Hantek DSO4254C

Contents

Hantek DSO4254C Digital Oscilloscope Instruction Manual

Model: DSO4254C

1. Product Overview

The Hantek DSO4254C is a versatile 4-channel digital storage oscilloscope designed for electrical testing and analysis. It integrates a 250MHz bandwidth oscilloscope with a 1GSa/s real-time sample rate, a 1CH arbitrary/function waveform generator, external trigger capabilities, a digital voltmeter (DVM), and an automatic range function. Its advanced digital trigger system ensures high sensitivity and low jitter, making it suitable for a wide range of applications from basic circuit debugging to complex signal analysis.

Front view of the Hantek DSO4254C Digital Storage Oscilloscope

Figure 1: Front view of the Hantek DSO4254C Digital Storage Oscilloscope.

2. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact your vendor.

  • Hantek DSO4254C Digital Oscilloscope Unit
  • USB Computer Communication Line (x1)
  • Oscilloscope Probes (x4)
  • 110-230V Wide Voltage Power Line (x1)
  • Signal Output Line (x1)
  • Certificate (x1)
Hantek DSO4254C Oscilloscope with included accessories: USB cable, 4 probes, power cable, signal output cable, and certificate.

Figure 2: Included accessories with the Hantek DSO4254C Oscilloscope.

3. Setup and Installation

  1. Power Connection: Connect the provided 110-230V wide voltage power line to the oscilloscope's power input and a suitable power outlet.
  2. Probe Connection: For oscilloscope measurements, connect the BNC end of the probes to the CH1, CH2, CH3, or CH4 input channels on the front panel.
  3. Function Generator Output: To use the built-in arbitrary/function waveform generator, connect the signal output line (BNC to BNC) from the "Gen Out" port to the device under test.
  4. USB Connectivity: Use the USB computer communication line to connect the oscilloscope to a PC for data transfer, system updates, or remote control via SCPI commands.
  5. External Trigger: For external triggering, connect the trigger source to the "Ext Trig" input.
  6. Probe Calibration: Before first use, it is recommended to calibrate all four probes using the dedicated calibration output on the oscilloscope. This ensures accurate measurements.
Angled view of the Hantek DSO4254C Digital Storage Oscilloscope showing input channels and controls.

Figure 3: Oscilloscope front panel with input channels and function generator output.

4. Operating Instructions

4.1 Oscilloscope Functions

The DSO4254C features a 7-inch 64K color TFT display with 800x480 resolution. It offers a 250MHz bandwidth and 1GSa/s sample rate across its four digital channels.

  • Channel Selection: Use the dedicated channel buttons (CH1, CH2, CH3, CH4) to enable or disable channels and access their individual settings.
  • Vertical Controls: Adjust the vertical scale (V/div) and position for each channel using the corresponding knobs. The minimum measurement range is 500μV/div.
  • Horizontal Controls: Adjust the horizontal time base (s/div) and position using the horizontal control knobs.
  • Auto-Scale Function: Press the "Auto" button for automatic adjustment of vertical and horizontal settings to display a stable waveform.
  • Measurements: The oscilloscope supports over 32 types of automatic measurement functions, including voltage, frequency, period, and more. Access these via the "Measure" menu.
  • Mathematics Functions: Perform mathematical operations on waveforms (e.g., addition, subtraction) using the "Math" menu. You can select any two of the four channels as operands.
  • X-Y Plot: The device supports X-Y plot mode for phase analysis, as shown in Figure 5.
Hantek DSO4254C displaying a complex waveform on its screen.

Figure 4: Oscilloscope displaying a typical waveform with measurement parameters.

Hantek DSO4254C displaying an X-Y plot, useful for phase analysis.

Figure 5: X-Y plot display for phase relationship analysis.

4.2 Trigger System

The advanced digital trigger system offers high trigger sensitivity and low jitter. It supports over 14 types of trigger functions:

  • Edge Trigger
  • Overtime Trigger
  • Pulse Trigger
  • Pattern Trigger
  • Interval Trigger
  • Video Trigger
  • CAN Bus Trigger
  • SPI Bus Trigger
  • I2C Bus Trigger
  • UART Bus Trigger
  • And more...

These diverse trigger options allow for precise capture of specific events in complex signals, including various serial bus protocols.

Hantek DSO4254C demonstrating serial bus decoding capabilities (e.g., CAN bus).

Figure 6: Example of serial bus decoding (CAN bus) on the oscilloscope.

4.3 Function/Arbitrary Waveform Generator

The integrated function/arbitrary waveform generator provides a 25MHz output with 12-bit resolution and 200MHz DDS. It can generate various waveforms:

  • ARB (Arbitrary) Waveforms
  • Square Wave
  • Sine Wave
  • Triangular Wave
  • Trapezoidal Wave
  • Impulse Wave
  • DC (Direct Current)

This generator is useful for simulating sensors and testing circuits with specific input signals. Arbitrary waveforms can be created using PC software and loaded via USB for custom signal generation.

4.4 Digital Voltmeter (DVM)

The built-in Digital Voltmeter (DVM) allows for convenient voltage measurements directly on the oscilloscope. This function can be accessed through the utility menu.

4.5 Connectivity

The DSO4254C includes integrated USB Host/Device ports for easy communication with a PC. This allows for:

  • U-stick storage for saving waveforms and settings.
  • System updates to ensure the latest firmware and features.
  • Remote control using SCPI (Standard Commands for Programmable Instruments) commands.

Optional ports such as RS232, LAN, HDMI, touch screen, WIFI communication, and SD card storage may be available depending on the specific model configuration.

5. Specifications

AttributeValue
Brand NameHantek
Model NumberDSO4254C
HANTEK ModelDSO4254C
Band Width250MHZ
Digital Channels4
Real Time Sampling Rate1GSa/S
Max Waveform Capture Rate30,000wfm/s
Record Length16K
Display Size7 Inches & Above
Display Resolution640*480 Pixels
CertificationCE
DIY SuppliesElectrical
OriginMainland China
Battery IncludedNo
IS Battery DemountableNo
High-concerned chemicalNone
Comprehensive technical specifications for the Hantek DSO4254C Oscilloscope.

Figure 7: Detailed technical specifications table.

6. Maintenance and Care

  • Keep the oscilloscope clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Store the oscilloscope in a safe place when not in use to prevent physical damage.
  • Ensure proper ventilation during operation to prevent overheating.
  • Regularly check cables and probes for any signs of wear or damage.

7. Troubleshooting

  • No Power: Ensure the power cable is securely connected and the power button is fully pressed. The power button is slightly recessed and may require firm pressure.
  • No Waveform Display: Check probe connections, ensure channels are enabled, and try the "Auto" scale function. Verify that the trigger settings are appropriate for the input signal.
  • Incorrect Measurements: Perform probe calibration as described in the Setup section. Check the vertical scale (V/div) and horizontal time base (s/div) settings.
  • Software Issues: If experiencing problems with PC communication or custom waveform generation, ensure all necessary drivers and software are correctly installed. Refer to the manufacturer's website for the latest software and troubleshooting guides.

8. User Tips

  • Language Settings: The oscilloscope's interface primarily supports English and several other European languages. Familiarity with English is recommended for optimal use, as translated versions may not always be perfectly accurate.
  • Custom Waveforms: Utilize the PC software to design and load custom arbitrary waveforms via a USB flash drive. This feature greatly expands the testing capabilities for unique signal requirements.
  • Multi-Channel Analysis: With four channels, this oscilloscope is excellent for analyzing multi-phase systems or complex circuits where observing multiple points simultaneously is crucial.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Hantek website or contact your authorized dealer. Keep your purchase receipt and product serial number handy for any support requests.

10. Product Video

Video 1: Unboxing and demonstration of the Hantek DSO4254C Oscilloscope's features and basic operation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.