Introduction
This manual provides detailed instructions for the proper use and care of your SMAEL 8049 Waterproof Sports Digital Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece. The SMAEL 8049 features an analog-digital display, daily alarm, stopwatch, complete calendar, week display, and is shock-resistant with 5Bar water resistance.
Figure 1: Front view of the SMAEL 8049 watch.
Watch Components and Button Functions
Familiarize yourself with the watch's buttons and their respective functions:
Figure 2: Diagram showing the functional analysis of the watch buttons.
- LIGHT Button (Left Top): Activates the backlight for the digital display.
- MODE Button (Left Bottom): Cycles through different modes: Timekeeping, Alarm, Stopwatch, Time Setting.
- START/STOP Button (Right Top): Used to start/stop functions (e.g., stopwatch) or adjust values during setting.
- RESET/SELECT Button (Right Bottom): Used to reset functions (e.g., stopwatch) or select items during setting.
Setup Instructions
Setting Digital Time and Date:
- From the normal timekeeping mode, press the MODE button three times to enter the time setting mode. The seconds digits will start flashing.
- Press the RESET/SELECT button to cycle through the settings: Seconds → Hour → Minute → Month → Date → Day of the Week.
- While a digit is flashing, use the START/STOP button to adjust the value.
- Once all settings are adjusted, press the MODE button to exit the setting mode and return to normal timekeeping.
Setting Analog Time:
The analog hands are typically set independently. Locate the crown on the side of the watch (usually on the right side, between the START/STOP and RESET buttons). Pull the crown out to the first or second click (depending on the model) and rotate it to adjust the analog hands. Push the crown back in when finished.
Setting the Alarm:
- From the normal timekeeping mode, press the MODE button twice to enter the alarm setting mode. The alarm hour digits will flash.
- Press the RESET/SELECT button to switch between setting the hour and minute.
- Use the START/STOP button to adjust the hour or minute value.
- Press the MODE button to exit the alarm setting mode.
- To turn the alarm ON/OFF, in alarm mode, press the START/STOP button. An alarm icon (often 'ALM') will appear/disappear on the display.
Operating Instructions
Using the Backlight:
Press the LIGHT button (Left Top) to illuminate the digital display. The backlight will typically stay on for a few seconds.
Figure 3: Watch display with cold light backlight activated.
Using the Stopwatch (Chronograph):
- From the normal timekeeping mode, press the MODE button once to enter the stopwatch mode. The display will show '00:00:00'.
- Press the START/STOP button to start the stopwatch.
- Press the START/STOP button again to pause the stopwatch.
- Press the RESET/SELECT button to reset the stopwatch to '00:00:00'.
- Press the MODE button to exit stopwatch mode.
Daily Alarm:
Once the alarm is set and activated (as described in the Setup section), it will sound at the set time each day. To stop the alarm when it sounds, press any button.
Hourly Chime:
To activate or deactivate the hourly chime, navigate to the alarm mode (press MODE twice). While in alarm mode, press the RESET/SELECT button. An icon (often a bell or chime symbol) will appear/disappear to indicate the status of the hourly chime.
Maintenance
Water Resistance (50M / 5Bar):
Your SMAEL 8049 watch is rated for 50 meters (5 ATM or 5 Bar) water resistance. This means it is suitable for daily use, splashing, rain, and short periods of recreational swimming. It is not suitable for diving, snorkeling, hot water activities (like showering or hot tubs), or high-pressure water activities. Avoid pressing buttons underwater to prevent water intrusion.
Figure 4: The watch demonstrating its 50M waterproof protection.
Cleaning:
Wipe the watch regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry wipe. Ensure the watch is completely dry before storage.
Battery Replacement:
When the digital display becomes dim or stops functioning, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
Troubleshooting
- Digital display is blank or dim: The battery may be low or depleted. Replace the battery.
- Time is incorrect: Re-set the digital and/or analog time following the 'Setup Instructions'.
- Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though not a stated feature for this model). If the issue persists, it may indicate an internal malfunction or water damage if the watch was exposed to conditions beyond its water resistance rating.
- Analog hands not moving: Check if the crown is pushed all the way in. If it is, the battery for the analog movement might be depleted, or there could be a mechanical issue.
Specifications
Figure 5: Detailed dimensions and materials of the SMAEL 8049 watch.
| Feature | Detail |
|---|---|
| Brand Name | SMAEL |
| Model Number | 8049 |
| Item Type | Digital Wristwatches |
| Movement | Digital (Quartz + Electronics) |
| Display Type | Analog-Digital |
| Water Resistance Depth | 5Bar (50 meters) |
| Case Material | Polyester |
| Bottom Cover Material | Stainless Steel |
| Dial Window Material Type | Hardlex (Plexiglass) |
| Band Material Type | PU (Resin) |
| Clasp Type | Buckle |
| Case Shape | Round |
| Features | Shock Resistant, Repeater, Chronograph, Complete Calendar, Week Display, Daily Alarm, LED Luminous |
| Certification | CE |
| Origin | Mainland China |
| Measurement | Value |
|---|---|
| Dial Diameter | 53mm (Dial Width: 59mm) |
| Case Thickness | 15mm (Dial Thickness: 18mm) |
| Band Width | 22mm |
| Band Length | 25.4cm |
| Wearing Range | 140mm - 236mm |
| Weight | 77g |
User Tips
- Read the Manual: Always refer to this manual for initial setup and feature usage to avoid confusion.
- Avoid Extreme Temperatures: Do not expose the watch to extreme hot or cold temperatures, as this can affect battery life and internal components.
- Button Usage Underwater: To maintain water resistance, avoid pressing any buttons while the watch is submerged in water.
- Regular Cleaning: A quick wipe down after heavy use, especially after exposure to sweat or saltwater, can help preserve the watch's appearance and functionality.
Warranty and Support
For any issues or questions not covered in this manual, please contact the seller or manufacturer's customer support. Keep your purchase records for warranty purposes. Specific warranty terms and conditions may vary by region and seller.
Product Video Demonstration
Watch this video for a visual guide on the watch's features and functionality:
Video: Demonstrating the SMAEL 8049 watch features, including its analog-digital display, backlight, and water resistance.