1. Introduction
Thank you for choosing the PHYEE F6021 1 Din Car Radio. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure you get the most out of your new multimedia system. Please read this manual thoroughly before use and keep it for future reference.
Video: Demonstrates the user interface and various functions of the F6021 car radio, including radio tuning, music playback, equalizer settings, and CarPlay/Android Auto navigation.
2. Specifications
| Feature | Specification |
|---|---|
| Model Name | F6021 |
| Display Screen | 6.86" IPS screen, 1280*480 Resolution |
| Power Supply Voltage | 12~14.4V DC, Negative Ground |
| Max Current Consumption | 15A |
| Out Power | 45W*4 |
| Radio Response Bandwidth | 87.5-108.0 MHz (FM radio with RDS function) |
| Bluetooth Part | Bluetooth A2DP, Bluetooth handsfree |
| USB Port | Reading USB port (front USB port only), support max 32GB (FAT32 format) |
| Type C USB Port | Type C USB port for charging |
| CarPlay/Android Auto | Wireless & Wired Apple Carplay (front USB port only), Wireless & Wired Android Auto (front USB port only) |
| Camera Input | Reversing camera input |
| Steering Wheel Control | Supports steering wheel control (universal analog type) |
| OSD Language | Multi-language (English, Spanish, etc.) |
| Item Weight | 0.75kg |
| Item Size | 1 Din (17.80 cm/7.01 inch W x 7.10 cm/2.80 inch H x 10.00 cm/3.94 inch D) |
| Material | Metal and plastic |
| Certification | CE |
Image: Detailed product dimensions for installation reference.
3. Package Contents
The standard package includes:
- 1 x PHYEE F6021 1 Din Carplay Radio Host
- 1 x 20 Pin Power Cable
- 1 x Car Radio User Manual
- 1 x WiFi/BT Antenna
- Optional: 1 x Rear View Camera (6 meters long cable)
Image: Visual representation of the main unit, power cable, WiFi/BT antenna, and user manual.
Image: Product accessories including the host unit, power cable, WiFi/BT antenna, and manual. An optional reversing camera is also shown.
4. Setup and Installation
4.1. Pre-Installation Test
Before installing the product in your car, it is highly recommended to perform a pre-installation test. This helps ensure the unit is functioning correctly after transit.
- Connect the red and yellow wires of the power cord together to the positive pole of a 12V DC car battery.
- Connect the black wire of the power cord to the negative pole of the battery.
- Wait for 10 seconds.
- Press each button on the unit to check if it boots normally. If it powers on, the unit is functioning correctly.
- If the unit does not start, re-check all connections according to these steps. If the problem persists, contact support.
4.2. Physical Installation Steps
- Separate the iron frame from the host unit.
- Insert the iron frame into the car radio installation window.
- Fix the iron frame securely to the car using screws.
- Press the main unit into the iron frame until it snaps into place.
Image: Step-by-step diagram for installing the head unit into the car's dashboard.
4.3. Rear Interface Description and Wiring
The rear panel of the F6021 features various ports for audio, video, and power connections.
Image: Detailed diagram of the rear interface, indicating ports for power, audio/video outputs, external microphone, WiFi/BT antenna, and reversing camera input.
Image: Wiring diagram for the 20-pin power plug.
- Power Supply (20-pin plug):
- Red (ACC): Connect to ignition switch +12V.
- Black (GND): Connect to ground wire B-.
- Yellow (BATTERY): Connect to power supply +12V (keeps power on for memory function).
- Blue (ANT): Connect to radio antenna.
- Green (ILLUMINATION): Connect to illuminate.
- Brown (KEY): Connect to steering wheel control.
- Pink (REVERSE): Connect to reversing camera.
- Orange (BRAKE): Connect to parking brake cable.
- Speaker Cables: The 8 speaker cables must not be grounded, shared, or touch other lines to prevent sound distortion or unit damage.
- Reversing Camera Input:
- Connect the pink "REVERSE" wire to the positive 12V of the reverse light.
- Connect the camera's video output to the "CAM IN" port on the unit.
- Ensure the camera's power cable is correctly wired (red to reverse lamp positive, black to ground).
- If a reversing camera is not installed, leave the REVERSE/BACK cable unconnected to prevent incorrect display or automatic reverse mode.
Image: Comparison of wiring protection. With protection, incorrect wiring triggers power outage protection, preventing damage. Without it, incorrect wiring can burn out the motherboard or fuse.
5. Operating Instructions
5.1. Main Interface
The main interface provides access to all primary functions of the car radio.
Image: Main interface with icons for various functions.
- HOME: Return to the main interface.
- RADIO: Enter radio mode.
- PhoneLink: Access CarPlay / Android Auto / Mirrorlink.
- USB: Play music/video/pictures from front USB.
- USB2: Play music/video/pictures from rear USB.
- BT: Enter Bluetooth music and call interface.
- SD: Micro SD card interface (some models not supported).
- AV IN: Enter external audio/video input mode.
- CCD: Display reversing camera.
- Calculator: Access calculator.
- Clock: Go to clock settings.
- Calendar: Enter calendar interface.
- Setup: Enter system settings.
5.2. Radio Function
Access the radio mode to listen to FM stations.
Image: Radio interface with frequency display and controls.
- ◄◄/►►: Short press to auto-search next station. Long press to manually search (0.05MHz step). Long press P1-P6 to save stations.
- P1-P6: Pre-stored stations (up to 18). Tap to select.
- FM: Band switching (FM1-FM2-FM3).
- AS: Auto search and store full-band stations.
- ST/MO: Stereo/Mono toggle.
- PS: Browse radio stations.
- LOC/DX: Long-range/short-range broadcast.
- EQ: Enter sound effect settings.
- Back button: Return to previous screen.
Image: RDS radio feature, automatically listens to stable frequency stations.
5.3. Music Function
Play music from connected USB devices or via Bluetooth.
Image: Music playback interface.
- Previous/Next Track: Navigate between songs.
- Play/Pause: Control music playback.
- Loop Playback: Single loop or all loop.
- Sequential/Random Play: Choose playback order.
- File List: Return to the file list.
- Progress Bar: Slide to adjust playback progress.
- EQ: Enter sound effect settings.
5.4. Photo Function
View images from connected USB devices.
Image: Photo viewing interface.
- Previous/Next Picture: Navigate between images.
- Play/Pause: Control slideshow.
- Zoom In/Out: Adjust image size.
- Rotate: Rotate image.
- File List: Return to the file list.
5.5. Video Function
Play videos from connected USB devices.
Image: Video playback interface.
- Previous/Next Video: Navigate between videos.
- Play/Pause: Control video playback.
- Loop Playback: Loop current video.
- Sequential/Random Play: Choose playback order.
- File List: Return to the file list.
Tip: If a brake warning occurs, turn off the brake warning switch in the system settings to play video normally.
5.6. Bluetooth Function
Connect your mobile phone via Bluetooth for hands-free calls and audio streaming.
Image: Bluetooth hands-free and music interface.
- Pairing:
- Power on the car radio.
- Enable Bluetooth on your mobile phone.
- Search for devices and select "Carkit" (PIN: 0000 if required).
- Once connected, you can make/receive calls and play music.
- Interfaces: Call, Contact, Call History, BT Music, BT Pairing, Dial Keypad.
- Controls: Backspace, Answer Call, End Call, Previous/Next Track, Play/Pause.
5.7. PhoneLink (CarPlay, Android Auto, Mirrorlink)
Connect your smartphone via USB to project its screen onto the car radio display.
Image: CarPlay and Android Auto interfaces, demonstrating wired and wireless connectivity.
- Apple CarPlay:
- Connect iPhone to the unit via USB data cable.
- The unit will automatically enter the CarPlay interface.
- To re-enter, press "PhoneLink" on the HOME screen.
- Android Auto:
- Download and install "Android Auto" from Google Play (requires Android 6.0+).
- Connect Android phone to the unit via USB data cable.
- The unit will automatically enter the Android Auto interface.
- Mirrorlink (Android):
- Connect Android device via USB. Install Mirrorlink software if prompted.
- Reconnect USB cable to enter screen mirroring mode.
- Operate from both phone and car screen. Sound requires BT connection.
- Mirrorlink (iPhone):
- Connect iPhone to the unit.
- iPhone screen content is projected to the car screen. Sound is transmitted in sync.
5.8. AV IN (Video IN) Function
Connect external audio/video sources.
- AV IN: Connect external audio players (e.g., mobile phone, iPod) via the 3.5MM Front AUX hole.
- VIDEO IN: Rear input video via RCA jack (for models without audio input).
5.9. Steering Wheel Controls
Configure your car's steering wheel buttons to control the car radio.
Image: Steering wheel control learning interface.
- Wiring:
- Connect the positive pole of the original car's steering wheel button control line to the unit's KEY line.
- Connect the negative pole of the original car's steering wheel button control line to the unit's ground (power negative) line.
- Learning Method:
- Press and hold a function key on the steering wheel.
- Click the corresponding function key on the car screen. The screen key will stay on, indicating successful learning.
- Repeat for other buttons.
- Press the confirm button to complete.
- To re-learn, press the reset button and repeat the process.
5.10. System Settings
Customize various settings of the car radio.
- Basic Setup:
- Beep (key tone switch), Reverse Mute, Driving Ban Video, Animation, Mirror Camera, Color Lamp Mode, Color Lamp Interval, Restore Factory.
- Sound Setup (EQ): Adjust audio equalizer settings (User, Standard, Rock, Pop, Live, Dance, Classical, Soft, Jazz, Flat).
- Display Settings: Adjust brightness, contrast, hue, and saturation.
- Background Image: Choose wallpaper.
- Screen Saver: Set screen saver switch and time.
- Language: Select OSD language (English, Spanish, etc.).
- Time: Set year, month, day, hour, and minute.
- Radio Area: Select appropriate radio frequency region (China, America1, America2, Japanese, Russian, Middle East, Europe).
- Factory Setup: Enter password "113266" to access factory settings.
6. Troubleshooting
6.1. Cannot Boot Normally
- Wiring Check: Ensure the yellow, red, and black power wires are correctly connected to positive, key control, and negative poles respectively. Incorrect or insufficient connections will prevent booting.
- Original Car Wiring: Do not connect directly if the original car wiring color does not match the unit's standard. Incorrect connection can cause damage.
- Fuse Check: If the unit does not boot despite correct wiring, check if the fuse on the yellow line is broken. If the fuse is fine, try twisting the yellow and red wires together, then turn on the key and press the unit's power button.
- Short Circuit: If the fuse burns repeatedly, it indicates a short circuit in the unit's protection circuit. Seek professional guidance.
- Final Test: If issues persist, test the unit with a separate 12V battery/power supply by connecting yellow/red to positive and black to negative. If it boots, the car's wiring is problematic. If not, the unit is faulty.
6.2. Automatic Shut-down
- Cable Error: If the blue automatic antenna power supply cable is connected to the unit's power cable, it will cause automatic shutdown. Correct wiring is essential.
- Unstable Voltage: Test with a stable 12V-5A power supply. If the unit still shuts down, it is faulty.
6.3. Noise Issues
- Speaker Power: If the original speaker power is too low, noise may occur at high volumes. Avoid excessively high volumes.
- Grounded Speaker Cable: Ensure speaker cables are not grounded. Connect them directly to the unit's speaker cables.
6.4. Remote Control Not Working
- Battery Check: Use a mobile phone camera to check the remote control's infrared light. If the light does not flash when a button is pressed, replace the battery.
6.5. Settings Not Saved
- Ensure the yellow (positive) and red (key control) wires are correctly connected. If reversed, correct their positions.
6.6. Bluetooth Not Working
- Ensure the unit is on and your phone's Bluetooth is searching for "Device default name". Click to connect.
6.7. Product Emits Smoke
- Replace the FUSE. If the problem persists, the internal circuit is likely burned. Contact after-sales service.
6.8. Sound Cannot Be Adjusted
- Reset the unit or unplug/replug the power cord.
- If the Volume knob is broken, it needs replacement.
6.9. Reversing Camera Not Displaying
- Wiring: Check for wrong or missing wiring. Ensure the pink reverse control line is connected to 12V positive, and the camera's video output is connected to the CAM video input.
- Camera Fault: If the camera's lamp is not lit despite correct wiring, the camera is broken and needs replacement.
6.10. USB Devices Cannot Be Played
- Format the USB flash disk to FAT32. Re-download songs and try again. If it still fails, replace the USB flash drive.
6.11. Radio Does Not Receive Stations
- Antenna Check: Ensure the antenna plug is fully inserted and the antenna/line is not disconnected.
- Search: Use the AS button for auto-search or the before/after buttons for manual tuning.
- Antenna Fault: If the above fails, unplug the antenna plug and insert a screwdriver or metal strip instead to test.
6.12. No Sound After Installation
- Wiring Error/Short Circuit: This is usually due to wiring errors or short-circuited original car speaker wires.
- Speaker Cable Check: Verify speaker cables are not short-circuited or incorrectly connected.
- Speaker Configuration: If only 2 speaker cables are present in the original car, it may not match the unit. Re-route the original car line; one speaker needs 2 wires, 2 speakers need 4 wires.
6.13. No Sound After A While
- Disconnect all speaker cables from the unit. Connect an external speaker to the gray and purple tail lines. If there is sound, the car's speaker line is short-circuited or damaged. If no sound, the unit is broken.
7. User Tips
- For users in CIS countries, if you experience issues with Android Auto, try going to factory settings (password 113266), then navigate to the 5G channel menu and select a specific channel, such as 44. This has been reported to resolve connectivity issues.
- The radio supports RDS, which displays radio station names.
- The unit can play videos from USB.
- The unit has subwoofer output and supports KEY1 and KEY2 for universal steering wheel control adaptation.
8. Warranty and Support
The PHYEE F6021 comes with a 1-year warranty from the date of purchase. For any technical issues, troubleshooting assistance, or warranty claims, please contact PHYEE Official Store customer service.
PHYEE Official Store is committed to providing quality products and support. We appreciate your feedback and are continuously working to improve our products.