1. Product Overview
This manual provides instructions for the installation, operation, maintenance, and troubleshooting of your Midea Wire Controller. This device is designed for commercial air conditioning applications, offering precise control over your HVAC system.

Figure 1: Front view of Midea WDC-86E/KD Wire Controller
2. Setup and Installation
Proper installation is crucial for the optimal performance of your wire controller. Please follow these steps carefully.
2.1 Mounting Instructions
- Adjust Support Bar: Select and adjust the support bar from the provided accessories. Ensure its length matches the distance between the screw column of the standard electrical box and the wall. A cutting tool may be used to precisely adjust the length of the plastic support bar if necessary.
- Fix to Rear Cover: Once the support bar length is adjusted, securely fix it to the rear cover of the wire controller.
- Wall Mounting: Fix the support bar to the wall in the direction indicated by the arrow on the support bar.

Figure 2: Back panel (DC18V model) with installation guide

Figure 3: Back panel (DC5V model) with installation guide
2.2 Wiring and Power Supply
The wire controller requires a specific DC power supply depending on the model:
- WDC-86E/KD (and similar models): Power Supply DC 18V.
- WDC-86E/K (and similar models): Power Supply DC 5V.
Connect the control wires to the terminals labeled CN2, X1, and X2 as per your air conditioning unit's wiring diagram. Ensure all connections are secure before powering on the device.
3. Operating Instructions
The Midea Wire Controller features an intuitive interface for managing your air conditioning system.
3.1 Button Functions
- Power Button (circle with vertical line): Press to turn the unit ON or OFF.
- Up Arrow (▲): Increases temperature setting, navigates up in menus, or adjusts other parameters upwards.
- Down Arrow (▼): Decreases temperature setting, navigates down in menus, or adjusts other parameters downwards.
- Fan Icon (fan blades): Cycles through fan speeds (e.g., Low, Medium, High, Auto) or fan modes.
- Menu/Settings Icon (three horizontal lines): Accesses system settings, advanced options, or menu navigation.
- Return/Back Button (U-turn arrow): Returns to the previous screen or cancels an action.
- Function/Mode Button (F): Changes the operating mode (e.g., Cool, Heat, Dry, Fan, Auto).
- Swing/Louver Button (fan with waves): Controls the air swing function of the indoor unit.
- Select/Confirm Button (circle with dot): Confirms selections or enters sub-menus.
3.2 Basic Operation
- Power On/Off: Press the Power button to switch the unit on or off.
- Set Temperature: Use the Up (▲) and Down (▼) arrows to adjust the desired temperature.
- Change Mode: Press the Function/Mode (F) button to cycle through available operating modes.
- Adjust Fan Speed: Press the Fan icon button to select your preferred fan speed.
4. Maintenance
Regular maintenance ensures the longevity and efficient operation of your wire controller.
- Cleaning: Gently wipe the surface of the controller with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the display or buttons.
- Connection Check: Periodically check the wiring connections at the back of the unit to ensure they are secure and free from corrosion. Disconnect power before checking connections.
- Environmental Conditions: Ensure the controller is not exposed to direct sunlight, extreme temperatures, or high humidity, which can affect its performance and lifespan.
5. Troubleshooting
If you encounter issues with your Midea Wire Controller, refer to the following common problems and solutions.
5.1 Common Issues
- Controller Not Powering On:
- Check the power supply to the unit. Ensure the correct voltage (DC18V or DC5V) is being supplied.
- Verify that all wiring connections are secure.
- Confirm the circuit breaker for the air conditioning system is not tripped.
- Display Not Responding or Blank:
- Try cycling the power to the air conditioning unit.
- Ensure the controller is securely mounted and its internal connections are firm.
- Unable to Control Air Conditioner:
- Check for any error codes displayed on the controller or the air conditioning unit. Refer to your air conditioner's manual for specific error code meanings.
- Ensure the communication wires (CN2, X1, X2) are correctly connected and not damaged.
6. Specifications
| Feature | Specification |
|---|---|
| Model Numbers | WDC-86E/KD, KJR-90W/BK(WIFI), 17317100A23216, 17317100A25635, 17117100001470 |
| Type | Wire Controller, Air Conditioner Parts |
| Application | Commercial |
| Power Supply | DC 18V or DC 5V (model dependent) |
| Origin | Mainland China |
| Package Dimensions (approx.) | Length: 18 cm, Width: 18 cm, Height: 6 cm |
| Package Weight (approx.) | 0.5 kg |
7. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your specific air conditioning unit or contact your Midea product supplier. Ensure you have your model number and purchase details available when seeking support.
8. User Tips
- Wi-Fi Connectivity: If you have a KJR-90W/BK(WIFI) model, ensure your Wi-Fi network is stable and configured correctly to utilize remote control features. Refer to the specific Wi-Fi setup guide for your air conditioning system.
- Power Compatibility: Always double-check the required DC voltage (18V or 5V) for your specific controller model before connecting power to prevent damage.
- Professional Installation: For complex installations or if you are unsure about wiring, it is recommended to consult a qualified HVAC technician.