  • Consider the module's start-up time (approx. 1 second) in your application design to ensure proper initialization before expecting detection data.

10. Warranty and Support

10.1. Disclaimer

While efforts are made to ensure accurate and error-free documentation, the technical complexity of the product and varying working environments may lead to individual inaccuracies or incomplete descriptions. This document is for user reference only. The manufacturer reserves the right to make changes to the product without prior notification and makes no legal commitments or guarantees. Users are encouraged to provide valuable feedback on products and tools.

10.2. Contact Information

Shenzhen Hi-Link Electronic Co., Ltd.

  • Address: 17F, Building E, Xinghe WORLD, Minzhi Street, Longhua district, Shenzhen 518131, Mainland China
  • Telephone: 0755-23152658
  • Email: sales@hlktech.com
  • Website: wwwhlktech.net

For further details, you may also refer to the official user manual PDF: HLK-LD2460 User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.